Niklas,
Did you look at this? If I should take it, can you Ack it? If you are
going to squash or add it to our of your own patch series, then let me
know and I can remove it from my todo queue.
Regards,
Hans
On 05/12/17 21:41, Jacopo Mondi wrote:
> When rcar-csi interface is not connected to any endpoint, it fails and
> bails out from probe before registering its own video subdevice.
> This prevents rcar-vin registered notifier from completing and no
> subdevice is ever registered, also for other properly connected csi
> interfaces.
>
> Fix this not returning an error when no endpoint is connected to a csi
> interface and let the driver complete its probe function and register its
> own video subdevice.
>
> ---
> Niklas,
> please squash this patch in your next rcar-csi2 series (if you like it ;)
>
> As we have discussed this is particularly useful for gmsl setup, where adv748x
> is connected to CSI20 and max9286 to CSI40/CSI41. If we disable adv748x from
> DTS
> we need CSI20 probe to complete anyhow otherwise no subdevice gets registered
> for the two deserializers.
>
> Please note we cannot disable CSI20 entirely otherwise VIN's graph parsing
> breaks.
>
> Thanks
> j
>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index 2793efb..90c4062 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -928,8 +928,8 @@ static int rcar_csi2_parse_dt(struct rcar_csi2 *priv)
>
> ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
> if (!ep) {
> - dev_err(priv->dev, "Not connected to subdevice\n");
> - return -EINVAL;
> + dev_dbg(priv->dev, "Not connected to subdevice\n");
> + return 0;
> }
>
> ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
> --
> 2.7.4
>
