From: Adam Ford <adam.f...@logicpd.com>
By default the camera driver only supports monochrome or color at 12-bit.
This patch will allow the camera to choose between 12-bit or 8-bit resolution.
Tested on Logic PD DM3730 Torpedo Development Kit.
Signed-off-by: Adam Ford <adam.f...@logicpd.com>
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
index cb60443..77b0dc1 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -15,6 +15,7 @@ Required Properties:
Optional Properties:
- reset-gpios: Chip reset GPIO
+- resolution: Empty (12-bit) or 8 bit resolution
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 91d822f..355791d 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -1024,6 +1024,7 @@ mt9p031_get_pdata(struct i2c_client *client)
of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq);
of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq);
+ of_property_read_u32(np, "resolution", &pdata->resolution);
done:
of_node_put(np);
@@ -1058,6 +1059,7 @@ static int mt9p031_probe(struct i2c_client *client,
mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF;
mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC;
mt9p031->model = did->driver_data;
+ mt9p031->resolution = pdata->resolution;
mt9p031->regulators[0].supply = "vdd";
mt9p031->regulators[1].supply = "vdd_io";
@@ -1123,11 +1125,18 @@ static int mt9p031_probe(struct i2c_client *client,
mt9p031->crop.left = MT9P031_COLUMN_START_DEF;
mt9p031->crop.top = MT9P031_ROW_START_DEF;
- if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
- mt9p031->format.code = MEDIA_BUS_FMT_Y12_1X12;
- else
- mt9p031->format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
-
+ if (mt9p031->model == MT9P031_MODEL_MONOCHROME) {
+ if (mt9p031->resolution == 8)
+ mt9p031->format.code = MEDIA_BUS_FMT_Y8_1X8;
+ else
+ mt9p031->format.code = MEDIA_BUS_FMT_Y12_1X12;
+ }
+ else {
+ if (mt9p031->resolution == 8)
+ mt9p031->format.code = MEDIA_BUS_FMT_SGRBG8_1X8;
+ else
+ mt9p031->format.code = MEDIA_BUS_FMT_SGRBG12_1X12;
+ }
mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF;
mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF;
mt9p031->format.field = V4L2_FIELD_NONE;
diff --git a/include/media/i2c/mt9p031.h b/include/media/i2c/mt9p031.h
index 1ba3612..84335cb 100644
--- a/include/media/i2c/mt9p031.h
+++ b/include/media/i2c/mt9p031.h
@@ -11,6 +11,7 @@ struct v4l2_subdev;
struct mt9p031_platform_data {
int ext_freq;
int target_freq;
+ int resolution;
};
#endif
--
2.7.4
