mt9v032_power_on() leaves clk enabled in case of errors, but it is not expected by its callers. There is a similar problem in mt9v032_registered().
Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshi...@ispras.ru> --- drivers/media/i2c/mt9v032.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c index 8a430640c85d..4de63b2df334 100644 --- a/drivers/media/i2c/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -294,14 +294,22 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032) /* Reset the chip and stop data read out */ ret = regmap_write(map, MT9V032_RESET, 1); if (ret < 0) - return ret; + goto err; ret = regmap_write(map, MT9V032_RESET, 0); if (ret < 0) - return ret; + goto err; + + ret = regmap_write(map, MT9V032_CHIP_CONTROL, + MT9V032_CHIP_CONTROL_MASTER_MODE); + if (ret < 0) + goto err; + + return 0; - return regmap_write(map, MT9V032_CHIP_CONTROL, - MT9V032_CHIP_CONTROL_MASTER_MODE); +err: + clk_disable_unprepare(mt9v032->clk); + return ret; } static void mt9v032_power_off(struct mt9v032 *mt9v032) @@ -876,6 +884,9 @@ static int mt9v032_registered(struct v4l2_subdev *subdev) /* Read and check the sensor version */ ret = regmap_read(mt9v032->regmap, MT9V032_CHIP_VERSION, &version); + + mt9v032_power_off(mt9v032); + if (ret < 0) { dev_err(&client->dev, "Failed reading chip version\n"); return ret; @@ -894,8 +905,6 @@ static int mt9v032_registered(struct v4l2_subdev *subdev) return -ENODEV; } - mt9v032_power_off(mt9v032); - dev_info(&client->dev, "%s detected at address 0x%02x\n", mt9v032->version->name, client->addr); -- 2.7.4