- use __func__ instead of writing the full function name
- drop debug message in cec_config_log_addr since the same information
  will be reported later
- use debug level 1 for errors and infrequent events, use level 2 for
  debugging CEC message traffic
- log when a transmit is retried, very useful to know when debugging
- debug messages now all start with lower case

Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
 drivers/media/cec/cec-adap.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index f5fe01c9da8a..f85eae710043 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -392,7 +392,7 @@ int cec_thread_func(void *_adap)
                         * happen and is an indication of a faulty CEC adapter
                         * driver, or the CEC bus is in some weird state.
                         */
-                       dprintk(0, "message %*ph timed out!\n",
+                       dprintk(0, "%s: message %*ph timed out!\n", __func__,
                                adap->transmitting->msg.len,
                                adap->transmitting->msg.msg);
                        /* Just give up on this. */
@@ -468,7 +468,7 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, 
u8 arb_lost_cnt,
        struct cec_msg *msg;
        u64 ts = ktime_get_ns();

-       dprintk(2, "cec_transmit_done %02x\n", status);
+       dprintk(2, "%s: status %02x\n", __func__, status);
        mutex_lock(&adap->lock);
        data = adap->transmitting;
        if (!data) {
@@ -477,7 +477,8 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, 
u8 arb_lost_cnt,
                 * unplugged while the transmit is ongoing. Ignore this
                 * transmit in that case.
                 */
-               dprintk(1, "cec_transmit_done without an ongoing transmit!\n");
+               dprintk(1, "%s was called without an ongoing transmit!\n",
+                       __func__);
                goto unlock;
        }

@@ -504,6 +505,12 @@ void cec_transmit_done(struct cec_adapter *adap, u8 
status, u8 arb_lost_cnt,
            !(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) {
                /* Retry this message */
                data->attempts--;
+               if (msg->timeout)
+                       dprintk(2, "retransmit: %*ph (attempts: %d, wait for 
0x%02x)\n",
+                               msg->len, msg->msg, data->attempts, msg->reply);
+               else
+                       dprintk(2, "retransmit: %*ph (attempts: %d)\n",
+                               msg->len, msg->msg, data->attempts);
                /* Add the message in front of the transmit queue */
                list_add(&data->list, &adap->transmit_queue);
                adap->transmit_queue_sz++;
@@ -911,7 +918,7 @@ void cec_received_msg(struct cec_adapter *adap, struct 
cec_msg *msg)
        memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);

        mutex_lock(&adap->lock);
-       dprintk(2, "cec_received_msg: %*ph\n", msg->len, msg->msg);
+       dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);

        /* Check if this message was for us (directed or broadcast). */
        if (!cec_msg_is_broadcast(msg))
@@ -1112,9 +1119,6 @@ static int cec_config_log_addr(struct cec_adapter *adap,
        las->log_addr[idx] = log_addr;
        las->log_addr_mask |= 1 << log_addr;
        adap->phys_addrs[log_addr] = adap->phys_addr;
-
-       dprintk(2, "claimed addr %d (%d)\n", log_addr,
-               las->primary_device_type[idx]);
        return 1;
 }

@@ -1300,7 +1304,7 @@ static int cec_config_thread_func(void *arg)
                /* Report Physical Address */
                cec_msg_report_physical_addr(&msg, adap->phys_addr,
                                             las->primary_device_type[i]);
-               dprintk(2, "config: la %d pa %x.%x.%x.%x\n",
+               dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
                        las->log_addr[i],
                        cec_phys_addr_exp(adap->phys_addr));
                cec_transmit_msg_fh(adap, &msg, NULL, false);
@@ -1534,12 +1538,12 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
                if (log_addrs->num_log_addrs == 2) {
                        if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) 
|
                                           (1 << CEC_LOG_ADDR_TYPE_TV)))) {
-                               dprintk(1, "Two LAs is only allowed for 
audiosystem and TV\n");
+                               dprintk(1, "two LAs is only allowed for 
audiosystem and TV\n");
                                return -EINVAL;
                        }
                        if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
                                           (1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
-                               dprintk(1, "An audiosystem/TV can only be 
combined with record or playback\n");
+                               dprintk(1, "an audiosystem/TV can only be 
combined with record or playback\n");
                                return -EINVAL;
                        }
                }
@@ -1653,7 +1657,7 @@ static int cec_receive_notify(struct cec_adapter *adap, 
struct cec_msg *msg,
        bool from_unregistered = init_laddr == 0xf;
        struct cec_msg tx_cec_msg = { };

-       dprintk(1, "cec_receive_notify: %*ph\n", msg->len, msg->msg);
+       dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);

        /* If this is a CDC-Only device, then ignore any non-CDC messages */
        if (cec_is_cdc_only(&adap->log_addrs) &&
@@ -1722,7 +1726,7 @@ static int cec_receive_notify(struct cec_adapter *adap, 
struct cec_msg *msg,

                if (!from_unregistered)
                        adap->phys_addrs[init_laddr] = pa;
-               dprintk(1, "Reported physical address %x.%x.%x.%x for logical 
address %d\n",
+               dprintk(1, "reported physical address %x.%x.%x.%x for logical 
address %d\n",
                        cec_phys_addr_exp(pa), init_laddr);
                break;
        }
-- 
2.11.0

Reply via email to