[Patch 1/6] ARM: dts: DRA72: Add CAL dtsi node

[Benoit Parrot]

This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

- Added CAL entry in dra72x.dtsi.

Signed-off-by: Benoit Parrot <bpar...@ti.com>
---
 arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index 67107605fb4c..d0ba4f238084 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,37 @@
                interrupt-parent = <&wakeupgen>;
                interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
        };
+
+       ocp {
+               cal: cal@4845b000 {
+                       compatible = "ti,dra72-cal";
+                       ti,hwmods = "cal";
+                       reg = <0x4845B000 0x400>,
+                             <0x4845B800 0x40>,
+                             <0x4845B900 0x40>,
+                             <0x4A002e94 0x4>;
+                       reg-names = "cal_top",
+                                   "cal_rx_core0",
+                                   "cal_rx_core1",
+                                   "camerrx_control";
+                       interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               csi2_0: port@0 {
+                                       reg = <0>;
+                               };
+                               csi2_1: port@1 {
+                                       reg = <1>;
+                               };
+                       };
+               };
+       };
 };
 
 &dss {
-- 
2.9.0