This patch adds CIO2 CSI-2 device driver for Intel's IPU3 camera sub-system support.
Signed-off-by: Yong Zhi <yong....@intel.com> Signed-off-by: Hyungwoo Yang <hyungwoo.y...@intel.com> Signed-off-by: Ramya Vijaykumar <ramya.vijayku...@intel.com> --- drivers/media/pci/Kconfig | 2 + drivers/media/pci/Makefile | 3 +- drivers/media/pci/intel/Makefile | 5 + drivers/media/pci/intel/ipu3/Kconfig | 17 + drivers/media/pci/intel/ipu3/Makefile | 1 + drivers/media/pci/intel/ipu3/ipu3-cio2.c | 1873 ++++++++++++++++++++++++++++++ drivers/media/pci/intel/ipu3/ipu3-cio2.h | 442 +++++++ 7 files changed, 2342 insertions(+), 1 deletion(-) create mode 100644 drivers/media/pci/intel/Makefile create mode 100644 drivers/media/pci/intel/ipu3/Kconfig create mode 100644 drivers/media/pci/intel/ipu3/Makefile create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.c create mode 100644 drivers/media/pci/intel/ipu3/ipu3-cio2.h diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig index da28e68..5932e22 100644 --- a/drivers/media/pci/Kconfig +++ b/drivers/media/pci/Kconfig @@ -54,5 +54,7 @@ source "drivers/media/pci/smipcie/Kconfig" source "drivers/media/pci/netup_unidvb/Kconfig" endif +source "drivers/media/pci/intel/ipu3/Kconfig" + endif #MEDIA_PCI_SUPPORT endif #PCI diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile index a7e8af0..d8f9843 100644 --- a/drivers/media/pci/Makefile +++ b/drivers/media/pci/Makefile @@ -13,7 +13,8 @@ obj-y += ttpci/ \ ddbridge/ \ saa7146/ \ smipcie/ \ - netup_unidvb/ + netup_unidvb/ \ + intel/ obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_ZORAN) += zoran/ diff --git a/drivers/media/pci/intel/Makefile b/drivers/media/pci/intel/Makefile new file mode 100644 index 0000000..745c8b2 --- /dev/null +++ b/drivers/media/pci/intel/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the IPU3 cio2 and ImGU drivers +# + +obj-y += ipu3/ diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig new file mode 100644 index 0000000..2a895d6 --- /dev/null +++ b/drivers/media/pci/intel/ipu3/Kconfig @@ -0,0 +1,17 @@ +config VIDEO_IPU3_CIO2 + tristate "Intel ipu3-cio2 driver" + depends on VIDEO_V4L2 && PCI + depends on MEDIA_CONTROLLER + depends on HAS_DMA + depends on ACPI + select V4L2_FWNODE + select VIDEOBUF2_DMA_SG + + ---help--- + This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel + Skylake and Kaby Lake SoCs and used for capturing images and + video from a camera sensor. + + Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2 + connected camera. + The module will be called ipu3-cio2. diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile new file mode 100644 index 0000000..20186e3 --- /dev/null +++ b/drivers/media/pci/intel/ipu3/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c new file mode 100644 index 0000000..8ecb17f --- /dev/null +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -0,0 +1,1873 @@ +/* + * Copyright (c) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Based partially on Intel IPU4 driver written by + * Sakari Ailus <sakari.ai...@linux.intel.com> + * Samu Onkalo <samu.onk...@intel.com> + * Jouni Högander <jouni.hogan...@intel.com> + * Jouni Ukkonen <jouni.ukko...@intel.com> + * Antti Laakso <antti.laa...@intel.com> + * et al. + * + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/vmalloc.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-sg.h> + +#include "ipu3-cio2.h" + +/* + * These are raw formats used in Intel's third generation of + * Image Processing Unit known as IPU3. + * 10bit raw bayer packed, 32 bytes for every 25 pixels, + * last LSB 6 bits unused. + */ +static const u32 cio2_csi2_fmts[] = { + V4L2_PIX_FMT_IPU3_SRGGB10, + V4L2_PIX_FMT_IPU3_SGBRG10, + V4L2_PIX_FMT_IPU3_SGRBG10, + V4L2_PIX_FMT_IPU3_SBGGR10, +}; + +static inline u32 cio2_bytesperline(const unsigned int width) +{ + /* + * 64 bytes for every 50 pixels, the line length + * in bytes is multiple of 64 (line end alignment). + */ + return DIV_ROUND_UP(width, 50) * 64; +} + +/**************** FBPT operations ****************/ + +static void cio2_fbpt_exit_dummy(struct cio2_device *cio2) +{ + if (cio2->dummy_lop) { + dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE, + cio2->dummy_lop, cio2->dummy_lop_bus_addr); + cio2->dummy_lop = NULL; + } + if (cio2->dummy_page) { + dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE, + cio2->dummy_page, cio2->dummy_page_bus_addr); + cio2->dummy_page = NULL; + } +} + +static int cio2_fbpt_init_dummy(struct cio2_device *cio2) +{ + unsigned int i; + + cio2->dummy_page = dma_alloc_coherent(&cio2->pci_dev->dev, + CIO2_PAGE_SIZE, &cio2->dummy_page_bus_addr, + GFP_KERNEL); + cio2->dummy_lop = dma_alloc_coherent(&cio2->pci_dev->dev, + CIO2_PAGE_SIZE, &cio2->dummy_lop_bus_addr, + GFP_KERNEL); + if (!cio2->dummy_page || !cio2->dummy_lop) { + cio2_fbpt_exit_dummy(cio2); + return -ENOMEM; + } + /* + * List of Pointers(LOP) contains 1024x32b pointers to 4KB page each + * Initialize each entry to dummy_page bus base address. + */ + for (i = 0; i < CIO2_PAGE_SIZE / sizeof(*cio2->dummy_lop); i++) + cio2->dummy_lop[i] = cio2->dummy_page_bus_addr >> PAGE_SHIFT; + + return 0; +} + +static void cio2_fbpt_entry_enable(struct cio2_device *cio2, + struct cio2_fbpt_entry entry[CIO2_MAX_LOPS]) +{ + /* + * The CPU first initializes some fields in fbpt, then sets + * the VALID bit, this barrier is to ensure that the DMA(device) + * does not see the VALID bit enabled before other fields are + * initialized; otherwise it could lead to havoc. + */ + dma_wmb(); + + /* + * Request interrupts for start and completion + * Valid bit is applicable only to 1st entry + */ + entry[0].first_entry.ctrl = CIO2_FBPT_CTRL_VALID | + CIO2_FBPT_CTRL_IOC | CIO2_FBPT_CTRL_IOS; +} + +/* Initialize fpbt entries to point to dummy frame */ +static void cio2_fbpt_entry_init_dummy(struct cio2_device *cio2, + struct cio2_fbpt_entry + entry[CIO2_MAX_LOPS]) +{ + unsigned int i; + + entry[0].first_entry.first_page_offset = 0; + entry[1].second_entry.num_of_pages = + CIO2_PAGE_SIZE / sizeof(u32) * CIO2_MAX_LOPS; + entry[1].second_entry.last_page_available_bytes = CIO2_PAGE_SIZE - 1; + + for (i = 0; i < CIO2_MAX_LOPS; i++) + entry[i].lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT; + + cio2_fbpt_entry_enable(cio2, entry); +} + +/* Initialize fpbt entries to point to a given buffer */ +static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2, + struct cio2_buffer *b, + struct cio2_fbpt_entry + entry[CIO2_MAX_LOPS]) +{ + struct vb2_buffer *vb = &b->vbb.vb2_buf; + unsigned int length = vb->planes[0].length; + int remaining, i; + + entry[0].first_entry.first_page_offset = + offset_in_page(vb2_plane_vaddr(vb, 0)); + remaining = length + entry[0].first_entry.first_page_offset; + entry[1].second_entry.num_of_pages = + DIV_ROUND_UP(remaining, CIO2_PAGE_SIZE); + /* + * last_page_available_bytes has the offset of the last byte in the + * last page which is still accessible by DMA. DMA cannot access + * beyond this point. Valid range for this is from 0 to 4095. + * 0 indicates 1st byte in the page is DMA accessible. + * 4095 (CIO2_PAGE_SIZE - 1) means every single byte in the last page + * is available for DMA transfer. + */ + entry[1].second_entry.last_page_available_bytes = + (remaining & ~PAGE_MASK) ? + (remaining & ~PAGE_MASK) - 1 : + CIO2_PAGE_SIZE - 1; + /* Fill FBPT */ + remaining = length; + i = 0; + while (remaining > 0) { + entry->lop_page_addr = b->lop_bus_addr[i] >> PAGE_SHIFT; + remaining -= CIO2_PAGE_SIZE / sizeof(u32) * CIO2_PAGE_SIZE; + entry++; + i++; + } + + /* + * The first not meaningful FBPT entry should point to a valid LOP + */ + entry->lop_page_addr = cio2->dummy_lop_bus_addr >> PAGE_SHIFT; + + cio2_fbpt_entry_enable(cio2, entry); +} + +static int cio2_fbpt_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + struct device *dev = &cio2->pci_dev->dev; + + q->fbpt = dma_alloc_coherent(dev, CIO2_FBPT_SIZE, + &q->fbpt_bus_addr, GFP_KERNEL); + if (!q->fbpt) + return -ENOMEM; + + memset(q->fbpt, 0, CIO2_FBPT_SIZE); + + return 0; +} + +static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev) +{ + dma_free_coherent(dev, CIO2_FBPT_SIZE, q->fbpt, q->fbpt_bus_addr); +} + +/**************** CSI2 hardware setup ****************/ + +/* + * The CSI2 receiver has several parameters affecting + * the receiver timings. These depend on the MIPI bus frequency + * F in Hz (sensor transmitter rate) as follows: + * register value = (A/1e9 + B * UI) / COUNT_ACC + * where + * UI = 1 / (2 * F) in seconds + * COUNT_ACC = counter accuracy in seconds + * For IPU3 COUNT_ACC = 0.0625 + * + * A and B are coefficients from the table below, + * depending whether the register minimum or maximum value is + * calculated. + * Minimum Maximum + * Clock lane A B A B + * reg_rx_csi_dly_cnt_termen_clane 0 0 38 0 + * reg_rx_csi_dly_cnt_settle_clane 95 -8 300 -16 + * Data lanes + * reg_rx_csi_dly_cnt_termen_dlane0 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane0 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane1 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane1 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane2 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane2 85 -2 145 -6 + * reg_rx_csi_dly_cnt_termen_dlane3 0 0 35 4 + * reg_rx_csi_dly_cnt_settle_dlane3 85 -2 145 -6 + * + * We use the minimum values of both A and B. + */ + +/* + * shift for keeping value range suitable for 32-bit integer arithmetics + */ +#define LIMIT_SHIFT 8 + +static int cio2_rx_timing(s32 a, s32 b, s64 freq, int def) +{ + const u32 accinv = 16; /* invert of counter resolution */ + const u32 uiinv = 500000000; /* 1/2 * 1/1e9 */ + int r; + + freq >>= LIMIT_SHIFT; + + if (WARN_ON(freq <= 0 || freq > S32_MAX)) + return def; + /* + * b could be 0, -2 or -8, so |accinv * b| is always + * less than (1 << ds) and thus |r| < 500000000. + */ + r = accinv * b * (uiinv >> LIMIT_SHIFT); + r = (s32) r / freq; + /* max value of a is 95 */ + r += accinv * a; + + return r; +}; + +/* Calculate the the delay value for termination enable of clock lane HS Rx */ +static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q, + struct cio2_csi2_timing *timing) +{ + struct device *dev = &cio2->pci_dev->dev; + struct v4l2_querymenu qm = {.id = V4L2_CID_LINK_FREQ, }; + struct v4l2_ctrl *link_freq; + s64 freq; + int r; + + if (!q->sensor) + return -ENODEV; + + link_freq = v4l2_ctrl_find(q->sensor->ctrl_handler, + V4L2_CID_LINK_FREQ); + if (!link_freq) { + dev_err(dev, "failed to find LINK_FREQ\n"); + return -EPIPE; + }; + + qm.index = v4l2_ctrl_g_ctrl(link_freq); + r = v4l2_querymenu(q->sensor->ctrl_handler, &qm); + if (r) { + dev_err(dev, "failed to get menu item\n"); + return r; + } + + if (!qm.value) { + dev_err(dev, "error invalid link_freq\n"); + return -EINVAL; + } + freq = qm.value; + + timing->clk_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A, + CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B, freq, + CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT); + timing->clk_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A, + CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B, freq, + CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT); + timing->dat_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A, + CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B, freq, + CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT); + timing->dat_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A, + CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B, freq, + CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT); + + dev_dbg(dev, "freq ct value is %d\n", timing->clk_termen); + dev_dbg(dev, "freq cs value is %d\n", timing->clk_settle); + dev_dbg(dev, "freq dt value is %d\n", timing->dat_termen); + dev_dbg(dev, "freq ds value is %d\n", timing->dat_settle); + + return 0; +}; + +static int cio2_hw_mbus_to_mipicode(__u32 code, u8 *mipicode) +{ + static const struct { + u32 mbuscode; + u8 mipicode; + } mbus2mipi[] = { + { MEDIA_BUS_FMT_SBGGR10_1X10, 0x2b }, + { MEDIA_BUS_FMT_SGBRG10_1X10, 0x2b }, + { MEDIA_BUS_FMT_SGRBG10_1X10, 0x2b }, + { MEDIA_BUS_FMT_SRGGB10_1X10, 0x2b }, + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mbus2mipi); i++) + if (mbus2mipi[i].mbuscode == code) { + *mipicode = mbus2mipi[i].mipicode; + return 0; + } + + return -EINVAL; +} + +static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + static const int NUM_VCS = 4; + static const int SID; /* Stream id */ + static const int ENTRY; + static const int FBPT_WIDTH = DIV_ROUND_UP(CIO2_MAX_LOPS, + CIO2_FBPT_SUBENTRY_UNIT); + const u32 num_buffers1 = CIO2_MAX_BUFFERS - 1; + void __iomem *const base = cio2->base; + u8 mipicode, lanes, csi2bus = q->csi2.port; + u8 sensor_vc = SENSOR_VIR_CH_DFLT; + struct cio2_csi2_timing timing; + int i, r; + + r = cio2_hw_mbus_to_mipicode(q->subdev_fmt.code, &mipicode); + if (r < 0) + return r; + + lanes = q->csi2.num_of_lanes; + + r = cio2_csi2_calc_timing(cio2, q, &timing); + if (r) + return r; + + writel(timing.clk_termen, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_TERMEN(CIO2_CSIRX_DLY_CNT_CLANE_IDX)); + writel(timing.clk_settle, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_SETTLE(CIO2_CSIRX_DLY_CNT_CLANE_IDX)); + + for (i = 0; i < lanes; i++) { + writel(timing.dat_termen, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_TERMEN(i)); + writel(timing.dat_settle, q->csi_rx_base + + CIO2_REG_CSIRX_DLY_CNT_SETTLE(i)); + } + + writel(CIO2_PBM_WMCTRL1_MIN_2CK | + CIO2_PBM_WMCTRL1_MID1_2CK | + CIO2_PBM_WMCTRL1_MID2_2CK, base + CIO2_REG_PBM_WMCTRL1); + writel(CIO2_PBM_WMCTRL2_HWM_2CK << CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_LWM_2CK << CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_OBFFWM_2CK << + CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT | + CIO2_PBM_WMCTRL2_TRANSDYN << CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT | + CIO2_PBM_WMCTRL2_OBFF_MEM_EN, base + CIO2_REG_PBM_WMCTRL2); + writel(CIO2_PBM_ARB_CTRL_LANES_DIV << + CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT | + CIO2_PBM_ARB_CTRL_LE_EN | + CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN << + CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT | + CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP << + CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT, + base + CIO2_REG_PBM_ARB_CTRL); + writel(CIO2_CSIRX_STATUS_DLANE_HS_MASK, + q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_HS); + writel(CIO2_CSIRX_STATUS_DLANE_LP_MASK, + q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_LP); + + writel(CIO2_FB_HPLL_FREQ, base + CIO2_REG_FB_HPLL_FREQ); + writel(CIO2_ISCLK_RATIO, base + CIO2_REG_ISCLK_RATIO); + + /* Configure MIPI backend */ + for (i = 0; i < NUM_VCS; i++) + writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_SP_LUT_ENTRY(i)); + + /* There are 16 short packet LUT entry */ + for (i = 0; i < 16; i++) + writel(CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD, + q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(i)); + writel(CIO2_MIPIBE_GLOBAL_LUT_DISREGARD, + q->csi_rx_base + CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD); + + writel(CIO2_INT_EN_EXT_IE_MASK, base + CIO2_REG_INT_EN_EXT_IE); + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK); + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE); + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_EDGE); + writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE); + writel(CIO2_INT_EN_EXT_OE_MASK, base + CIO2_REG_INT_EN_EXT_OE); + + writel(CIO2_REG_INT_EN_IRQ | CIO2_INT_IOC(CIO2_DMA_CHAN) | + CIO2_REG_INT_EN_IOS(CIO2_DMA_CHAN), + base + CIO2_REG_INT_EN); + + writel((CIO2_PXM_PXF_FMT_CFG_BPP_10 | CIO2_PXM_PXF_FMT_CFG_PCK_64B) + << CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT, + base + CIO2_REG_PXM_PXF_FMT_CFG0(csi2bus)); + writel(SID << CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT | + sensor_vc << CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT | + mipicode << CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT, + q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(ENTRY)); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_COMP_FORMAT(sensor_vc)); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_FORCE_RAW8); + writel(0, base + CIO2_REG_PXM_SID2BID0(csi2bus)); + + writel(lanes, q->csi_rx_base + CIO2_REG_CSIRX_NOF_ENABLED_LANES); + writel(CIO2_CGC_PRIM_TGE | + CIO2_CGC_SIDE_TGE | + CIO2_CGC_XOSC_TGE | + CIO2_CGC_D3I3_TGE | + CIO2_CGC_CSI2_INTERFRAME_TGE | + CIO2_CGC_CSI2_PORT_DCGE | + CIO2_CGC_SIDE_DCGE | + CIO2_CGC_PRIM_DCGE | + CIO2_CGC_ROSC_DCGE | + CIO2_CGC_XOSC_DCGE | + CIO2_CGC_CLKGATE_HOLDOFF << CIO2_CGC_CLKGATE_HOLDOFF_SHIFT | + CIO2_CGC_CSI_CLKGATE_HOLDOFF + << CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT, base + CIO2_REG_CGC); + writel(CIO2_LTRVAL0_VAL << CIO2_LTRVAL02_VAL_SHIFT | + CIO2_LTRVAL0_SCALE << CIO2_LTRVAL02_SCALE_SHIFT | + CIO2_LTRVAL1_VAL << CIO2_LTRVAL13_VAL_SHIFT | + CIO2_LTRVAL1_SCALE << CIO2_LTRVAL13_SCALE_SHIFT, + base + CIO2_REG_LTRVAL01); + writel(CIO2_LTRVAL2_VAL << CIO2_LTRVAL02_VAL_SHIFT | + CIO2_LTRVAL2_SCALE << CIO2_LTRVAL02_SCALE_SHIFT | + CIO2_LTRVAL3_VAL << CIO2_LTRVAL13_VAL_SHIFT | + CIO2_LTRVAL3_SCALE << CIO2_LTRVAL13_SCALE_SHIFT, + base + CIO2_REG_LTRVAL23); + + for (i = 0; i < CIO2_NUM_DMA_CHAN; i++) { + writel(0, base + CIO2_REG_CDMABA(i)); + writel(0, base + CIO2_REG_CDMAC0(i)); + writel(0, base + CIO2_REG_CDMAC1(i)); + } + + /* Enable DMA */ + writel(q->fbpt_bus_addr >> PAGE_SHIFT, + base + CIO2_REG_CDMABA(CIO2_DMA_CHAN)); + + writel(num_buffers1 << CIO2_CDMAC0_FBPT_LEN_SHIFT | + FBPT_WIDTH << CIO2_CDMAC0_FBPT_WIDTH_SHIFT | + CIO2_CDMAC0_DMA_INTR_ON_FE | + CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL | + CIO2_CDMAC0_DMA_EN | + CIO2_CDMAC0_DMA_INTR_ON_FS | + CIO2_CDMAC0_DMA_HALTED, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)); + + writel(1 << CIO2_CDMAC1_LINENUMUPDATE_SHIFT, + base + CIO2_REG_CDMAC1(CIO2_DMA_CHAN)); + + writel(0, base + CIO2_REG_PBM_FOPN_ABORT); + + writel(CIO2_PXM_FRF_CFG_CRC_TH << CIO2_PXM_FRF_CFG_CRC_TH_SHIFT | + CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR | + CIO2_PXM_FRF_CFG_MSK_ECC_RE | + CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE, + base + CIO2_REG_PXM_FRF_CFG(q->csi2.port)); + + /* Clear interrupts */ + writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); + writel(~0, base + CIO2_REG_INT_STS_EXT_OE); + writel(~0, base + CIO2_REG_INT_STS_EXT_IE); + writel(~0, base + CIO2_REG_INT_STS); + + /* Enable devices, starting from the last device in the pipe */ + writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE); + writel(1, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE); + + return 0; +} + +static void cio2_hw_exit(struct cio2_device *cio2, struct cio2_queue *q) +{ + void __iomem *base = cio2->base; + unsigned int i, maxloops = 1000; + + /* Disable CSI receiver and MIPI backend devices */ + writel(0, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE); + writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE); + + /* Halt DMA */ + writel(0, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)); + do { + if (readl(base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN)) & + CIO2_CDMAC0_DMA_HALTED) + break; + usleep_range(1000, 2000); + } while (--maxloops); + if (!maxloops) + dev_err(&cio2->pci_dev->dev, + "DMA %i can not be halted\n", CIO2_DMA_CHAN); + + for (i = 0; i < CIO2_NUM_PORTS; i++) { + writel(readl(base + CIO2_REG_PXM_FRF_CFG(i)) | + CIO2_PXM_FRF_CFG_ABORT, base + CIO2_REG_PXM_FRF_CFG(i)); + writel(readl(base + CIO2_REG_PBM_FOPN_ABORT) | + CIO2_PBM_FOPN_ABORT(i), base + CIO2_REG_PBM_FOPN_ABORT); + } +} + +static void cio2_buffer_done(struct cio2_device *cio2, unsigned int dma_chan) +{ + struct device *dev = &cio2->pci_dev->dev; + struct cio2_queue *q = cio2->cur_queue; + int buffers_found = 0; + + if (dma_chan >= CIO2_QUEUES) { + dev_err(dev, "bad DMA channel %i\n", dma_chan); + return; + } + + /* Find out which buffer(s) are ready */ + do { + struct cio2_fbpt_entry *const entry = + &q->fbpt[q->bufs_first * CIO2_MAX_LOPS]; + struct cio2_buffer *b; + u64 ns = ktime_get_ns(); + + if (entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID) + break; + + b = q->bufs[q->bufs_first]; + if (b) { + q->bufs[q->bufs_first] = NULL; + atomic_dec(&q->bufs_queued); + + b->vbb.vb2_buf.timestamp = ns; + b->vbb.field = V4L2_FIELD_NONE; + b->vbb.sequence = entry[0].first_entry.frame_num; + vb2_buffer_done(&b->vbb.vb2_buf, VB2_BUF_STATE_DONE); + } + cio2_fbpt_entry_init_dummy(cio2, entry); + q->bufs_first = (q->bufs_first + 1) % CIO2_MAX_BUFFERS; + buffers_found++; + } while (1); + + if (buffers_found == 0) + dev_warn(&cio2->pci_dev->dev, + "no ready buffers found on DMA channel %u\n", + dma_chan); +} + +static void cio2_queue_event_sof(struct cio2_device *cio2, struct cio2_queue *q) +{ + struct v4l2_event event = { + .type = V4L2_EVENT_FRAME_SYNC, + .u.frame_sync.frame_sequence = + atomic_inc_return(&q->frame_sequence) - 1, + }; + + v4l2_event_queue(q->subdev.devnode, &event); +} + +static const char *const cio2_irq_errs[] = { + "single packet header error corrected", + "multiple packet header errors detected", + "payload checksum (CRC) error", + "fifo overflow", + "reserved short packet data type detected", + "reserved long packet data type detected", + "incomplete long packet detected", + "frame sync error", + "line sync error", + "DPHY start of transmission error", + "DPHY synchronization error", + "escape mode error", + "escape mode trigger event", + "escape mode ultra-low power state for data lane(s)", + "escape mode ultra-low power state exit for clock lane", + "inter-frame short packet discarded", + "inter-frame long packet discarded", + "non-matching Long Packet stalled", +}; + +static const char *const cio2_port_errs[] = { + "ECC recoverable", + "DPHY not recoverable", + "ECC not recoverable", + "CRC error", + "INTERFRAMEDATA", + "PKT2SHORT", + "PKT2LONG", +}; + +static irqreturn_t cio2_irq(int irq, void *cio2_ptr) +{ + struct cio2_device *cio2 = cio2_ptr; + void __iomem *const base = cio2->base; + struct device *dev = &cio2->pci_dev->dev; + u32 int_status, int_clear; + + int_clear = int_status = readl(base + CIO2_REG_INT_STS); + if (!int_status) + return IRQ_NONE; + + if (int_status & CIO2_INT_IOOE) { + /* + * Interrupt on Output Error: + * 1) SRAM is full and FS received, or + * 2) An invalid bit detected by DMA. + */ + u32 oe_status, oe_clear; + + oe_clear = readl(base + CIO2_REG_INT_STS_EXT_OE); + oe_status = oe_clear; + + if (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) { + dev_err(dev, "DMA output error: 0x%x\n", + (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) + >> CIO2_INT_EXT_OE_DMAOE_SHIFT); + oe_status &= ~CIO2_INT_EXT_OE_DMAOE_MASK; + } + if (oe_status & CIO2_INT_EXT_OE_OES_MASK) { + dev_err(dev, "DMA output error on CSI2 buses: 0x%x\n", + (oe_status & CIO2_INT_EXT_OE_OES_MASK) + >> CIO2_INT_EXT_OE_OES_SHIFT); + oe_status &= ~CIO2_INT_EXT_OE_OES_MASK; + } + writel(oe_clear, base + CIO2_REG_INT_STS_EXT_OE); + if (oe_status) + dev_warn(dev, "unknown interrupt 0x%x on OE\n", + oe_status); + int_status &= ~CIO2_INT_IOOE; + } + + if (int_status & CIO2_INT_IOC_MASK) { + /* DMA IO done -- frame ready */ + u32 clr = 0; + unsigned int d; + + for (d = 0; d < CIO2_NUM_DMA_CHAN; d++) + if (int_status & CIO2_INT_IOC(d)) { + clr |= CIO2_INT_IOC(d); + dev_dbg(dev, "DMA %i done\n", d); + cio2_buffer_done(cio2, d); + } + int_status &= ~clr; + } + + if (int_status & CIO2_INT_IOS_IOLN_MASK) { + /* DMA IO starts or reached specified line */ + u32 clr = 0; + unsigned int d; + + for (d = 0; d < CIO2_NUM_DMA_CHAN; d++) + if (int_status & CIO2_INT_IOS_IOLN(d)) { + clr |= CIO2_INT_IOS_IOLN(d); + if (d == CIO2_DMA_CHAN) + cio2_queue_event_sof(cio2, + cio2->cur_queue); + dev_dbg(dev, + "DMA %i started or reached line\n", d); + } + int_status &= ~clr; + } + + if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) { + /* CSI2 receiver (error) interrupt */ + u32 ie_status, ie_clear; + unsigned int port; + + ie_clear = readl(base + CIO2_REG_INT_STS_EXT_IE); + ie_status = ie_clear; + + for (port = 0; port < CIO2_NUM_PORTS; port++) { + u32 port_status = (ie_status >> (port * 8)) & 0xff; + u32 err_mask = BIT_MASK(ARRAY_SIZE(cio2_port_errs)) - 1; + void __iomem *const csi_rx_base = + base + CIO2_REG_PIPE_BASE(port); + unsigned int i; + + while (port_status & err_mask) { + i = ffs(port_status) - 1; + dev_err(dev, "port %i error %s\n", + port, cio2_port_errs[i]); + ie_status &= ~BIT(port * 8 + i); + port_status &= ~BIT(i); + } + + if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) { + u32 csi2_status, csi2_clear; + + csi2_status = readl(csi_rx_base + + CIO2_REG_IRQCTRL_STATUS); + csi2_clear = csi2_status; + err_mask = + BIT_MASK(ARRAY_SIZE(cio2_irq_errs)) - 1; + + while (csi2_status & err_mask) { + i = ffs(csi2_status) - 1; + dev_err(dev, + "CSI-2 receiver port %i: %s\n", + port, cio2_irq_errs[i]); + csi2_status &= ~BIT(i); + } + + writel(csi2_clear, + csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); + if (csi2_status) + dev_warn(dev, + "unknown CSI2 error 0x%x on port %i\n", + csi2_status, port); + + ie_status &= ~CIO2_INT_EXT_IE_IRQ(port); + } + } + + writel(ie_clear, base + CIO2_REG_INT_STS_EXT_IE); + if (ie_status) + dev_warn(dev, "unknown interrupt 0x%x on IE\n", + ie_status); + + int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ); + } + + writel(int_clear, base + CIO2_REG_INT_STS); + if (int_status) + dev_warn(dev, "unknown interrupt 0x%x on INT\n", int_status); + + return IRQ_HANDLED; +} + +/**************** Videobuf2 interface ****************/ + +static void cio2_vb2_return_all_buffers(struct cio2_queue *q) +{ + unsigned int i; + + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + if (q->bufs[i]) { + atomic_dec(&q->bufs_queued); + vb2_buffer_done(&q->bufs[i]->vbb.vb2_buf, + VB2_BUF_STATE_ERROR); + } + } +} + +static int cio2_vb2_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, + unsigned int *num_planes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + u32 width = q->subdev_fmt.width; + u32 height = q->subdev_fmt.height; + u32 pixelformat = q->format.pixelformat; + unsigned int i, szimage; + int r = 0; + + for (i = 0; i < ARRAY_SIZE(cio2_csi2_fmts); i++) { + if (pixelformat == cio2_csi2_fmts[i]) + break; + } + + alloc_devs[0] = &cio2->pci_dev->dev; + szimage = cio2_bytesperline(width) * height; + + *num_planes = 1; + sizes[0] = szimage; + + *num_buffers = clamp_val(*num_buffers, 1, CIO2_MAX_BUFFERS); + + /* Initialize buffer queue */ + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + q->bufs[i] = NULL; + cio2_fbpt_entry_init_dummy(cio2, &q->fbpt[i * CIO2_MAX_LOPS]); + } + atomic_set(&q->bufs_queued, 0); + q->bufs_first = 0; + q->bufs_next = 0; + q->format.sizeimage = szimage; + + return r; +} + +/* Called after each buffer is allocated */ +static int cio2_vb2_buf_init(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct device *dev = &cio2->pci_dev->dev; + struct cio2_buffer *b = + container_of(vb, struct cio2_buffer, vbb.vb2_buf); + unsigned int length = vb->planes[0].length; + unsigned int page_entry = CIO2_PAGE_SIZE / sizeof(u32); + int lops = DIV_ROUND_UP(DIV_ROUND_UP(length, CIO2_PAGE_SIZE) + 1, + page_entry); + struct sg_table *sg; + struct sg_page_iter sg_iter; + unsigned int i, j; + + if (lops <= 0 || lops > CIO2_MAX_LOPS) { + dev_err(dev, "%s: bad buffer size (%i)\n", __func__, length); + return -ENOSPC; /* Should never happen */ + } + + /* Allocate LOP table */ + for (i = 0; i < lops; i++) { + b->lop[i] = dma_alloc_coherent(dev, CIO2_PAGE_SIZE, + &b->lop_bus_addr[i], GFP_KERNEL); + if (!b->lop[i]) + goto fail; + } + + /* Fill LOP */ + sg = vb2_dma_sg_plane_desc(vb, 0); + if (!sg) + return -ENOMEM; + + i = j = 0; + for_each_sg_page(sg->sgl, &sg_iter, sg->nents, 0) { + b->lop[i][j] = sg_page_iter_dma_address(&sg_iter) >> PAGE_SHIFT; + j++; + if (j == page_entry) { + i++; + j = 0; + } + } + + b->lop[i][j] = cio2->dummy_page_bus_addr >> PAGE_SHIFT; + return 0; +fail: + for (; i >= 0; i--) + dma_free_coherent(dev, CIO2_PAGE_SIZE, + b->lop[i], b->lop_bus_addr[i]); + return -ENOMEM; +} + +/* Transfer buffer ownership to cio2 */ +static void cio2_vb2_buf_queue(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct cio2_queue *q = + container_of(vb->vb2_queue, struct cio2_queue, vbq); + struct cio2_buffer *b = + container_of(vb, struct cio2_buffer, vbb.vb2_buf); + struct cio2_fbpt_entry *entry; + unsigned int i, next = q->bufs_next; + int bufs_queued = atomic_inc_return(&q->bufs_queued); + + if (vb2_is_streaming(&q->vbq)) { + u32 fbpt_rp = + (readl(cio2->base + CIO2_REG_CDMARI(CIO2_DMA_CHAN)) + >> CIO2_CDMARI_FBPT_RP_SHIFT) + & CIO2_CDMARI_FBPT_RP_MASK; + + /* + * fbpt_rp is the fbpt entry that the dma is currently working + * on, but since it could jump to next entry at any time, + * assume that we might already be there. + */ + fbpt_rp = (fbpt_rp + 1) % CIO2_MAX_BUFFERS; + + if (bufs_queued <= 1) + next = fbpt_rp + 1; /* Buffers were drained */ + else if (fbpt_rp == next) + next++; + next %= CIO2_MAX_BUFFERS; + } + + for (i = 0; i < CIO2_MAX_BUFFERS; i++) { + /* + * We have allocated CIO2_MAX_BUFFERS circularly for the + * hw, the user has requested N buffer queue. The driver + * ensures N <= CIO2_MAX_BUFFERS and guarantees that whenever + * user queues a buffer, there necessarily is a free buffer. + */ + if (!q->bufs[next]) + break; + + dev_dbg(&cio2->pci_dev->dev, + "entry %i was already full!\n", next); + next = (next + 1) % CIO2_MAX_BUFFERS; + } + /* This should not happen, just in case */ + if (i == CIO2_MAX_BUFFERS) { + dev_err(&cio2->pci_dev->dev, + "error: all cio2 entries were full!\n"); + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + return; + } + + q->bufs[next] = b; + entry = &q->fbpt[next * CIO2_MAX_LOPS]; + cio2_fbpt_entry_init_buf(cio2, b, entry); + q->bufs_next = (next + 1) % CIO2_MAX_BUFFERS; + + vb2_set_plane_payload(vb, 0, q->format.sizeimage); +} + +/* Called when each buffer is freed */ +static void cio2_vb2_buf_cleanup(struct vb2_buffer *vb) +{ + struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue); + struct cio2_buffer *b = + container_of(vb, struct cio2_buffer, vbb.vb2_buf); + unsigned int i, length = vb->planes[0].length; + unsigned int lops = DIV_ROUND_UP(DIV_ROUND_UP(length, CIO2_PAGE_SIZE), + CIO2_PAGE_SIZE / sizeof(u32)); + + /* Free LOP table */ + for (i = 0; i < lops; i++) + dma_free_coherent(&cio2->pci_dev->dev, CIO2_PAGE_SIZE, + b->lop[i], b->lop_bus_addr[i]); +} + +static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + int r; + + cio2->cur_queue = q; + atomic_set(&q->frame_sequence, 0); + + r = pm_runtime_get_sync(&cio2->pci_dev->dev); + if (r < 0) { + dev_info(&cio2->pci_dev->dev, + "failed to set power %d\n", r); + pm_runtime_put(&cio2->pci_dev->dev); + return r; + } + + r = media_pipeline_start(&q->vdev.entity, &q->pipe); + if (r) + goto fail_pipeline; + + r = cio2_hw_init(cio2, q); + if (r) + goto fail_hw; + + /* Start streaming on CSI2 receiver */ + r = v4l2_subdev_call(&q->subdev, video, s_stream, 1); + if (r && r != -ENOIOCTLCMD) + goto fail_csi2_subdev; + + /* Start streaming on sensor */ + r = v4l2_subdev_call(q->sensor, video, s_stream, 1); + if (r) + goto fail_sensor_subdev; + + return 0; + +fail_sensor_subdev: + v4l2_subdev_call(&q->subdev, video, s_stream, 0); +fail_csi2_subdev: + cio2_hw_exit(cio2, q); +fail_hw: + media_pipeline_stop(&q->vdev.entity); +fail_pipeline: + dev_dbg(&cio2->pci_dev->dev, "failed to start streaming (%d)\n", r); + cio2_vb2_return_all_buffers(q); + + return r; +} + +static void cio2_vb2_stop_streaming(struct vb2_queue *vq) +{ + struct cio2_queue *q = vb2q_to_cio2_queue(vq); + struct cio2_device *cio2 = vb2_get_drv_priv(vq); + int r; + + if (v4l2_subdev_call(q->sensor, video, s_stream, 0)) + dev_err(&cio2->pci_dev->dev, + "failed to stop sensor streaming\n"); + + r = v4l2_subdev_call(&q->subdev, video, s_stream, 0); + if (r && r != -ENOIOCTLCMD) + dev_err(&cio2->pci_dev->dev, "failed to stop CSI2 streaming\n"); + + cio2_hw_exit(cio2, q); + cio2_vb2_return_all_buffers(q); + media_pipeline_stop(&q->vdev.entity); + pm_runtime_put(&cio2->pci_dev->dev); +} + +static const struct vb2_ops cio2_vb2_ops = { + .buf_init = cio2_vb2_buf_init, + .buf_queue = cio2_vb2_buf_queue, + .buf_cleanup = cio2_vb2_buf_cleanup, + .queue_setup = cio2_vb2_queue_setup, + .start_streaming = cio2_vb2_start_streaming, + .stop_streaming = cio2_vb2_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/**************** V4L2 interface ****************/ + +static int cio2_v4l2_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct cio2_device *cio2 = video_drvdata(file); + struct cio2_queue *q = file_to_cio2_queue(file); + + strlcpy(cap->driver, CIO2_NAME, sizeof(cap->driver)); + strlcpy(cap->card, CIO2_DEVICE_NAME, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "PCI:%s", pci_name(cio2->pci_dev)); + cap->capabilities = q->vdev.device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int cio2_v4l2_enum_fmt(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + if (f->index >= ARRAY_SIZE(cio2_csi2_fmts)) + return -EINVAL; + + f->pixelformat = cio2_csi2_fmts[f->index]; + + return 0; +} + +/* Propagate forward always the format from the CIO2 subdev */ +static int cio2_v4l2_g_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + struct cio2_queue *q = file_to_cio2_queue(file); + + f->fmt.pix.width = q->subdev_fmt.width; + f->fmt.pix.height = q->subdev_fmt.height; + f->fmt.pix.pixelformat = q->format.pixelformat; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.bytesperline = cio2_bytesperline(f->fmt.pix.width); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height; + f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW; + + return 0; +} + +static int cio2_v4l2_try_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + u32 pixelformat = f->fmt.pix.pixelformat; + unsigned int i; + + cio2_v4l2_g_fmt(file, fh, f); + + for (i = 0; i < ARRAY_SIZE(cio2_csi2_fmts); i++) { + if (pixelformat == cio2_csi2_fmts[i]) + break; + } + + /* Use SRGGB10 as default if not found */ + if (i >= ARRAY_SIZE(cio2_csi2_fmts)) + pixelformat = V4L2_PIX_FMT_IPU3_SRGGB10; + + f->fmt.pix.pixelformat = pixelformat; + f->fmt.pix.bytesperline = cio2_bytesperline(f->fmt.pix.width); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height; + + return 0; +} + +static int cio2_v4l2_s_fmt(struct file *file, void *fh, struct v4l2_format *f) +{ + struct cio2_queue *q = file_to_cio2_queue(file); + + cio2_v4l2_try_fmt(file, fh, f); + q->format = f->fmt.pix; + + return 0; +} + +static const struct v4l2_file_operations cio2_v4l2_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +static const struct v4l2_ioctl_ops cio2_v4l2_ioctl_ops = { + .vidioc_querycap = cio2_v4l2_querycap, + .vidioc_enum_fmt_vid_cap = cio2_v4l2_enum_fmt, + .vidioc_g_fmt_vid_cap = cio2_v4l2_g_fmt, + .vidioc_s_fmt_vid_cap = cio2_v4l2_s_fmt, + .vidioc_try_fmt_vid_cap = cio2_v4l2_try_fmt, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, +}; + +static int cio2_subdev_subscribe_event(struct v4l2_subdev *sd, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type != V4L2_EVENT_FRAME_SYNC) + return -EINVAL; + + /* Line number. For now only zero accepted. */ + if (sub->id != 0) + return -EINVAL; + + return v4l2_event_subscribe(fh, sub, 0, NULL); +} + +/* + * cio2_subdev_get_fmt - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @cfg: V4L2 subdev pad config + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int cio2_subdev_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) + fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad); + else /* Retrieve the current format */ + fmt->format = q->subdev_fmt; + + return 0; +} + +/* + * cio2_subdev_set_fmt - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @cfg: V4L2 subdev pad config + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int cio2_subdev_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev); + + /* + * Only allow setting sink pad format; + * source always propagates from sink + */ + if (fmt->pad == CIO2_PAD_SOURCE) + return cio2_subdev_get_fmt(sd, cfg, fmt); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format; + } else { + /* It's the sink, allow changing frame size */ + q->subdev_fmt.width = fmt->format.width; + q->subdev_fmt.height = fmt->format.height; + q->subdev_fmt.code = fmt->format.code; + fmt->format = q->subdev_fmt; + } + + return 0; +} + +static int cio2_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const u32 codes[] = { + MEDIA_BUS_FMT_SRGGB10_1X10, + MEDIA_BUS_FMT_SBGGR10_1X10, + MEDIA_BUS_FMT_SGBRG10_1X10, + MEDIA_BUS_FMT_SGRBG10_1X10, + }; + + if (code->index >= ARRAY_SIZE(codes)) + return -EINVAL; + + code->code = codes[code->index]; + + return 0; +} + +static int cio2_link_validate_get_format(struct media_pad *pad, + struct v4l2_subdev_format *fmt) +{ + if (pad->entity->obj_type == MEDIA_ENTITY_TYPE_V4L2_SUBDEV) { + struct v4l2_subdev *sd = + media_entity_to_v4l2_subdev(pad->entity); + if (sd) { + fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE; + fmt->pad = pad->index; + return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt); + } + } + + return -EINVAL; +} + +static int cio2_video_link_validate(struct media_link *link) +{ + struct video_device *vd; + struct cio2_queue *q; + struct media_pad *pad; + struct v4l2_subdev_format fmt = { 0 }; + struct cio2_device *cio2; + int i, rval; + + static const struct { + u32 mbuscode; + u32 pixfmt; + } mbus2pixfmt[] = { + { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_IPU3_SBGGR10 }, + { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_IPU3_SGBRG10 }, + { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_IPU3_SGRBG10 }, + { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_IPU3_SRGGB10 }, + }; + + vd = container_of(link->sink->entity, struct video_device, entity); + q = container_of(vd, struct cio2_queue, vdev); + cio2 = video_get_drvdata(vd); + pad = media_entity_remote_pad(link->sink->entity->pads); + if (!pad) { + dev_info(&cio2->pci_dev->dev, + "video node %s pad not connected\n", vd->name); + return -ENOTCONN; + } + + rval = cio2_link_validate_get_format(link->source, &fmt); + if (rval) + return rval; + + if (fmt.format.width != q->format.width || + fmt.format.height != q->format.height) { + dev_info(&cio2->pci_dev->dev, + "Wrong width or height %ux%u (%ux%u expected)\n", + q->format.width, q->format.height, + fmt.format.width, fmt.format.height); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(mbus2pixfmt); i++) { + if (mbus2pixfmt[i].mbuscode == fmt.format.code && + mbus2pixfmt[i].pixfmt == q->format.pixelformat) { + return 0; + } + } + + return -EINVAL; +} + +static const struct v4l2_subdev_core_ops cio2_subdev_core_ops = { + .subscribe_event = cio2_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops cio2_subdev_video_ops = {}; + +static const struct v4l2_subdev_pad_ops cio2_subdev_pad_ops = { + .link_validate = v4l2_subdev_link_validate_default, + .get_fmt = cio2_subdev_get_fmt, + .set_fmt = cio2_subdev_set_fmt, + .enum_mbus_code = cio2_subdev_enum_mbus_code, +}; + +static const struct v4l2_subdev_ops cio2_subdev_ops = { + .core = &cio2_subdev_core_ops, + .video = &cio2_subdev_video_ops, + .pad = &cio2_subdev_pad_ops, +}; + +/******* V4L2 sub-device asynchronous registration callbacks***********/ + +struct sensor_async_subdev { + struct v4l2_async_subdev asd; + struct v4l2_fwnode_endpoint vfwn_endpt; +}; + +static struct cio2_queue *cio2_find_queue_by_sensor_node(struct cio2_queue *q, + struct fwnode_handle *fwnode) +{ + int i; + + for (i = 0; i < CIO2_QUEUES; i++) { + if (q[i].sensor->fwnode == fwnode) + return &q[i]; + } + + return NULL; +} + +/* The .bound() notifier callback when a match is found */ +static int cio2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct cio2_device *cio2 = container_of(notifier, + struct cio2_device, notifier); + struct sensor_async_subdev *s_asd = container_of(asd, + struct sensor_async_subdev, asd); + struct cio2_queue *q; + struct device *dev; + int i; + + dev = &cio2->pci_dev->dev; + + /* Find first free slot for the subdev */ + for (i = 0; i < CIO2_QUEUES; i++) + if (!cio2->queue[i].sensor) + break; + + if (i >= CIO2_QUEUES) { + dev_err(dev, "too many subdevs\n"); + return -ENOSPC; + } + q = &cio2->queue[i]; + + q->csi2.port = s_asd->vfwn_endpt.base.port; + q->csi2.num_of_lanes = s_asd->vfwn_endpt.bus.mipi_csi2.num_data_lanes; + q->sensor = sd; + q->csi_rx_base = cio2->base + CIO2_REG_PIPE_BASE(q->csi2.port); + + return 0; +} + +/* The .unbind callback */ +static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct cio2_device *cio2 = container_of(notifier, + struct cio2_device, notifier); + unsigned int i; + + /* Note: sd may here point to unallocated memory. Do not access. */ + for (i = 0; i < CIO2_QUEUES; i++) { + if (cio2->queue[i].sensor == sd) { + cio2->queue[i].sensor = NULL; + return; + } + } +} + +/* .complete() is called after all subdevices have been located */ +static int cio2_notifier_complete(struct v4l2_async_notifier *notifier) +{ + struct cio2_device *cio2 = container_of(notifier, struct cio2_device, + notifier); + struct sensor_async_subdev *s_asd; + struct fwnode_handle *fwn_remote, *fwn_endpt, *fwn_remote_endpt; + struct cio2_queue *q; + struct fwnode_endpoint remote_endpt; + unsigned int i, pad; + int ret; + + for (i = 0; i < notifier->num_subdevs; i++) { + s_asd = container_of(cio2->notifier.subdevs[i], + struct sensor_async_subdev, + asd); + + fwn_remote = s_asd->asd.match.fwnode.fwnode; + fwn_endpt = (struct fwnode_handle *) + s_asd->vfwn_endpt.base.local_fwnode; + fwn_remote_endpt = fwnode_graph_get_remote_endpoint(fwn_endpt); + if (!fwn_remote_endpt) { + dev_err(&cio2->pci_dev->dev, + "failed to get remote endpt\n"); + return ret; + } + + ret = fwnode_graph_parse_endpoint(fwn_remote_endpt, + &remote_endpt); + if (ret) { + dev_err(&cio2->pci_dev->dev, + "failed to parse remote endpt %d\n", ret); + return ret; + } + + q = cio2_find_queue_by_sensor_node(cio2->queue, fwn_remote); + if (!q) { + dev_err(&cio2->pci_dev->dev, + "failed to find cio2 queue %d\n", ret); + return -ENXIO; + } + + for (pad = 0; pad < q->sensor->entity.num_pads; pad++) + if (q->sensor->entity.pads[pad].flags & + MEDIA_PAD_FL_SOURCE) + break; + + if (pad == q->sensor->entity.num_pads) { + dev_err(&cio2->pci_dev->dev, + "failed to src pad for %s\n", q->sensor->name); + return -ENXIO; + } + + ret = media_create_pad_link( + &q->sensor->entity, pad, + &q->subdev.entity, s_asd->vfwn_endpt.base.id, + 0); + if (ret) { + dev_err(&cio2->pci_dev->dev, + "failed to create link for %s\n", + cio2->queue[i].sensor->name); + return ret; + } + } + + return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev); +} + +static int cio2_notifier_init(struct cio2_device *cio2) +{ + struct device *dev; + struct fwnode_handle *dev_fwn, *fwn, *fwn_remote; + struct v4l2_async_subdev *asd; + struct sensor_async_subdev *s_asd; + int ret; + + dev = &cio2->pci_dev->dev; + dev_fwn = dev_fwnode(dev); + + asd = devm_kzalloc(dev, sizeof(asd) * CIO2_QUEUES, GFP_KERNEL); + if (!asd) + return -ENOMEM; + + cio2->notifier.subdevs = (struct v4l2_async_subdev **)asd; + cio2->notifier.num_subdevs = 0; + cio2->notifier.bound = cio2_notifier_bound; + cio2->notifier.unbind = cio2_notifier_unbind; + cio2->notifier.complete = cio2_notifier_complete; + + fwn = NULL; + while (cio2->notifier.num_subdevs < CIO2_QUEUES && + (fwn = fwnode_graph_get_next_endpoint(dev_fwn, fwn))) { + s_asd = devm_kzalloc(dev, sizeof(*s_asd), GFP_KERNEL); + if (!asd) + return -ENOMEM; + + fwn_remote = fwnode_graph_get_remote_port_parent(fwn); + if (!fwn_remote) { + dev_err(dev, "bad remote port parent\n"); + return -ENOENT; + } + + ret = v4l2_fwnode_endpoint_parse(fwn, &s_asd->vfwn_endpt); + if (ret) { + dev_err(dev, "endpoint parsing error : %d\n", ret); + return ret; + } + + if (s_asd->vfwn_endpt.bus_type != V4L2_MBUS_CSI2) { + dev_warn(dev, "endpoint bus type error\n"); + devm_kfree(dev, s_asd); + continue; + } + + s_asd->asd.match.fwnode.fwnode = fwn_remote; + s_asd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; + + cio2->notifier.subdevs[cio2->notifier.num_subdevs++] = + &s_asd->asd; + } + + if (!cio2->notifier.num_subdevs) + return 0; /* No endpoint */ + + ret = v4l2_async_notifier_register(&cio2->v4l2_dev, &cio2->notifier); + if (ret) { + cio2->notifier.num_subdevs = 0; + dev_err(dev, "failed to register async notifier : %d\n", ret); + return ret; + } + + return 0; +} + +static void cio2_notifier_exit(struct cio2_device *cio2) +{ + if (cio2->notifier.num_subdevs > 0) + v4l2_async_notifier_unregister(&cio2->notifier); +} + +/**************** Queue initialization ****************/ +static const struct media_entity_operations cio2_media_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static const struct media_entity_operations cio2_video_entity_ops = { + .link_validate = cio2_video_link_validate, +}; + +int cio2_queue_init(struct cio2_device *cio2, struct cio2_queue *q) +{ + static const u32 default_width = 1936; + static const u32 default_height = 1096; + static const u32 default_mbusfmt = MEDIA_BUS_FMT_SRGGB10_1X10; + + struct video_device *vdev = &q->vdev; + struct vb2_queue *vbq = &q->vbq; + struct v4l2_subdev *subdev = &q->subdev; + struct v4l2_mbus_framefmt *fmt; + int r; + + /* Initialize miscellaneous variables */ + mutex_init(&q->lock); + + /* Initialize formats to default values */ + fmt = &q->subdev_fmt; + fmt->width = default_width; + fmt->height = default_height; + fmt->code = default_mbusfmt; + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_RAW; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + fmt->quantization = V4L2_QUANTIZATION_DEFAULT; + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + q->format.pixelformat = V4L2_PIX_FMT_IPU3_SRGGB10; + + /* Initialize fbpt */ + r = cio2_fbpt_init(cio2, q); + if (r) + goto fail_fbpt; + + /* Initialize media entities */ + r = media_entity_pads_init(&subdev->entity, CIO2_PADS, q->subdev_pads); + if (r) { + dev_err(&cio2->pci_dev->dev, + "failed initialize subdev media entity (%d)\n", r); + goto fail_subdev_media_entity; + } + q->subdev_pads[CIO2_PAD_SINK].flags = MEDIA_PAD_FL_SINK | + MEDIA_PAD_FL_MUST_CONNECT; + q->subdev_pads[CIO2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + subdev->entity.ops = &cio2_media_ops; + r = media_entity_pads_init(&vdev->entity, 1, &q->vdev_pad); + if (r) { + dev_err(&cio2->pci_dev->dev, + "failed initialize videodev media entity (%d)\n", r); + goto fail_vdev_media_entity; + } + q->vdev_pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT; + vdev->entity.ops = &cio2_video_entity_ops; + + /* Initialize subdev */ + v4l2_subdev_init(subdev, &cio2_subdev_ops); + subdev->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + subdev->owner = THIS_MODULE; + snprintf(subdev->name, sizeof(subdev->name), + CIO2_ENTITY_NAME ":%li", q - cio2->queue); + v4l2_set_subdevdata(subdev, cio2); + r = v4l2_device_register_subdev(&cio2->v4l2_dev, subdev); + if (r) { + dev_err(&cio2->pci_dev->dev, + "failed initialize subdev (%d)\n", r); + goto fail_subdev; + } + + /* Initialize vbq */ + vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vbq->io_modes = VB2_USERPTR | VB2_MMAP | VB2_DMABUF; + vbq->ops = &cio2_vb2_ops; + vbq->mem_ops = &vb2_dma_sg_memops; + vbq->buf_struct_size = sizeof(struct cio2_buffer); + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + vbq->min_buffers_needed = 1; + vbq->drv_priv = cio2; + vbq->lock = &q->lock; + r = vb2_queue_init(vbq); + if (r) { + dev_err(&cio2->pci_dev->dev, + "failed to initialize videobuf2 queue (%d)\n", r); + goto fail_vbq; + } + + /* Initialize vdev */ + snprintf(vdev->name, sizeof(vdev->name), + "%s:%li", CIO2_NAME, q - cio2->queue); + vdev->release = video_device_release_empty; + vdev->fops = &cio2_v4l2_fops; + vdev->ioctl_ops = &cio2_v4l2_ioctl_ops; + vdev->lock = &cio2->lock; + vdev->v4l2_dev = &cio2->v4l2_dev; + vdev->queue = &q->vbq; + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + video_set_drvdata(vdev, cio2); + r = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (r) { + dev_err(&cio2->pci_dev->dev, + "failed to register video device (%d)\n", r); + goto fail_vdev; + } + + /* Create link from CIO2 subdev to output node */ + r = media_create_pad_link( + &subdev->entity, CIO2_PAD_SOURCE, &vdev->entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (r) + goto fail_link; + + return 0; + +fail_link: + video_unregister_device(&q->vdev); +fail_vdev: + vb2_queue_release(vbq); +fail_vbq: + v4l2_device_unregister_subdev(subdev); +fail_subdev: + media_entity_cleanup(&vdev->entity); +fail_vdev_media_entity: + media_entity_cleanup(&subdev->entity); +fail_subdev_media_entity: + cio2_fbpt_exit(q, &cio2->pci_dev->dev); +fail_fbpt: + mutex_destroy(&q->lock); + + return r; +} + +static void cio2_queue_exit(struct cio2_device *cio2, struct cio2_queue *q) +{ + video_unregister_device(&q->vdev); + media_entity_cleanup(&q->vdev.entity); + vb2_queue_release(&q->vbq); + v4l2_device_unregister_subdev(&q->subdev); + media_entity_cleanup(&q->subdev.entity); + cio2_fbpt_exit(q, &cio2->pci_dev->dev); + mutex_destroy(&q->lock); +} + +/**************** PCI interface ****************/ + +static int cio2_pci_config_setup(struct pci_dev *dev) +{ + u16 pci_command; + int r = pci_enable_msi(dev); + + if (r) { + dev_err(&dev->dev, "failed to enable MSI (%d)\n", r); + return r; + } + + pci_read_config_word(dev, PCI_COMMAND, &pci_command); + pci_command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(dev, PCI_COMMAND, pci_command); + + return 0; +} + +static int cio2_pci_probe(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + struct cio2_device *cio2; + phys_addr_t phys; + void __iomem *const *iomap; + int i = -1, r = -ENODEV; + + cio2 = devm_kzalloc(&pci_dev->dev, sizeof(*cio2), GFP_KERNEL); + if (!cio2) + return -ENOMEM; + cio2->pci_dev = pci_dev; + + r = pcim_enable_device(pci_dev); + if (r) { + dev_err(&pci_dev->dev, "failed to enable device (%d)\n", r); + return r; + } + + dev_info(&pci_dev->dev, "device 0x%x (rev: 0x%x)\n", + pci_dev->device, pci_dev->revision); + + phys = pci_resource_start(pci_dev, CIO2_PCI_BAR); + + r = pcim_iomap_regions(pci_dev, 1 << CIO2_PCI_BAR, pci_name(pci_dev)); + if (r) { + dev_err(&pci_dev->dev, "failed to remap I/O memory (%d)\n", r); + return -ENODEV; + } + + iomap = pcim_iomap_table(pci_dev); + if (!iomap) { + dev_err(&pci_dev->dev, "failed to iomap table\n"); + return -ENODEV; + } + + cio2->base = iomap[CIO2_PCI_BAR]; + + pci_set_drvdata(pci_dev, cio2); + + pci_set_master(pci_dev); + + r = pci_set_dma_mask(pci_dev, CIO2_DMA_MASK); + if (r) { + dev_err(&pci_dev->dev, "failed to set DMA mask (%d)\n", r); + return -ENODEV; + } + + r = cio2_pci_config_setup(pci_dev); + if (r) + return -ENODEV; + + mutex_init(&cio2->lock); + + cio2->media_dev.dev = &cio2->pci_dev->dev; + strlcpy(cio2->media_dev.model, CIO2_DEVICE_NAME, + sizeof(cio2->media_dev.model)); + snprintf(cio2->media_dev.bus_info, sizeof(cio2->media_dev.bus_info), + "PCI:%s", pci_name(cio2->pci_dev)); + cio2->media_dev.driver_version = LINUX_VERSION_CODE; + cio2->media_dev.hw_revision = 0; + + media_device_init(&cio2->media_dev); + r = media_device_register(&cio2->media_dev); + if (r < 0) + goto fail_mutex_destroy; + + cio2->v4l2_dev.mdev = &cio2->media_dev; + r = v4l2_device_register(&pci_dev->dev, &cio2->v4l2_dev); + if (r) { + dev_err(&pci_dev->dev, + "failed to register V4L2 device (%d)\n", r); + goto fail_mutex_destroy; + } + + for (i = 0; i < CIO2_QUEUES; i++) { + r = cio2_queue_init(cio2, &cio2->queue[i]); + if (r) + goto fail; + } + + r = cio2_fbpt_init_dummy(cio2); + if (r) + goto fail; + + /* Register notifier for subdevices we care */ + r = cio2_notifier_init(cio2); + if (r) + goto fail; + + r = devm_request_irq(&pci_dev->dev, pci_dev->irq, cio2_irq, + IRQF_SHARED, CIO2_NAME, cio2); + if (r) { + dev_err(&pci_dev->dev, "failed to request IRQ (%d)\n", r); + goto fail; + } + + pm_runtime_put_noidle(&pci_dev->dev); + pm_runtime_allow(&pci_dev->dev); + + return 0; + +fail: + cio2_notifier_exit(cio2); + cio2_fbpt_exit_dummy(cio2); + for (; i >= 0; i--) + cio2_queue_exit(cio2, &cio2->queue[i]); + v4l2_device_unregister(&cio2->v4l2_dev); + media_device_unregister(&cio2->media_dev); + media_device_cleanup(&cio2->media_dev); +fail_mutex_destroy: + mutex_destroy(&cio2->lock); + + return r; +} + +static void cio2_pci_remove(struct pci_dev *pci_dev) +{ + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + unsigned int i; + + cio2_notifier_exit(cio2); + cio2_fbpt_exit_dummy(cio2); + for (i = 0; i < CIO2_QUEUES; i++) + cio2_queue_exit(cio2, &cio2->queue[i]); + v4l2_device_unregister(&cio2->v4l2_dev); + media_device_unregister(&cio2->media_dev); + media_device_cleanup(&cio2->media_dev); + mutex_destroy(&cio2->lock); +} + +static int cio2_runtime_suspend(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + void __iomem *const base = cio2->base; + u16 pm; + + writel(CIO2_D0I3C_I3, base + CIO2_REG_D0I3C); + dev_dbg(dev, "cio2 runtime suspend.\n"); + + pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, + &pm); + pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT; + pm |= CIO2_PMCSR_D3; + pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, + pm); + + return 0; +} + +static int cio2_runtime_resume(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct cio2_device *cio2 = pci_get_drvdata(pci_dev); + void __iomem *const base = cio2->base; + u16 pm; + + writel(CIO2_D0I3C_RR, base + CIO2_REG_D0I3C); + dev_dbg(dev, "cio2 runtime resume.\n"); + + pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, + &pm); + pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT; + pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, + pm); + + return 0; +} + +static const struct dev_pm_ops cio2_pm_ops = { + SET_RUNTIME_PM_OPS(&cio2_runtime_suspend, + &cio2_runtime_resume, NULL) +}; + +static const struct pci_device_id cio2_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, CIO2_PCI_ID) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, cio2_pci_id_table); + +static struct pci_driver cio2_pci_driver = { + .name = CIO2_NAME, + .id_table = cio2_pci_id_table, + .probe = cio2_pci_probe, + .remove = cio2_pci_remove, + .driver = { + .pm = &cio2_pm_ops, + }, +}; + +module_pci_driver(cio2_pci_driver); + +MODULE_AUTHOR("Tuukka Toivonen <tuukka.toivo...@intel.com>"); +MODULE_AUTHOR("Tianshu Qiu <tian.shu....@intel.com>"); +MODULE_AUTHOR("Jian Xu Zheng <jian.xu.zh...@intel.com>"); +MODULE_AUTHOR("Yuning Pu <yuning...@intel.com>"); +MODULE_AUTHOR("Yong Zhi <yong....@intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("IPU3 CIO2 driver"); diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.h b/drivers/media/pci/intel/ipu3/ipu3-cio2.h new file mode 100644 index 0000000..e33d3fc --- /dev/null +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.h @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __IPU3_CIO2_H +#define __IPU3_CIO2_H + +#define CIO2_NAME "ipu3-cio2" +#define CIO2_DEVICE_NAME "Intel IPU3 CIO2" +#define CIO2_ENTITY_NAME "ipu3-csi2" +#define CIO2_PCI_ID 0x9d32 +#define CIO2_PCI_BAR 0 +#define CIO2_DMA_MASK DMA_BIT_MASK(39) +/* 1 for each sensor */ +#define CIO2_QUEUES 2 +/* 32MB = 8xFBPT_entry */ +#define CIO2_MAX_LOPS 8 +#define CIO2_MAX_BUFFERS (PAGE_SIZE / 16 / CIO2_MAX_LOPS) + +#define CIO2_PAD_SINK 0 +#define CIO2_PAD_SOURCE 1 +#define CIO2_PADS 2 + +#define CIO2_NUM_DMA_CHAN 20 +#define CIO2_NUM_PORTS 4 /* DPHYs */ + +/* Register and bit field definitions */ +#define CIO2_REG_PIPE_BASE(n) ((n) * 0x0400) /* n = 0..3 */ +#define CIO2_REG_CSIRX_BASE 0x000 +#define CIO2_REG_MIPIBE_BASE 0x100 +#define CIO2_REG_PIXELGEN_BAS 0x200 +#define CIO2_REG_IRQCTRL_BASE 0x300 +#define CIO2_REG_GPREG_BASE 0x1000 + +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_CSIRX_BASE */ +#define CIO2_REG_CSIRX_ENABLE (CIO2_REG_CSIRX_BASE + 0x0) +#define CIO2_REG_CSIRX_NOF_ENABLED_LANES (CIO2_REG_CSIRX_BASE + 0x4) +#define CIO2_REG_CSIRX_SP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x10) +#define CIO2_REG_CSIRX_LP_IF_CONFIG (CIO2_REG_CSIRX_BASE + 0x14) +#define CIO2_CSIRX_IF_CONFIG_FILTEROUT 0x00 +#define CIO2_CSIRX_IF_CONFIG_FILTEROUT_VC_INACTIVE 0x01 +#define CIO2_CSIRX_IF_CONFIG_PASS 0x02 +#define CIO2_CSIRX_IF_CONFIG_FLAG_ERROR BIT(2) +#define CIO2_REG_CSIRX_STATUS (CIO2_REG_CSIRX_BASE + 0x18) +#define CIO2_REG_CSIRX_STATUS_DLANE_HS (CIO2_REG_CSIRX_BASE + 0x1c) +#define CIO2_CSIRX_STATUS_DLANE_HS_MASK 0xff +#define CIO2_REG_CSIRX_STATUS_DLANE_LP (CIO2_REG_CSIRX_BASE + 0x20) +#define CIO2_CSIRX_STATUS_DLANE_LP_MASK 0xffffff +/* Termination enable and settle in 0.0625ns units, lane=0..3 or -1 for clock */ +#define CIO2_REG_CSIRX_DLY_CNT_TERMEN(lane) \ + (CIO2_REG_CSIRX_BASE + 0x2c + 8*(lane)) +#define CIO2_REG_CSIRX_DLY_CNT_SETTLE(lane) \ + (CIO2_REG_CSIRX_BASE + 0x30 + 8*(lane)) +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_MIPIBE_BASE */ +#define CIO2_REG_MIPIBE_ENABLE (CIO2_REG_MIPIBE_BASE + 0x0) +#define CIO2_REG_MIPIBE_STATUS (CIO2_REG_MIPIBE_BASE + 0x4) +#define CIO2_REG_MIPIBE_COMP_FORMAT(vc) \ + (CIO2_REG_MIPIBE_BASE + 0x8 + 0x4*(vc)) +#define CIO2_REG_MIPIBE_FORCE_RAW8 (CIO2_REG_MIPIBE_BASE + 0x20) +#define CIO2_REG_MIPIBE_FORCE_RAW8_ENABLE BIT(0) +#define CIO2_REG_MIPIBE_FORCE_RAW8_USE_TYPEID BIT(1) +#define CIO2_REG_MIPIBE_FORCE_RAW8_TYPEID_SHIFT 2 + +#define CIO2_REG_MIPIBE_IRQ_STATUS (CIO2_REG_MIPIBE_BASE + 0x24) +#define CIO2_REG_MIPIBE_IRQ_CLEAR (CIO2_REG_MIPIBE_BASE + 0x28) +#define CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD (CIO2_REG_MIPIBE_BASE + 0x68) +#define CIO2_MIPIBE_GLOBAL_LUT_DISREGARD 1 +#define CIO2_REG_MIPIBE_PKT_STALL_STATUS (CIO2_REG_MIPIBE_BASE + 0x6c) +#define CIO2_REG_MIPIBE_PARSE_GSP_THROUGH_LP_LUT_REG_IDX \ + (CIO2_REG_MIPIBE_BASE + 0x70) +#define CIO2_REG_MIPIBE_SP_LUT_ENTRY(vc) \ + (CIO2_REG_MIPIBE_BASE + 0x74 + 4*(vc)) +#define CIO2_REG_MIPIBE_LP_LUT_ENTRY(m) /* m = 0..15 */ \ + (CIO2_REG_MIPIBE_BASE + 0x84 + 4*(m)) +#define CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD 1 +#define CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT 1 +#define CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT 5 +#define CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT 7 + +/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_IRQCTRL_BASE */ +/* IRQ registers are 18-bit wide, see cio2_irq_error for bit definitions */ +#define CIO2_REG_IRQCTRL_EDGE (CIO2_REG_IRQCTRL_BASE + 0x00) +#define CIO2_REG_IRQCTRL_MASK (CIO2_REG_IRQCTRL_BASE + 0x04) +#define CIO2_REG_IRQCTRL_STATUS (CIO2_REG_IRQCTRL_BASE + 0x08) +#define CIO2_REG_IRQCTRL_CLEAR (CIO2_REG_IRQCTRL_BASE + 0x0c) +#define CIO2_REG_IRQCTRL_ENABLE (CIO2_REG_IRQCTRL_BASE + 0x10) +#define CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE (CIO2_REG_IRQCTRL_BASE + 0x14) + +#define CIO2_REG_GPREG_SRST (CIO2_REG_GPREG_BASE + 0x0) +#define CIO2_GPREG_SRST_ALL 0xffff /* Reset all */ +#define CIO2_REG_FB_HPLL_FREQ (CIO2_REG_GPREG_BASE + 0x08) +#define CIO2_REG_ISCLK_RATIO (CIO2_REG_GPREG_BASE + 0xc) + +#define CIO2_REG_CGC 0x1400 +#define CIO2_CGC_CSI2_TGE BIT(0) +#define CIO2_CGC_PRIM_TGE BIT(1) +#define CIO2_CGC_SIDE_TGE BIT(2) +#define CIO2_CGC_XOSC_TGE BIT(3) +#define CIO2_CGC_MPLL_SHUTDOWN_EN BIT(4) +#define CIO2_CGC_D3I3_TGE BIT(5) +#define CIO2_CGC_CSI2_INTERFRAME_TGE BIT(6) +#define CIO2_CGC_CSI2_PORT_DCGE BIT(8) +#define CIO2_CGC_CSI2_DCGE BIT(9) +#define CIO2_CGC_SIDE_DCGE BIT(10) +#define CIO2_CGC_PRIM_DCGE BIT(11) +#define CIO2_CGC_ROSC_DCGE BIT(12) +#define CIO2_CGC_XOSC_DCGE BIT(13) +#define CIO2_CGC_FLIS_DCGE BIT(14) +#define CIO2_CGC_CLKGATE_HOLDOFF_SHIFT 20 +#define CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT 24 +#define CIO2_REG_D0I3C 0x1408 +#define CIO2_D0I3C_I3 BIT(2) /* Set D0I3 */ +#define CIO2_D0I3C_RR BIT(3) /* Restore? */ +#define CIO2_REG_SWRESET 0x140c +#define CIO2_SWRESET_SWRESET 1 +#define CIO2_REG_SENSOR_ACTIVE 0x1410 +#define CIO2_REG_INT_STS 0x1414 +#define CIO2_REG_INT_STS_EXT_OE 0x1418 +#define CIO2_INT_EXT_OE_DMAOE_SHIFT 0 +#define CIO2_INT_EXT_OE_DMAOE_MASK 0x7ffff +#define CIO2_INT_EXT_OE_OES_SHIFT 24 +#define CIO2_INT_EXT_OE_OES_MASK (0xf << CIO2_INT_EXT_OE_OES_SHIFT) +#define CIO2_REG_INT_EN 0x1420 +#define CIO2_REG_INT_EN_IRQ (1 << 24) +#define CIO2_REG_INT_EN_IOS(dma) (1 << (((dma) >> 1) + 12)) +/* + * Interrupt on completion bit, Eg. DMA 0-3 maps to bit 0-3, + * DMA4 & DMA5 map to bit 4 ... DMA18 & DMA19 map to bit 11 Et cetera + */ +#define CIO2_INT_IOC(dma) (1 << ((dma) < 4 ? (dma) : ((dma) >> 1) + 2)) +#define CIO2_INT_IOC_SHIFT 0 +#define CIO2_INT_IOC_MASK (0x7ff << CIO2_INT_IOC_SHIFT) +#define CIO2_INT_IOS_IOLN(dma) (1 << (((dma) >> 1) + 12)) +#define CIO2_INT_IOS_IOLN_SHIFT 12 +#define CIO2_INT_IOS_IOLN_MASK (0x3ff << CIO2_INT_IOS_IOLN_SHIFT) +#define CIO2_INT_IOIE BIT(22) +#define CIO2_INT_IOOE BIT(23) +#define CIO2_INT_IOIRQ BIT(24) +#define CIO2_REG_INT_EN_EXT_OE 0x1424 +#define CIO2_REG_DMA_DBG 0x1448 +#define CIO2_REG_DMA_DBG_DMA_INDEX_SHIFT 0 +#define CIO2_REG_PBM_ARB_CTRL 0x1460 +#define CIO2_PBM_ARB_CTRL_LANES_DIV 0 /* 4-4-2-2 lanes */ +#define CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT 0 +#define CIO2_PBM_ARB_CTRL_LE_EN BIT(7) +#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN 2 +#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT 8 +#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP 480 +#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT 16 +#define CIO2_REG_PBM_WMCTRL1 0x1464 +#define CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT 0 +#define CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT 8 +#define CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT 16 +#define CIO2_PBM_WMCTRL1_TS_COUNT_DISABLE BIT(31) +#define CIO2_PBM_WMCTRL1_MIN_2CK (4 << CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT) +#define CIO2_PBM_WMCTRL1_MID1_2CK (16 << CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT) +#define CIO2_PBM_WMCTRL1_MID2_2CK (21 << CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT) +#define CIO2_REG_PBM_WMCTRL2 0x1468 +#define CIO2_PBM_WMCTRL2_HWM_2CK 48 +#define CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT 0 +#define CIO2_PBM_WMCTRL2_LWM_2CK 22 +#define CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT 8 +#define CIO2_PBM_WMCTRL2_OBFFWM_2CK 2 +#define CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT 16 +#define CIO2_PBM_WMCTRL2_TRANSDYN 1 +#define CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT 24 +#define CIO2_PBM_WMCTRL2_DYNWMEN BIT(28) +#define CIO2_PBM_WMCTRL2_OBFF_MEM_EN BIT(29) +#define CIO2_PBM_WMCTRL2_OBFF_CPU_EN BIT(30) +#define CIO2_PBM_WMCTRL2_DRAINNOW BIT(31) +#define CIO2_REG_PBM_TS_COUNT 0x146c +#define CIO2_REG_PBM_FOPN_ABORT 0x1474 +/* below n = 0..3 */ +#define CIO2_PBM_FOPN_ABORT(n) (0x1 << 8*(n)) +#define CIO2_PBM_FOPN_FORCE_ABORT(n) (0x2 << 8*(n)) +#define CIO2_PBM_FOPN_FRAMEOPEN(n) (0x8 << 8*(n)) +#define CIO2_REG_LTRCTRL 0x1480 +#define CIO2_LTRCTRL_LTRDYNEN BIT(16) +#define CIO2_LTRCTRL_LTRSTABLETIME_SHIFT 8 +#define CIO2_LTRCTRL_LTRSTABLETIME_MASK 0xff +#define CIO2_LTRCTRL_LTRSEL1S3 BIT(7) +#define CIO2_LTRCTRL_LTRSEL1S2 BIT(6) +#define CIO2_LTRCTRL_LTRSEL1S1 BIT(5) +#define CIO2_LTRCTRL_LTRSEL1S0 BIT(4) +#define CIO2_LTRCTRL_LTRSEL2S3 BIT(3) +#define CIO2_LTRCTRL_LTRSEL2S2 BIT(2) +#define CIO2_LTRCTRL_LTRSEL2S1 BIT(1) +#define CIO2_LTRCTRL_LTRSEL2S0 BIT(0) +#define CIO2_REG_LTRVAL23 0x1484 +#define CIO2_REG_LTRVAL01 0x1488 +#define CIO2_LTRVAL02_VAL_SHIFT 0 +#define CIO2_LTRVAL02_SCALE_SHIFT 10 +#define CIO2_LTRVAL13_VAL_SHIFT 16 +#define CIO2_LTRVAL13_SCALE_SHIFT 26 + +#define CIO2_REG_CDMABA(n) (0x1500 + 0x10*(n)) /* n = 0..19 */ +#define CIO2_REG_CDMARI(n) (0x1504 + 0x10*(n)) +#define CIO2_CDMARI_FBPT_RP_SHIFT 0 +#define CIO2_CDMARI_FBPT_RP_MASK 0xff +#define CIO2_REG_CDMAC0(n) (0x1508 + 0x10*(n)) +#define CIO2_CDMAC0_FBPT_LEN_SHIFT 0 +#define CIO2_CDMAC0_FBPT_WIDTH_SHIFT 8 +#define CIO2_CDMAC0_FBPT_NS BIT(25) +#define CIO2_CDMAC0_DMA_INTR_ON_FS BIT(26) +#define CIO2_CDMAC0_DMA_INTR_ON_FE BIT(27) +#define CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL BIT(28) +#define CIO2_CDMAC0_FBPT_FIFO_FULL_FIX_DIS BIT(29) +#define CIO2_CDMAC0_DMA_EN BIT(30) +#define CIO2_CDMAC0_DMA_HALTED BIT(31) +#define CIO2_REG_CDMAC1(n) (0x150c + 0x10*(n)) +#define CIO2_CDMAC1_LINENUMINT_SHIFT 0 +#define CIO2_CDMAC1_LINENUMUPDATE_SHIFT 16 +/* n = 0..3 */ +#define CIO2_REG_PXM_PXF_FMT_CFG0(n) (0x1700 + 0x30*(n)) +#define CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT 0 +#define CIO2_PXM_PXF_FMT_CFG_SID1_SHIFT 16 +#define CIO2_PXM_PXF_FMT_CFG_PCK_64B (0 << 0) +#define CIO2_PXM_PXF_FMT_CFG_PCK_32B (1 << 0) +#define CIO2_PXM_PXF_FMT_CFG_BPP_08 (0 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_10 (1 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_12 (2 << 2) +#define CIO2_PXM_PXF_FMT_CFG_BPP_14 (3 << 2) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_4PPC (0 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_RGBA (1 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_ARGB (2 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR2 (3 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR3 (4 << 4) +#define CIO2_PXM_PXF_FMT_CFG_SPEC_NV16 (5 << 4) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_AB (1 << 7) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_CD (1 << 8) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_AC (1 << 9) +#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_BD (1 << 10) +#define CIO2_REG_INT_STS_EXT_IE 0x17e4 +#define CIO2_REG_INT_EN_EXT_IE 0x17e8 +#define CIO2_INT_EXT_IE_ECC_RE(n) (0x01 << (8 * (n))) +#define CIO2_INT_EXT_IE_DPHY_NR(n) (0x02 << (8 * (n))) +#define CIO2_INT_EXT_IE_ECC_NR(n) (0x04 << (8 * (n))) +#define CIO2_INT_EXT_IE_CRCERR(n) (0x08 << (8 * (n))) +#define CIO2_INT_EXT_IE_INTERFRAMEDATA(n) (0x10 << (8 * (n))) +#define CIO2_INT_EXT_IE_PKT2SHORT(n) (0x20 << (8 * (n))) +#define CIO2_INT_EXT_IE_PKT2LONG(n) (0x40 << (8 * (n))) +#define CIO2_INT_EXT_IE_IRQ(n) (0x80 << (8 * (n))) +#define CIO2_REG_PXM_FRF_CFG(n) (0x1720 + 0x30*(n)) +#define CIO2_PXM_FRF_CFG_FNSEL BIT(0) +#define CIO2_PXM_FRF_CFG_FN_RST BIT(1) +#define CIO2_PXM_FRF_CFG_ABORT BIT(2) +#define CIO2_PXM_FRF_CFG_CRC_TH_SHIFT 3 +#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR BIT(8) +#define CIO2_PXM_FRF_CFG_MSK_ECC_RE BIT(9) +#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE BIT(10) +#define CIO2_PXM_FRF_CFG_EVEN_ODD_MODE_SHIFT 11 +#define CIO2_PXM_FRF_CFG_MASK_CRC_THRES BIT(13) +#define CIO2_PXM_FRF_CFG_MASK_CSI_ACCEPT BIT(14) +#define CIO2_PXM_FRF_CFG_CIOHC_FS_MODE BIT(15) +#define CIO2_PXM_FRF_CFG_CIOHC_FRST_FRM_SHIFT 16 +#define CIO2_REG_PXM_SID2BID0(n) (0x1724 + 0x30*(n)) +#define CIO2_FB_HPLL_FREQ 0x2 +#define CIO2_ISCLK_RATIO 0xc + +#define CIO2_IRQCTRL_MASK 0x3ffff + +#define CIO2_INT_EN_EXT_OE_MASK 0x8f0fffff + +#define CIO2_CGC_CLKGATE_HOLDOFF 3 +#define CIO2_CGC_CSI_CLKGATE_HOLDOFF 5 + +#define CIO2_LTRVAL0_VAL 500 +/* Value times 1024 ns */ +#define CIO2_LTRVAL0_SCALE 2 +#define CIO2_LTRVAL1_VAL 90 +#define CIO2_LTRVAL1_SCALE 2 +#define CIO2_LTRVAL2_VAL 90 +#define CIO2_LTRVAL2_SCALE 2 +#define CIO2_LTRVAL3_VAL 90 +#define CIO2_LTRVAL3_SCALE 2 + +#define CIO2_PXM_FRF_CFG_CRC_TH 16 + +#define CIO2_INT_EN_EXT_IE_MASK 0xffffffff + +#define CIO2_DMA_CHAN 0 + +#define CIO2_CSIRX_DLY_CNT_CLANE_IDX -1 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A 0 +#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B 0 +#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A 95 +#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B -8 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A 0 +#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B 0 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A 85 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B -2 + +#define CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT 0x4 +#define CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT 0x570 + +#define CIO2_PMCSR_OFFSET 4 +#define CIO2_PMCSR_D0D3_SHIFT 2 +#define CIO2_PMCSR_D3 0x3 + +struct cio2_csi2_timing { + s32 clk_termen; + s32 clk_settle; + s32 dat_termen; + s32 dat_settle; +}; + +struct cio2_buffer { + struct vb2_v4l2_buffer vbb; + u32 *lop[CIO2_MAX_LOPS]; + dma_addr_t lop_bus_addr[CIO2_MAX_LOPS]; +}; + +struct csi2_bus_info { + u32 port; + u32 num_of_lanes; +}; + +struct cio2_queue { + /* mutex to be used by vb2_queue */ + struct mutex lock; + struct media_pipeline pipe; + struct csi2_bus_info csi2; + struct v4l2_subdev *sensor; + void __iomem *csi_rx_base; + + /* Subdev, /dev/v4l-subdevX */ + struct v4l2_subdev subdev; + struct media_pad subdev_pads[CIO2_PADS]; + struct v4l2_mbus_framefmt subdev_fmt; + atomic_t frame_sequence; + + /* Video device, /dev/videoX */ + struct video_device vdev; + struct media_pad vdev_pad; + struct v4l2_pix_format format; + struct vb2_queue vbq; + + /* Buffer queue handling */ + struct cio2_fbpt_entry *fbpt; /* Frame buffer pointer table */ + dma_addr_t fbpt_bus_addr; + struct cio2_buffer *bufs[CIO2_MAX_BUFFERS]; + unsigned int bufs_first; /* Index of the first used entry */ + unsigned int bufs_next; /* Index of the first unused entry */ + atomic_t bufs_queued; +}; + +struct cio2_device { + struct pci_dev *pci_dev; + void __iomem *base; + struct v4l2_device v4l2_dev; + struct cio2_queue queue[CIO2_QUEUES]; + struct cio2_queue *cur_queue; + /* mutex to be used by video_device */ + struct mutex lock; + + struct v4l2_async_notifier notifier; + struct media_device media_dev; + + /* + * Safety net to catch DMA fetch ahead + * when reaching the end of LOP + */ + void *dummy_page; + /* DMA handle of dummy_page */ + dma_addr_t dummy_page_bus_addr; + /* single List of Pointers (LOP) page */ + u32 *dummy_lop; + /* DMA handle of dummy_lop */ + dma_addr_t dummy_lop_bus_addr; +}; + +/**************** Virtual channel ****************/ +/* + * This should come from sensor driver. No + * driver interface nor requirement yet. + */ +#define SENSOR_VIR_CH_DFLT 0 + +/**************** FBPT operations ****************/ +#define CIO2_FBPT_SIZE (CIO2_MAX_BUFFERS * CIO2_MAX_LOPS * \ + sizeof(struct cio2_fbpt_entry)) + +#define CIO2_FBPT_SUBENTRY_UNIT 4 +#define CIO2_PAGE_SIZE PAGE_SIZE + +/* + * Frame Buffer Pointer Table(FBPT) entry + * each entry describe an output buffer and consists of + * several sub-entries + */ +struct __packed cio2_fbpt_entry { + union { + struct __packed { + u32 ctrl; /* status ctrl */ +#define CIO2_FBPT_CTRL_VALID BIT(0) +#define CIO2_FBPT_CTRL_IOC BIT(1) +#define CIO2_FBPT_CTRL_IOS BIT(2) +#define CIO2_FBPT_CTRL_SUCCXFAIL BIT(3) +#define CIO2_FBPT_CTRL_CMPLCODE_SHIFT 4 + u16 cur_line_num; /* current line # written to DDR */ + u16 frame_num; /* updated by DMA upon FE */ + u32 first_page_offset; /* offset for 1st page in LOP */ + } first_entry; + /* Second entry per buffer */ + struct __packed { + u32 timestamp; + u32 num_of_bytes; + /* the number of bytes for write on last page */ + u16 last_page_available_bytes; + /* the number of pages allocated for this buf */ + u16 num_of_pages; + } second_entry; + struct __packed { + u64 __reserved1; + u32 __reserved0; + } other_entries; + }; + u32 lop_page_addr; /* Points to list of pointers (LOP) table */ +}; + +static inline struct cio2_queue *file_to_cio2_queue(struct file *file) +{ + return container_of(video_devdata(file), struct cio2_queue, vdev); +} + +static inline struct cio2_queue *vb2q_to_cio2_queue(struct vb2_queue *vq) +{ + return container_of(vq, struct cio2_queue, vbq); +} + +#endif -- 2.7.4