From: Pavel Machek <pa...@ucw.cz>
Add support for parsing CSI1 configuration.
Signed-off-by: Pavel Machek <pa...@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ai...@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
Tested-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> # on
Beagleboard-xM + MPT9P031
---
drivers/media/platform/omap3isp/isp.c | 105 +++++++++++++++++++++--------
drivers/media/platform/omap3isp/omap3isp.h | 1 +
2 files changed, 79 insertions(+), 27 deletions(-)
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index 79aff6b989a1..6cb1f0495804 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2018,6 +2018,7 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwnode,
struct v4l2_fwnode_endpoint vep;
unsigned int i;
int ret;
+ bool csi1 = false;
ret = v4l2_fwnode_endpoint_parse(fwnode, &vep);
if (ret)
@@ -2047,41 +2048,91 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwnode,
case ISP_OF_PHY_CSIPHY1:
case ISP_OF_PHY_CSIPHY2:
- /* FIXME: always assume CSI-2 for now. */
+ switch (vep.bus_type) {
+ case V4L2_MBUS_CCP2:
+ case V4L2_MBUS_CSI1:
+ dev_dbg(dev, "CSI-1/CCP-2 configuration\n");
+ csi1 = true;
+ break;
+ case V4L2_MBUS_CSI2:
+ dev_dbg(dev, "CSI-2 configuration\n");
+ csi1 = false;
+ break;
+ default:
+ dev_err(dev, "unsupported bus type %u\n",
+ vep.bus_type);
+ return -EINVAL;
+ }
+
switch (vep.base.port) {
case ISP_OF_PHY_CSIPHY1:
- buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
+ if (csi1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
+ else
+ buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
break;
case ISP_OF_PHY_CSIPHY2:
- buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
+ if (csi1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
+ else
+ buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
break;
}
- buscfg->bus.csi2.lanecfg.clk.pos = vep.bus.mipi_csi2.clock_lane;
- buscfg->bus.csi2.lanecfg.clk.pol =
- vep.bus.mipi_csi2.lane_polarities[0];
- dev_dbg(dev, "clock lane polarity %u, pos %u\n",
- buscfg->bus.csi2.lanecfg.clk.pol,
- buscfg->bus.csi2.lanecfg.clk.pos);
-
- buscfg->bus.csi2.num_data_lanes =
- vep.bus.mipi_csi2.num_data_lanes;
-
- for (i = 0; i < buscfg->bus.csi2.num_data_lanes; i++) {
- buscfg->bus.csi2.lanecfg.data[i].pos =
- vep.bus.mipi_csi2.data_lanes[i];
- buscfg->bus.csi2.lanecfg.data[i].pol =
- vep.bus.mipi_csi2.lane_polarities[i + 1];
+ if (csi1) {
+ buscfg->bus.ccp2.lanecfg.clk.pos =
+ vep.bus.mipi_csi1.clock_lane;
+ buscfg->bus.ccp2.lanecfg.clk.pol =
+ vep.bus.mipi_csi1.lane_polarity[0];
+ dev_dbg(dev, "clock lane polarity %u, pos %u\n",
+ buscfg->bus.ccp2.lanecfg.clk.pol,
+ buscfg->bus.ccp2.lanecfg.clk.pos);
+
+ buscfg->bus.ccp2.lanecfg.data[0].pos =
+ vep.bus.mipi_csi1.data_lane;
+ buscfg->bus.ccp2.lanecfg.data[0].pol =
+ vep.bus.mipi_csi1.lane_polarity[1];
+
dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
- buscfg->bus.csi2.lanecfg.data[i].pol,
- buscfg->bus.csi2.lanecfg.data[i].pos);
+ buscfg->bus.ccp2.lanecfg.data[0].pol,
+ buscfg->bus.ccp2.lanecfg.data[0].pos);
+
+ buscfg->bus.ccp2.strobe_clk_pol =
+ vep.bus.mipi_csi1.clock_inv;
+ buscfg->bus.ccp2.phy_layer = vep.bus.mipi_csi1.strobe;
+ buscfg->bus.ccp2.ccp2_mode =
+ vep.bus_type == V4L2_MBUS_CCP2;
+ buscfg->bus.ccp2.vp_clk_pol = 1;
+
+ buscfg->bus.ccp2.crc = 1;
+ } else {
+ buscfg->bus.csi2.lanecfg.clk.pos =
+ vep.bus.mipi_csi2.clock_lane;
+ buscfg->bus.csi2.lanecfg.clk.pol =
+ vep.bus.mipi_csi2.lane_polarities[0];
+ dev_dbg(dev, "clock lane polarity %u, pos %u\n",
+ buscfg->bus.csi2.lanecfg.clk.pol,
+ buscfg->bus.csi2.lanecfg.clk.pos);
+
+ buscfg->bus.csi2.num_data_lanes =
+ vep.bus.mipi_csi2.num_data_lanes;
+
+ for (i = 0; i < buscfg->bus.csi2.num_data_lanes; i++) {
+ buscfg->bus.csi2.lanecfg.data[i].pos =
+ vep.bus.mipi_csi2.data_lanes[i];
+ buscfg->bus.csi2.lanecfg.data[i].pol =
+ vep.bus.mipi_csi2.lane_polarities[i +
1];
+ dev_dbg(dev,
+ "data lane %u polarity %u, pos %u\n", i,
+ buscfg->bus.csi2.lanecfg.data[i].pol,
+ buscfg->bus.csi2.lanecfg.data[i].pos);
+ }
+ /*
+ * FIXME: now we assume the CRC is always there.
+ * Implement a way to obtain this information from the
+ * sensor. Frame descriptors, perhaps?
+ */
+ buscfg->bus.csi2.crc = 1;
}
-
- /*
- * FIXME: now we assume the CRC is always there.
- * Implement a way to obtain this information from the
- * sensor. Frame descriptors, perhaps?
- */
- buscfg->bus.csi2.crc = 1;
break;
default:
diff --git a/drivers/media/platform/omap3isp/omap3isp.h
b/drivers/media/platform/omap3isp/omap3isp.h
index dfd3cbe26ccd..9fb4d5bce004 100644
--- a/drivers/media/platform/omap3isp/omap3isp.h
+++ b/drivers/media/platform/omap3isp/omap3isp.h
@@ -110,6 +110,7 @@ struct isp_ccp2_cfg {
unsigned int ccp2_mode:1;
unsigned int phy_layer:1;
unsigned int vpclk_div:2;
+ unsigned int vp_clk_pol:1;
struct isp_csiphy_lanes_cfg lanecfg;
};
--
2.11.0
