Sakari,

Em Mon, 22 Jan 2018 13:31:19 +0100
Hans Verkuil <hverk...@xs4all.nl> escreveu:

> From: Sakari Ailus <sakari.ai...@linux.intel.com>
> 
> Remove sensor driver's interface that made use of use case specific
> knowledge of platform capabilities.

Could you better describe it? What s_param abuse?
What happens after this patch? It seems that atomISP relies on
gc0310_res. So, I would be expecting that a patch removing
s_param would be also adding/changing other parts of the code
accordingly, in order to get rid of that as a hole (or initialize
it somewhere else).

Regards,
Mauro

> 
> Signed-off-by: Sakari Ailus <sakari.ai...@linux.intel.com>
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> ---
>  drivers/staging/media/atomisp/i2c/atomisp-gc0310.c | 26 ---------
>  drivers/staging/media/atomisp/i2c/atomisp-gc2235.c | 26 ---------
>  drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 29 ---------
>  drivers/staging/media/atomisp/i2c/atomisp-ov2722.c | 26 ---------
>  drivers/staging/media/atomisp/i2c/gc0310.h         | 43 --------------
>  drivers/staging/media/atomisp/i2c/gc2235.h         |  1 -
>  drivers/staging/media/atomisp/i2c/ov2680.h         | 68 
> ----------------------
>  .../media/atomisp/i2c/ov5693/atomisp-ov5693.c      | 27 ---------
>  .../media/atomisp/pci/atomisp2/atomisp_cmd.c       |  9 +--
>  .../media/atomisp/pci/atomisp2/atomisp_subdev.c    | 12 +---
>  10 files changed, 3 insertions(+), 264 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c 
> b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> index 61b7598469eb..572c9127c24d 100644
> --- a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> @@ -1224,37 +1224,12 @@ static int gc0310_g_parm(struct v4l2_subdev *sd,
>       if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
>               param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>               param->parm.capture.timeperframe.numerator = 1;
> -             param->parm.capture.capturemode = dev->run_mode;
>               param->parm.capture.timeperframe.denominator =
>                       gc0310_res[dev->fmt_idx].fps;
>       }
>       return 0;
>  }
>  
> -static int gc0310_s_parm(struct v4l2_subdev *sd,
> -                     struct v4l2_streamparm *param)
> -{
> -     struct gc0310_device *dev = to_gc0310_sensor(sd);
> -     dev->run_mode = param->parm.capture.capturemode;
> -
> -     mutex_lock(&dev->input_lock);
> -     switch (dev->run_mode) {
> -     case CI_MODE_VIDEO:
> -             gc0310_res = gc0310_res_video;
> -             N_RES = N_RES_VIDEO;
> -             break;
> -     case CI_MODE_STILL_CAPTURE:
> -             gc0310_res = gc0310_res_still;
> -             N_RES = N_RES_STILL;
> -             break;
> -     default:
> -             gc0310_res = gc0310_res_preview;
> -             N_RES = N_RES_PREVIEW;
> -     }
> -     mutex_unlock(&dev->input_lock);
> -     return 0;
> -}
> -
>  static int gc0310_g_frame_interval(struct v4l2_subdev *sd,
>                                  struct v4l2_subdev_frame_interval *interval)
>  {
> @@ -1314,7 +1289,6 @@ static const struct v4l2_subdev_sensor_ops 
> gc0310_sensor_ops = {
>  static const struct v4l2_subdev_video_ops gc0310_video_ops = {
>       .s_stream = gc0310_s_stream,
>       .g_parm = gc0310_g_parm,
> -     .s_parm = gc0310_s_parm,
>       .g_frame_interval = gc0310_g_frame_interval,
>  };
>  
> diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c 
> b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> index d8de46da64ae..2bc179f3afe5 100644
> --- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> @@ -964,37 +964,12 @@ static int gc2235_g_parm(struct v4l2_subdev *sd,
>       if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
>               param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>               param->parm.capture.timeperframe.numerator = 1;
> -             param->parm.capture.capturemode = dev->run_mode;
>               param->parm.capture.timeperframe.denominator =
>                       gc2235_res[dev->fmt_idx].fps;
>       }
>       return 0;
>  }
>  
> -static int gc2235_s_parm(struct v4l2_subdev *sd,
> -                     struct v4l2_streamparm *param)
> -{
> -     struct gc2235_device *dev = to_gc2235_sensor(sd);
> -     dev->run_mode = param->parm.capture.capturemode;
> -
> -     mutex_lock(&dev->input_lock);
> -     switch (dev->run_mode) {
> -     case CI_MODE_VIDEO:
> -             gc2235_res = gc2235_res_video;
> -             N_RES = N_RES_VIDEO;
> -             break;
> -     case CI_MODE_STILL_CAPTURE:
> -             gc2235_res = gc2235_res_still;
> -             N_RES = N_RES_STILL;
> -             break;
> -     default:
> -             gc2235_res = gc2235_res_preview;
> -             N_RES = N_RES_PREVIEW;
> -     }
> -     mutex_unlock(&dev->input_lock);
> -     return 0;
> -}
> -
>  static int gc2235_g_frame_interval(struct v4l2_subdev *sd,
>                                  struct v4l2_subdev_frame_interval *interval)
>  {
> @@ -1053,7 +1028,6 @@ static const struct v4l2_subdev_sensor_ops 
> gc2235_sensor_ops = {
>  static const struct v4l2_subdev_video_ops gc2235_video_ops = {
>       .s_stream = gc2235_s_stream,
>       .g_parm = gc2235_g_parm,
> -     .s_parm = gc2235_s_parm,
>       .g_frame_interval = gc2235_g_frame_interval,
>  };
>  
> diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c 
> b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> index 84f8d33ce2d1..e3e0fdd0c816 100644
> --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> @@ -1300,40 +1300,12 @@ static int ov2680_g_parm(struct v4l2_subdev *sd,
>       if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
>               param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>               param->parm.capture.timeperframe.numerator = 1;
> -             param->parm.capture.capturemode = dev->run_mode;
>               param->parm.capture.timeperframe.denominator =
>                       ov2680_res[dev->fmt_idx].fps;
>       }
>       return 0;
>  }
>  
> -static int ov2680_s_parm(struct v4l2_subdev *sd,
> -                     struct v4l2_streamparm *param)
> -{
> -     struct ov2680_device *dev = to_ov2680_sensor(sd);
> -     struct i2c_client *client = v4l2_get_subdevdata(sd);
> -     dev->run_mode = param->parm.capture.capturemode;
> -
> -     v4l2_info(client, "\n%s:run_mode :%x\n", __func__, dev->run_mode);
> -
> -     mutex_lock(&dev->input_lock);
> -     switch (dev->run_mode) {
> -     case CI_MODE_VIDEO:
> -             ov2680_res = ov2680_res_video;
> -             N_RES = N_RES_VIDEO;
> -             break;
> -     case CI_MODE_STILL_CAPTURE:
> -             ov2680_res = ov2680_res_still;
> -             N_RES = N_RES_STILL;
> -             break;
> -     default:
> -             ov2680_res = ov2680_res_preview;
> -             N_RES = N_RES_PREVIEW;
> -     }
> -     mutex_unlock(&dev->input_lock);
> -     return 0;
> -}
> -
>  static int ov2680_g_frame_interval(struct v4l2_subdev *sd,
>                                  struct v4l2_subdev_frame_interval *interval)
>  {
> @@ -1388,7 +1360,6 @@ static int ov2680_g_skip_frames(struct v4l2_subdev *sd, 
> u32 *frames)
>  static const struct v4l2_subdev_video_ops ov2680_video_ops = {
>       .s_stream = ov2680_s_stream,
>       .g_parm = ov2680_g_parm,
> -     .s_parm = ov2680_s_parm,
>       .g_frame_interval = ov2680_g_frame_interval,
>  };
>  
> diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c 
> b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
> index 2b6ae0faf972..cd9f6433cd42 100644
> --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
> +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
> @@ -1103,37 +1103,12 @@ static int ov2722_g_parm(struct v4l2_subdev *sd,
>       if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
>               param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>               param->parm.capture.timeperframe.numerator = 1;
> -             param->parm.capture.capturemode = dev->run_mode;
>               param->parm.capture.timeperframe.denominator =
>                       ov2722_res[dev->fmt_idx].fps;
>       }
>       return 0;
>  }
>  
> -static int ov2722_s_parm(struct v4l2_subdev *sd,
> -                     struct v4l2_streamparm *param)
> -{
> -     struct ov2722_device *dev = to_ov2722_sensor(sd);
> -     dev->run_mode = param->parm.capture.capturemode;
> -
> -     mutex_lock(&dev->input_lock);
> -     switch (dev->run_mode) {
> -     case CI_MODE_VIDEO:
> -             ov2722_res = ov2722_res_video;
> -             N_RES = N_RES_VIDEO;
> -             break;
> -     case CI_MODE_STILL_CAPTURE:
> -             ov2722_res = ov2722_res_still;
> -             N_RES = N_RES_STILL;
> -             break;
> -     default:
> -             ov2722_res = ov2722_res_preview;
> -             N_RES = N_RES_PREVIEW;
> -     }
> -     mutex_unlock(&dev->input_lock);
> -     return 0;
> -}
> -
>  static int ov2722_g_frame_interval(struct v4l2_subdev *sd,
>                                  struct v4l2_subdev_frame_interval *interval)
>  {
> @@ -1193,7 +1168,6 @@ static const struct v4l2_subdev_sensor_ops 
> ov2722_sensor_ops = {
>  static const struct v4l2_subdev_video_ops ov2722_video_ops = {
>       .s_stream = ov2722_s_stream,
>       .g_parm = ov2722_g_parm,
> -     .s_parm = ov2722_s_parm,
>       .g_frame_interval = ov2722_g_frame_interval,
>  };
>  
> diff --git a/drivers/staging/media/atomisp/i2c/gc0310.h 
> b/drivers/staging/media/atomisp/i2c/gc0310.h
> index c422d0398fc7..af6b11f6e5e7 100644
> --- a/drivers/staging/media/atomisp/i2c/gc0310.h
> +++ b/drivers/staging/media/atomisp/i2c/gc0310.h
> @@ -150,7 +150,6 @@ struct gc0310_device {
>       struct camera_sensor_platform_data *platform_data;
>       int vt_pix_clk_freq_mhz;
>       int fmt_idx;
> -     int run_mode;
>       u8 res;
>       u8 type;
>  };
> @@ -400,48 +399,6 @@ struct gc0310_resolution gc0310_res_preview[] = {
>  };
>  #define N_RES_PREVIEW (ARRAY_SIZE(gc0310_res_preview))
>  
> -struct gc0310_resolution gc0310_res_still[] = {
> -     {
> -             .desc = "gc0310_VGA_30fps",
> -             .width = 656, // 648,
> -             .height = 496, // 488,
> -             .fps = 30,
> -             //.pix_clk_freq = 73,
> -             .used = 0,
> -#if 0
> -             .pixels_per_line = 0x0314,
> -             .lines_per_frame = 0x0213,
> -#endif
> -             .bin_factor_x = 1,
> -             .bin_factor_y = 1,
> -             .bin_mode = 0,
> -             .skip_frames = 2,
> -             .regs = gc0310_VGA_30fps,
> -     },
> -};
> -#define N_RES_STILL (ARRAY_SIZE(gc0310_res_still))
> -
> -struct gc0310_resolution gc0310_res_video[] = {
> -     {
> -             .desc = "gc0310_VGA_30fps",
> -             .width = 656, // 648,
> -             .height = 496, // 488,
> -             .fps = 30,
> -             //.pix_clk_freq = 73,
> -             .used = 0,
> -#if 0
> -             .pixels_per_line = 0x0314,
> -             .lines_per_frame = 0x0213,
> -#endif
> -             .bin_factor_x = 1,
> -             .bin_factor_y = 1,
> -             .bin_mode = 0,
> -             .skip_frames = 2,
> -             .regs = gc0310_VGA_30fps,
> -     },
> -};
> -#define N_RES_VIDEO (ARRAY_SIZE(gc0310_res_video))
> -
>  static struct gc0310_resolution *gc0310_res = gc0310_res_preview;
>  static unsigned long N_RES = N_RES_PREVIEW;
>  #endif
> diff --git a/drivers/staging/media/atomisp/i2c/gc2235.h 
> b/drivers/staging/media/atomisp/i2c/gc2235.h
> index 3c30a05c3991..45a54fea5466 100644
> --- a/drivers/staging/media/atomisp/i2c/gc2235.h
> +++ b/drivers/staging/media/atomisp/i2c/gc2235.h
> @@ -156,7 +156,6 @@ struct gc2235_device {
>       struct camera_sensor_platform_data *platform_data;
>       int vt_pix_clk_freq_mhz;
>       int fmt_idx;
> -     int run_mode;
>       u8 res;
>       u8 type;
>  };
> diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h 
> b/drivers/staging/media/atomisp/i2c/ov2680.h
> index 03f75dd80f87..cb38e6e79409 100644
> --- a/drivers/staging/media/atomisp/i2c/ov2680.h
> +++ b/drivers/staging/media/atomisp/i2c/ov2680.h
> @@ -850,74 +850,6 @@ struct ov2680_format {
>  };
>  #define N_RES_PREVIEW (ARRAY_SIZE(ov2680_res_preview))
>  
> -static struct ov2680_resolution ov2680_res_still[] = {
> -     {
> -             .desc = "ov2680_1616x1216_30fps",
> -             .width = 1616,
> -             .height = 1216,
> -             .pix_clk_freq = 66,
> -             .fps = 30,
> -             .used = 0,
> -             .pixels_per_line = 1698,//1704,
> -             .lines_per_frame = 1294,
> -             .bin_factor_x = 0,
> -             .bin_factor_y = 0,
> -             .bin_mode = 0,
> -             .skip_frames = 3,
> -             .regs = ov2680_1616x1216_30fps,
> -     },
> -     {
> -             .desc = "ov2680_1616x916_30fps",
> -             .width = 1616,
> -             .height = 916,
> -             .fps = 30,
> -             .pix_clk_freq = 66,
> -             .used = 0,
> -             .pixels_per_line = 1698,//1704,
> -             .lines_per_frame = 1294,
> -             .bin_factor_x = 0,
> -             .bin_factor_y = 0,
> -             .bin_mode = 0,
> -             .skip_frames = 3,
> -             .regs = ov2680_1616x916_30fps,
> -     },
> -};
> -#define N_RES_STILL (ARRAY_SIZE(ov2680_res_still))
> -
> -static struct ov2680_resolution ov2680_res_video[] = {
> -     {
> -             .desc = "ov2680_1616x1216_30fps",
> -             .width = 1616,
> -             .height = 1216,
> -             .pix_clk_freq = 66,
> -             .fps = 30,
> -             .used = 0,
> -             .pixels_per_line = 1698,//1704,
> -             .lines_per_frame = 1294,
> -             .bin_factor_x = 0,
> -             .bin_factor_y = 0,
> -             .bin_mode = 0,
> -             .skip_frames = 3,
> -             .regs = ov2680_1616x1216_30fps,
> -     },
> -     {
> -             .desc = "ov2680_720p_30fps",
> -             .width = 1616,
> -             .height = 916,
> -             .fps = 30,
> -             .pix_clk_freq = 66,
> -             .used = 0,
> -             .pixels_per_line = 1698,//1704,
> -             .lines_per_frame = 1294,
> -             .bin_factor_x = 0,
> -             .bin_factor_y = 0,
> -             .bin_mode = 0,
> -             .skip_frames = 3,
> -             .regs = ov2680_1616x916_30fps,
> -     },
> -};
> -#define N_RES_VIDEO (ARRAY_SIZE(ov2680_res_video))
> -
>  static struct ov2680_resolution *ov2680_res = ov2680_res_preview;
>  static unsigned long N_RES = N_RES_PREVIEW;
>  
> diff --git a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c 
> b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c
> index 40d01bf4bf28..7f594c7de76e 100644
> --- a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c
> +++ b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c
> @@ -1825,38 +1825,12 @@ static int ov5693_g_parm(struct v4l2_subdev *sd,
>       if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
>               param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>               param->parm.capture.timeperframe.numerator = 1;
> -             param->parm.capture.capturemode = dev->run_mode;
>               param->parm.capture.timeperframe.denominator =
>                       ov5693_res[dev->fmt_idx].fps;
>       }
>       return 0;
>  }
>  
> -static int ov5693_s_parm(struct v4l2_subdev *sd,
> -                     struct v4l2_streamparm *param)
> -{
> -     struct ov5693_device *dev = to_ov5693_sensor(sd);
> -
> -     dev->run_mode = param->parm.capture.capturemode;
> -
> -     mutex_lock(&dev->input_lock);
> -     switch (dev->run_mode) {
> -     case CI_MODE_VIDEO:
> -             ov5693_res = ov5693_res_video;
> -             N_RES = N_RES_VIDEO;
> -             break;
> -     case CI_MODE_STILL_CAPTURE:
> -             ov5693_res = ov5693_res_still;
> -             N_RES = N_RES_STILL;
> -             break;
> -     default:
> -             ov5693_res = ov5693_res_preview;
> -             N_RES = N_RES_PREVIEW;
> -     }
> -     mutex_unlock(&dev->input_lock);
> -     return 0;
> -}
> -
>  static int ov5693_g_frame_interval(struct v4l2_subdev *sd,
>                                  struct v4l2_subdev_frame_interval *interval)
>  {
> @@ -1900,7 +1874,6 @@ static int ov5693_enum_frame_size(struct v4l2_subdev 
> *sd,
>  static const struct v4l2_subdev_video_ops ov5693_video_ops = {
>       .s_stream = ov5693_s_stream,
>       .g_parm = ov5693_g_parm,
> -     .s_parm = ov5693_s_parm,
>       .g_frame_interval = ov5693_g_frame_interval,
>  };
>  
> diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c 
> b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c
> index debf0e3853ff..3410a7fb1fcf 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c
> @@ -2091,7 +2091,7 @@ int atomisp_set_sensor_runmode(struct 
> atomisp_sub_device *asd,
>       struct atomisp_device *isp = asd->isp;
>       struct v4l2_ctrl *c;
>       struct v4l2_streamparm p = {0};
> -     int ret;
> +     int ret = 0;
>       int modes[] = { CI_MODE_NONE,
>                       CI_MODE_VIDEO,
>                       CI_MODE_STILL_CAPTURE,
> @@ -2105,13 +2105,8 @@ int atomisp_set_sensor_runmode(struct 
> atomisp_sub_device *asd,
>       c = v4l2_ctrl_find(isp->inputs[asd->input_curr].camera->ctrl_handler,
>                          V4L2_CID_RUN_MODE);
>  
> -     if (c) {
> +     if (c)
>               ret = v4l2_ctrl_s_ctrl(c, runmode->mode);
> -     } else {
> -             p.parm.capture.capturemode = modes[runmode->mode];
> -             ret = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
> -                                    video, s_parm, &p);
> -     }
>  
>       mutex_unlock(asd->ctrl_handler.lock);
>       return ret;
> diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c 
> b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c
> index f3e18d627b0a..b78276ac22da 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c
> @@ -819,12 +819,6 @@ static int __atomisp_update_run_mode(struct 
> atomisp_sub_device *asd)
>       struct atomisp_device *isp = asd->isp;
>       struct v4l2_ctrl *ctrl = asd->run_mode;
>       struct v4l2_ctrl *c;
> -     struct v4l2_streamparm p = {0};
> -     int modes[] = { CI_MODE_NONE,
> -                     CI_MODE_VIDEO,
> -                     CI_MODE_STILL_CAPTURE,
> -                     CI_MODE_CONTINUOUS,
> -                     CI_MODE_PREVIEW };
>       s32 mode;
>  
>       if (ctrl->val != ATOMISP_RUN_MODE_VIDEO &&
> @@ -840,11 +834,7 @@ static int __atomisp_update_run_mode(struct 
> atomisp_sub_device *asd)
>       if (c)
>               return v4l2_ctrl_s_ctrl(c, mode);
>  
> -     /* Fall back to obsolete s_parm */
> -     p.parm.capture.capturemode = modes[mode];
> -
> -     return v4l2_subdev_call(
> -             isp->inputs[asd->input_curr].camera, video, s_parm, &p);
> +     return 0;
>  }
>  
>  int atomisp_update_run_mode(struct atomisp_sub_device *asd)



Thanks,
Mauro

Reply via email to