On Fri, Mar 9, 2018 at 7:46 PM, Yeh, Andy <andy....@intel.com> wrote: > Hi Tomasz, > > My apology. Actually I obsoleted this [V8] > https://patchwork.linuxtv.org/patch/47768/ just after submitted. > Since I found few comments as what you pointed below were not addressed yet. > Didn’t expect you to check this. I shall send an email to notify you two the > obsolete state as well. > > We are working on addressing all those outstanding comments. Almost done. > Will do reply v6 with OKAY, and send to list a new v7 with all fixed. >
Thank you. Looking forward to next version then! (By the way, I still think that replying to review comments, even with a simple "Okay" is a good practice. :)) Best regards, Tomasz > > Regards, Andy > > -----Original Message----- > From: Tomasz Figa [mailto:tf...@chromium.org] > Sent: Friday, March 9, 2018 6:20 PM > To: Sakari Ailus <sakari.ai...@linux.intel.com> > Cc: Yeh, Andy <andy....@intel.com>; Linux Media Mailing List > <linux-media@vger.kernel.org>; Chen, JasonX Z <jasonx.z.c...@intel.com>; > Chiang, AlanX <alanx.chi...@intel.com> > Subject: Re: [PATCH v8] media: imx258: Add imx258 camera sensor driver > > Hi Andy, Sakari, > > On Fri, Mar 9, 2018 at 5:54 PM, Sakari Ailus <sakari.ai...@linux.intel.com> > wrote: >> Hi Andy, >> >> Thanks for the update. Please see my comments below. >> >> On Fri, Mar 09, 2018 at 12:15:54AM +0800, Andy Yeh wrote: >>> Add a V4L2 sub-device driver for the Sony IMX258 image sensor. >>> This is a camera sensor using the I2C bus for control and the >>> CSI-2 bus for data. >>> >>> Signed-off-by: Jason Chen <jasonx.z.c...@intel.com> >>> Signed-off-by: Alan Chiang <alanx.chi...@intel.com> >>> --- >>> since v2: >>> -- Update the streaming function to remove SW_STANDBY in the beginning. >>> -- Adjust the delay time from 1ms to 12ms before set stream-on register. >>> since v3: >>> -- fix the sd.entity to make code be compiled on the mainline kernel. >>> since v4: >>> -- Enabled AG, DG, and Exposure time control correctly. >>> since v5: >>> -- Sensor vendor provided a new setting to fix different CLK issue >>> -- Add one more resolution for 1048x780, used for VGA streaming since >>> v6: >>> -- improve i2c write function to support writing 2 registers >>> -- Not Orring ret in update_digital_gain which lead to unintended >>> error since v7: >>> -- modified imx258_reg read / write function with a more portable way >>> -- arranged some format per suggestions >>> >>> >>> MAINTAINERS | 7 + >>> drivers/media/i2c/Kconfig | 11 + >>> drivers/media/i2c/Makefile | 1 + >>> drivers/media/i2c/imx258.c | 1324 >>> ++++++++++++++++++++++++++++++++++++++++++++ >>> 4 files changed, 1343 insertions(+) >>> create mode 100644 drivers/media/i2c/imx258.c >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS index a339bb5..9f75510 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -12646,6 +12646,13 @@ S: Maintained >>> F: drivers/ssb/ >>> F: include/linux/ssb/ >>> >>> +SONY IMX258 SENSOR DRIVER >>> +M: Sakari Ailus <sakari.ai...@linux.intel.com> >>> +L: linux-media@vger.kernel.org >>> +T: git git://linuxtv.org/media_tree.git >>> +S: Maintained >>> +F: drivers/media/i2c/imx258.c >>> + >>> SONY IMX274 SENSOR DRIVER >>> M: Leon Luo <le...@leopardimaging.com> >>> L: linux-media@vger.kernel.org >>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig >>> index fd01842..bcd4bf1 100644 >>> --- a/drivers/media/i2c/Kconfig >>> +++ b/drivers/media/i2c/Kconfig >>> @@ -565,6 +565,17 @@ config VIDEO_APTINA_PLL config VIDEO_SMIAPP_PLL >>> tristate >>> >>> +config VIDEO_IMX258 >>> + tristate "Sony IMX258 sensor support" >>> + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API >>> + depends on MEDIA_CAMERA_SUPPORT >>> + ---help--- >>> + This is a Video4Linux2 sensor-level driver for the Sony >>> + IMX258 camera. >>> + >>> + To compile this driver as a module, choose M here: the >>> + module will be called imx258. >>> + >>> config VIDEO_IMX274 >>> tristate "Sony IMX274 sensor support" >>> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API diff >>> --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index >>> 1b62639..4bf7d00 100644 >>> --- a/drivers/media/i2c/Makefile >>> +++ b/drivers/media/i2c/Makefile >>> @@ -94,6 +94,7 @@ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o >>> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o >>> obj-$(CONFIG_VIDEO_OV2659) += ov2659.o >>> obj-$(CONFIG_VIDEO_TC358743) += tc358743.o >>> +obj-$(CONFIG_VIDEO_IMX258) += imx258.o >>> obj-$(CONFIG_VIDEO_IMX274) += imx274.o >>> >>> obj-$(CONFIG_SDR_MAX2175) += max2175.o diff --git >>> a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c new file >>> mode 100644 index 0000000..814520f >>> --- /dev/null >>> +++ b/drivers/media/i2c/imx258.c >>> @@ -0,0 +1,1324 @@ >>> +// Copyright (C) 2018 Intel Corporation // SPDX-License-Identifier: >>> +GPL-2.0 >>> + >>> +#include <linux/acpi.h> >>> +#include <linux/delay.h> >>> +#include <linux/i2c.h> >>> +#include <linux/module.h> >>> +#include <linux/pm_runtime.h> >>> +#include <media/v4l2-ctrls.h> >>> +#include <media/v4l2-device.h> >>> +#include <asm/unaligned.h> >>> + >>> +#define IMX258_REG_VALUE_08BIT 1 >>> +#define IMX258_REG_VALUE_16BIT 2 >>> +#define IMX258_REG_VALUE_24BIT 3 >> >> The last one is not used. Perhaps because the sensor does not have any >> 24-bit registers? :-) How about removing it? > > I pointed in my earlier review comments that we don't even need these macros > anymore. They add as much value as defining ONE = 1 and TWO = 2. > > Andy, this is already a second re-spin of this patch, where my previous > comments are left unaddressed. > >> >>> + >>> +#define IMX258_REG_MODE_SELECT 0x0100 >>> +#define IMX258_MODE_STANDBY 0x00 >>> +#define IMX258_MODE_STREAMING 0x01 >>> + >>> +/* Chip ID */ >>> +#define IMX258_REG_CHIP_ID 0x0016 >>> +#define IMX258_CHIP_ID 0x0258 >>> + >>> +/* V_TIMING internal */ >>> +#define IMX258_REG_VTS 0x0340 >>> +#define IMX258_VTS_30FPS 0x0c98 >>> +#define IMX258_VTS_MAX 0xffff >>> + >>> +/*Frame Length Line*/ >>> +#define IMX258_FLL_MIN 0x08a6 >>> +#define IMX258_FLL_MAX 0xffff >>> +#define IMX258_FLL_STEP 1 >>> +#define IMX258_FLL_DEFAULT 0x0c98 >>> + >>> +/* HBLANK control - read only */ >>> +#define IMX258_PPL_DEFAULT 5352 >>> + >>> +/* Exposure control */ >>> +#define IMX258_REG_EXPOSURE 0x0202 >>> +#define IMX258_EXPOSURE_MIN 4 >>> +#define IMX258_EXPOSURE_STEP 1 >>> +#define IMX258_EXPOSURE_DEFAULT 0x640 >>> +#define IMX258_EXPOSURE_MAX 65535 >>> + >>> +/* Analog gain control */ >>> +#define IMX258_REG_ANALOG_GAIN 0x0204 >>> +#define IMX258_ANA_GAIN_MIN 0 >>> +#define IMX258_ANA_GAIN_MAX 0x1fff >>> +#define IMX258_ANA_GAIN_STEP 1 >>> +#define IMX258_ANA_GAIN_DEFAULT 0x0 >>> + >>> +/* Digital gain control */ >>> +#define IMX258_REG_GR_DIGITAL_GAIN 0x020e >>> +#define IMX258_REG_R_DIGITAL_GAIN 0x0210 >>> +#define IMX258_REG_B_DIGITAL_GAIN 0x0212 >>> +#define IMX258_REG_GB_DIGITAL_GAIN 0x0214 >>> +#define IMX258_DGTL_GAIN_MIN 0 >>> +#define IMX258_DGTL_GAIN_MAX 4096 /* Max = 0xFFF */ >>> +#define IMX258_DGTL_GAIN_DEFAULT 1024 >>> +#define IMX258_DGTL_GAIN_STEP 1 >>> + >>> +/* Orientation */ >>> +#define REG_MIRROR_FLIP_CONTROL 0x0101 >>> +#define REG_CONFIG_MIRROR_FLIP 0x03 >>> + >>> +struct imx258_reg { >>> + u16 address; >>> + u8 val; >>> +}; >>> + >>> +struct imx258_reg_list { >>> + u32 num_of_regs; >>> + const struct imx258_reg *regs; >>> +}; >>> + >>> +/* Link frequency config */ >>> +struct imx258_link_freq_config { >>> + u32 pixels_per_line; >>> + >>> + /* PLL registers for this link frequency */ >>> + struct imx258_reg_list reg_list; }; >>> + >>> +/* Mode : resolution and related config&values */ struct imx258_mode >>> +{ >>> + /* Frame width */ >>> + u32 width; >>> + /* Frame height */ >>> + u32 height; >>> + >>> + /* V-timing */ >>> + u32 vts_def; >>> + u32 vts_min; >>> + >>> + /* Index of Link frequency config to be used */ >>> + u32 link_freq_index; >>> + /* Default register values */ >>> + struct imx258_reg_list reg_list; }; >>> + >>> +/* 4208x3118 needs 1267Mbps/lane, 4 lanes */ static const struct >>> +imx258_reg mipi_data_rate_1267mbps[] = { >>> + { 0x0301, 0x05}, >> >> If you have a space after the opening brace (which I'd recommend), you >> should have one before the closing one as well. >> >>> + { 0x0303, 0x02}, >>> + { 0x0305, 0x03}, >>> + { 0x0306, 0x00}, >>> + { 0x0307, 0xC6}, >>> + { 0x0309, 0x0A}, >>> + { 0x030B, 0x01}, >>> + { 0x030D, 0x02}, >>> + { 0x030E, 0x00}, >>> + { 0x030F, 0xD8}, >>> + { 0x0310, 0x00}, >>> + { 0x0820, 0x13}, >>> + { 0x0821, 0x4C}, >>> + { 0x0822, 0xCC}, >>> + { 0x0823, 0xCC}, >>> +}; >>> + >>> +static const struct imx258_reg mipi_data_rate_640mbps[] = { >>> + { 0x0301, 0x05}, >>> + { 0x0303, 0x02}, >>> + { 0x0305, 0x03}, >>> + { 0x0306, 0x00}, >>> + { 0x0307, 0x64}, >>> + { 0x0309, 0x0A}, >>> + { 0x030B, 0x01}, >>> + { 0x030D, 0x02}, >>> + { 0x030E, 0x00}, >>> + { 0x030F, 0xD8}, >>> + { 0x0310, 0x00}, >>> + { 0x0820, 0x0A}, >>> + { 0x0821, 0x00}, >>> + { 0x0822, 0x00}, >>> + { 0x0823, 0x00}, >>> +}; >>> + >>> +static const struct imx258_reg mode_4208x3118_regs[] = { >>> + { 0x0136, 0x13}, >>> + { 0x0137, 0x33}, >>> + { 0x3051, 0x00}, >>> + { 0x3052, 0x00}, >>> + { 0x4E21, 0x14}, >>> + { 0x6B11, 0xCF}, >>> + { 0x7FF0, 0x08}, >>> + { 0x7FF1, 0x0F}, >>> + { 0x7FF2, 0x08}, >>> + { 0x7FF3, 0x1B}, >>> + { 0x7FF4, 0x23}, >>> + { 0x7FF5, 0x60}, >>> + { 0x7FF6, 0x00}, >>> + { 0x7FF7, 0x01}, >>> + { 0x7FF8, 0x00}, >>> + { 0x7FF9, 0x78}, >>> + { 0x7FFA, 0x00}, >>> + { 0x7FFB, 0x00}, >>> + { 0x7FFC, 0x00}, >>> + { 0x7FFD, 0x00}, >>> + { 0x7FFE, 0x00}, >>> + { 0x7FFF, 0x03}, >>> + { 0x7F76, 0x03}, >>> + { 0x7F77, 0xFE}, >>> + { 0x7FA8, 0x03}, >>> + { 0x7FA9, 0xFE}, >>> + { 0x7B24, 0x81}, >>> + { 0x7B25, 0x00}, >>> + { 0x6564, 0x07}, >>> + { 0x6B0D, 0x41}, >>> + { 0x653D, 0x04}, >>> + { 0x6B05, 0x8C}, >>> + { 0x6B06, 0xF9}, >>> + { 0x6B08, 0x65}, >>> + { 0x6B09, 0xFC}, >>> + { 0x6B0A, 0xCF}, >>> + { 0x6B0B, 0xD2}, >>> + { 0x6700, 0x0E}, >>> + { 0x6707, 0x0E}, >>> + { 0x9104, 0x00}, >>> + { 0x4648, 0x7F}, >>> + { 0x7420, 0x00}, >>> + { 0x7421, 0x1C}, >>> + { 0x7422, 0x00}, >>> + { 0x7423, 0xD7}, >>> + { 0x5F04, 0x00}, >>> + { 0x5F05, 0xED}, >>> + { 0x0112, 0x0A}, >>> + { 0x0113, 0x0A}, >>> + { 0x0114, 0x03}, >>> + { 0x0342, 0x14}, >>> + { 0x0343, 0xE8}, >>> + { 0x0340, 0x0C}, >>> + { 0x0341, 0x50}, >>> + { 0x0344, 0x00}, >>> + { 0x0345, 0x00}, >>> + { 0x0346, 0x00}, >>> + { 0x0347, 0x00}, >>> + { 0x0348, 0x10}, >>> + { 0x0349, 0x6F}, >>> + { 0x034A, 0x0C}, >>> + { 0x034B, 0x2E}, >>> + { 0x0381, 0x01}, >>> + { 0x0383, 0x01}, >>> + { 0x0385, 0x01}, >>> + { 0x0387, 0x01}, >>> + { 0x0900, 0x00}, >>> + { 0x0901, 0x11}, >>> + { 0x0401, 0x00}, >>> + { 0x0404, 0x00}, >>> + { 0x0405, 0x10}, >>> + { 0x0408, 0x00}, >>> + { 0x0409, 0x00}, >>> + { 0x040A, 0x00}, >>> + { 0x040B, 0x00}, >>> + { 0x040C, 0x10}, >>> + { 0x040D, 0x70}, >>> + { 0x040E, 0x0C}, >>> + { 0x040F, 0x30}, >>> + { 0x3038, 0x00}, >>> + { 0x303A, 0x00}, >>> + { 0x303B, 0x10}, >>> + { 0x300D, 0x00}, >>> + { 0x034C, 0x10}, >>> + { 0x034D, 0x70}, >>> + { 0x034E, 0x0C}, >>> + { 0x034F, 0x30}, >>> + { 0x0202, 0x0C}, >>> + { 0x0203, 0x46}, >>> + { 0x0204, 0x00}, >>> + { 0x0205, 0x00}, >>> + { 0x020E, 0x01}, >>> + { 0x020F, 0x00}, >>> + { 0x0210, 0x01}, >>> + { 0x0211, 0x00}, >>> + { 0x0212, 0x01}, >>> + { 0x0213, 0x00}, >>> + { 0x0214, 0x01}, >>> + { 0x0215, 0x00}, >>> + { 0x7BCD, 0x00}, >>> + { 0x94DC, 0x20}, >>> + { 0x94DD, 0x20}, >>> + { 0x94DE, 0x20}, >>> + { 0x95DC, 0x20}, >>> + { 0x95DD, 0x20}, >>> + { 0x95DE, 0x20}, >>> + { 0x7FB0, 0x00}, >>> + { 0x9010, 0x3E}, >>> + { 0x9419, 0x50}, >>> + { 0x941B, 0x50}, >>> + { 0x9519, 0x50}, >>> + { 0x951B, 0x50}, >>> + { 0x3030, 0x00}, >>> + { 0x3032, 0x00}, >>> + { 0x0220, 0x00}, >>> +}; >>> + >>> +static const struct imx258_reg mode_2104_1560_regs[] = { >>> + { 0x0136, 0x13}, >>> + { 0x0137, 0x33}, >>> + { 0x3051, 0x00}, >>> + { 0x3052, 0x00}, >>> + { 0x4E21, 0x14}, >>> + { 0x6B11, 0xCF}, >>> + { 0x7FF0, 0x08}, >>> + { 0x7FF1, 0x0F}, >>> + { 0x7FF2, 0x08}, >>> + { 0x7FF3, 0x1B}, >>> + { 0x7FF4, 0x23}, >>> + { 0x7FF5, 0x60}, >>> + { 0x7FF6, 0x00}, >>> + { 0x7FF7, 0x01}, >>> + { 0x7FF8, 0x00}, >>> + { 0x7FF9, 0x78}, >>> + { 0x7FFA, 0x00}, >>> + { 0x7FFB, 0x00}, >>> + { 0x7FFC, 0x00}, >>> + { 0x7FFD, 0x00}, >>> + { 0x7FFE, 0x00}, >>> + { 0x7FFF, 0x03}, >>> + { 0x7F76, 0x03}, >>> + { 0x7F77, 0xFE}, >>> + { 0x7FA8, 0x03}, >>> + { 0x7FA9, 0xFE}, >>> + { 0x7B24, 0x81}, >>> + { 0x7B25, 0x00}, >>> + { 0x6564, 0x07}, >>> + { 0x6B0D, 0x41}, >>> + { 0x653D, 0x04}, >>> + { 0x6B05, 0x8C}, >>> + { 0x6B06, 0xF9}, >>> + { 0x6B08, 0x65}, >>> + { 0x6B09, 0xFC}, >>> + { 0x6B0A, 0xCF}, >>> + { 0x6B0B, 0xD2}, >>> + { 0x6700, 0x0E}, >>> + { 0x6707, 0x0E}, >>> + { 0x9104, 0x00}, >>> + { 0x4648, 0x7F}, >>> + { 0x7420, 0x00}, >>> + { 0x7421, 0x1C}, >>> + { 0x7422, 0x00}, >>> + { 0x7423, 0xD7}, >>> + { 0x5F04, 0x00}, >>> + { 0x5F05, 0xED}, >>> + { 0x0112, 0x0A}, >>> + { 0x0113, 0x0A}, >>> + { 0x0114, 0x03}, >>> + { 0x0342, 0x14}, >>> + { 0x0343, 0xE8}, >>> + { 0x0340, 0x06}, >>> + { 0x0341, 0x38}, >>> + { 0x0344, 0x00}, >>> + { 0x0345, 0x00}, >>> + { 0x0346, 0x00}, >>> + { 0x0347, 0x00}, >>> + { 0x0348, 0x10}, >>> + { 0x0349, 0x6F}, >>> + { 0x034A, 0x0C}, >>> + { 0x034B, 0x2E}, >>> + { 0x0381, 0x01}, >>> + { 0x0383, 0x01}, >>> + { 0x0385, 0x01}, >>> + { 0x0387, 0x01}, >>> + { 0x0900, 0x01}, >>> + { 0x0901, 0x12}, >>> + { 0x0401, 0x01}, >>> + { 0x0404, 0x00}, >>> + { 0x0405, 0x20}, >>> + { 0x0408, 0x00}, >>> + { 0x0409, 0x02}, >>> + { 0x040A, 0x00}, >>> + { 0x040B, 0x00}, >>> + { 0x040C, 0x10}, >>> + { 0x040D, 0x6A}, >>> + { 0x040E, 0x06}, >>> + { 0x040F, 0x18}, >>> + { 0x3038, 0x00}, >>> + { 0x303A, 0x00}, >>> + { 0x303B, 0x10}, >>> + { 0x300D, 0x00}, >>> + { 0x034C, 0x08}, >>> + { 0x034D, 0x38}, >>> + { 0x034E, 0x06}, >>> + { 0x034F, 0x18}, >>> + { 0x0202, 0x06}, >>> + { 0x0203, 0x2E}, >>> + { 0x0204, 0x00}, >>> + { 0x0205, 0x00}, >>> + { 0x020E, 0x01}, >>> + { 0x020F, 0x00}, >>> + { 0x0210, 0x01}, >>> + { 0x0211, 0x00}, >>> + { 0x0212, 0x01}, >>> + { 0x0213, 0x00}, >>> + { 0x0214, 0x01}, >>> + { 0x0215, 0x00}, >>> + { 0x7BCD, 0x01}, >>> + { 0x94DC, 0x20}, >>> + { 0x94DD, 0x20}, >>> + { 0x94DE, 0x20}, >>> + { 0x95DC, 0x20}, >>> + { 0x95DD, 0x20}, >>> + { 0x95DE, 0x20}, >>> + { 0x7FB0, 0x00}, >>> + { 0x9010, 0x3E}, >>> + { 0x9419, 0x50}, >>> + { 0x941B, 0x50}, >>> + { 0x9519, 0x50}, >>> + { 0x951B, 0x50}, >>> + { 0x3030, 0x00}, >>> + { 0x3032, 0x00}, >>> + { 0x0220, 0x00}, >>> +}; >>> + >>> +static const struct imx258_reg mode_1048_780_regs[] = { >>> + { 0x0136, 0x13}, >>> + { 0x0137, 0x33}, >>> + { 0x3051, 0x00}, >>> + { 0x3052, 0x00}, >>> + { 0x4E21, 0x14}, >>> + { 0x6B11, 0xCF}, >>> + { 0x7FF0, 0x08}, >>> + { 0x7FF1, 0x0F}, >>> + { 0x7FF2, 0x08}, >>> + { 0x7FF3, 0x1B}, >>> + { 0x7FF4, 0x23}, >>> + { 0x7FF5, 0x60}, >>> + { 0x7FF6, 0x00}, >>> + { 0x7FF7, 0x01}, >>> + { 0x7FF8, 0x00}, >>> + { 0x7FF9, 0x78}, >>> + { 0x7FFA, 0x00}, >>> + { 0x7FFB, 0x00}, >>> + { 0x7FFC, 0x00}, >>> + { 0x7FFD, 0x00}, >>> + { 0x7FFE, 0x00}, >>> + { 0x7FFF, 0x03}, >>> + { 0x7F76, 0x03}, >>> + { 0x7F77, 0xFE}, >>> + { 0x7FA8, 0x03}, >>> + { 0x7FA9, 0xFE}, >>> + { 0x7B24, 0x81}, >>> + { 0x7B25, 0x00}, >>> + { 0x6564, 0x07}, >>> + { 0x6B0D, 0x41}, >>> + { 0x653D, 0x04}, >>> + { 0x6B05, 0x8C}, >>> + { 0x6B06, 0xF9}, >>> + { 0x6B08, 0x65}, >>> + { 0x6B09, 0xFC}, >>> + { 0x6B0A, 0xCF}, >>> + { 0x6B0B, 0xD2}, >>> + { 0x6700, 0x0E}, >>> + { 0x6707, 0x0E}, >>> + { 0x9104, 0x00}, >>> + { 0x4648, 0x7F}, >>> + { 0x7420, 0x00}, >>> + { 0x7421, 0x1C}, >>> + { 0x7422, 0x00}, >>> + { 0x7423, 0xD7}, >>> + { 0x5F04, 0x00}, >>> + { 0x5F05, 0xED}, >>> + { 0x0112, 0x0A}, >>> + { 0x0113, 0x0A}, >>> + { 0x0114, 0x03}, >>> + { 0x0342, 0x14}, >>> + { 0x0343, 0xE8}, >>> + { 0x0340, 0x03}, >>> + { 0x0341, 0x4C}, >>> + { 0x0344, 0x00}, >>> + { 0x0345, 0x00}, >>> + { 0x0346, 0x00}, >>> + { 0x0347, 0x00}, >>> + { 0x0348, 0x10}, >>> + { 0x0349, 0x6F}, >>> + { 0x034A, 0x0C}, >>> + { 0x034B, 0x2E}, >>> + { 0x0381, 0x01}, >>> + { 0x0383, 0x01}, >>> + { 0x0385, 0x01}, >>> + { 0x0387, 0x01}, >>> + { 0x0900, 0x01}, >>> + { 0x0901, 0x14}, >>> + { 0x0401, 0x01}, >>> + { 0x0404, 0x00}, >>> + { 0x0405, 0x40}, >>> + { 0x0408, 0x00}, >>> + { 0x0409, 0x06}, >>> + { 0x040A, 0x00}, >>> + { 0x040B, 0x00}, >>> + { 0x040C, 0x10}, >>> + { 0x040D, 0x64}, >>> + { 0x040E, 0x03}, >>> + { 0x040F, 0x0C}, >>> + { 0x3038, 0x00}, >>> + { 0x303A, 0x00}, >>> + { 0x303B, 0x10}, >>> + { 0x300D, 0x00}, >>> + { 0x034C, 0x04}, >>> + { 0x034D, 0x18}, >>> + { 0x034E, 0x03}, >>> + { 0x034F, 0x0C}, >>> + { 0x0202, 0x03}, >>> + { 0x0203, 0x42}, >>> + { 0x0204, 0x00}, >>> + { 0x0205, 0x00}, >>> + { 0x020E, 0x01}, >>> + { 0x020F, 0x00}, >>> + { 0x0210, 0x01}, >>> + { 0x0211, 0x00}, >>> + { 0x0212, 0x01}, >>> + { 0x0213, 0x00}, >>> + { 0x0214, 0x01}, >>> + { 0x0215, 0x00}, >>> + { 0x7BCD, 0x00}, >>> + { 0x94DC, 0x20}, >>> + { 0x94DD, 0x20}, >>> + { 0x94DE, 0x20}, >>> + { 0x95DC, 0x20}, >>> + { 0x95DD, 0x20}, >>> + { 0x95DE, 0x20}, >>> + { 0x7FB0, 0x00}, >>> + { 0x9010, 0x3E}, >>> + { 0x9419, 0x50}, >>> + { 0x941B, 0x50}, >>> + { 0x9519, 0x50}, >>> + { 0x951B, 0x50}, >>> + { 0x3030, 0x00}, >>> + { 0x3032, 0x00}, >>> + { 0x0220, 0x00}, >>> +}; >>> + >>> +static const char * const imx258_test_pattern_menu[] = { >>> + "Disabled", >>> + "Vertical Color Bar Type 1", >>> + "Vertical Color Bar Type 2", >>> + "Vertical Color Bar Type 3", >>> + "Vertical Color Bar Type 4" >>> +}; >>> + >>> +/* Configurations for supported link frequencies */ >>> +#define IMX258_LINK_FREQ_634MHZ 633600000ULL >>> +#define IMX258_LINK_FREQ_320MHZ 320000000ULL >>> + >>> +/* >>> + * pixel_rate = link_freq * data-rate * nr_of_lanes / >>> +bits_per_sample >>> + * data rate => double data rate; number of lanes => 4; bits per >>> +pixel => 10 */ static u64 link_freq_to_pixel_rate(u64 f) { >>> + f *= 2 * 4; >>> + do_div(f, 10); >>> + >>> + return f; >>> +} >>> + >>> +/* Menu items for LINK_FREQ V4L2 control */ static const s64 >>> +link_freq_menu_items[] = { >>> + IMX258_LINK_FREQ_634MHZ, >>> + IMX258_LINK_FREQ_320MHZ, >>> +}; >>> + >>> +/* Link frequency configs */ >>> +static const struct imx258_link_freq_config link_freq_configs[] = { >>> + { >>> + .pixels_per_line = IMX258_PPL_DEFAULT, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps), >>> + .regs = mipi_data_rate_1267mbps, >>> + } >>> + }, >>> + { >>> + .pixels_per_line = IMX258_PPL_DEFAULT, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps), >>> + .regs = mipi_data_rate_640mbps, >>> + } >>> + }, >>> +}; > > I also had comments for using explicit indices in this array, to avoid > mistakes in supported_modes[] below. > >>> + >>> +/* Mode configs */ >>> +static const struct imx258_mode supported_modes[] = { >>> + { >>> + .width = 4208, >>> + .height = 3118, >>> + .vts_def = IMX258_VTS_30FPS, >>> + .vts_min = IMX258_VTS_30FPS, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mode_4208x3118_regs), >>> + .regs = mode_4208x3118_regs, >>> + }, >>> + .link_freq_index = 0, >>> + }, >>> + { >>> + .width = 2104, >>> + .height = 1560, >>> + .vts_def = IMX258_VTS_30FPS, >>> + .vts_min = 1608, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mode_2104_1560_regs), >>> + .regs = mode_2104_1560_regs, >>> + }, >>> + .link_freq_index = 1, >>> + }, >>> + { >>> + .width = 1048, >>> + .height = 780, >>> + .vts_def = IMX258_VTS_30FPS, >>> + .vts_min = 804, >>> + .reg_list = { >>> + .num_of_regs = ARRAY_SIZE(mode_1048_780_regs), >>> + .regs = mode_1048_780_regs, >>> + }, >>> + .link_freq_index = 1, >>> + }, >>> +}; >>> + >>> +struct imx258 { >>> + struct v4l2_subdev sd; >>> + struct media_pad pad; >>> + >>> + struct v4l2_ctrl_handler ctrl_handler; >>> + /* V4L2 Controls */ >>> + struct v4l2_ctrl *link_freq; >>> + struct v4l2_ctrl *pixel_rate; >>> + struct v4l2_ctrl *vblank; >>> + struct v4l2_ctrl *hblank; >>> + struct v4l2_ctrl *exposure; >>> + >>> + /* Current mode */ >>> + const struct imx258_mode *cur_mode; >>> + >>> + /* Mutex for serialized access */ >>> + struct mutex mutex; >>> + /* >>> + * Protect sensor module set pad format and start streaming normally. >>> + */ >>> + >>> + /* Streaming on/off */ >>> + bool streaming; >>> +}; >>> + >>> +#define to_imx258(_sd) container_of(_sd, struct imx258, sd) >>> + >>> +/* Read registers up to 2 at a time */ static int >>> +imx258_read_reg(struct imx258 *imx258, u16 reg, u32 len, u32 *val) { >>> + struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd); >>> + struct i2c_msg msgs[2]; >>> + u8 addr_buf[2] = { reg >> 8, reg & 0xff }; >>> + u8 data_buf[4] = { 0, }; >>> + int ret; >>> + >>> + if (len > 4) >>> + return -EINVAL; >>> + >>> + /* Write register address */ >>> + msgs[0].addr = client->addr; >>> + msgs[0].flags = 0; >>> + msgs[0].len = ARRAY_SIZE(addr_buf); >>> + msgs[0].buf = addr_buf; >>> + >>> + /* Read data from register */ >>> + msgs[1].addr = client->addr; >>> + msgs[1].flags = I2C_M_RD; >>> + msgs[1].len = len; >>> + msgs[1].buf = &data_buf[4 - len]; >>> + >>> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); >>> + if (ret != ARRAY_SIZE(msgs)) >>> + return -EIO; >>> + >>> + *val = get_unaligned_be32(data_buf); >>> + >>> + return 0; >>> +} >>> + >>> +/* Write registers up to 2 at a time */ static int >>> +imx258_write_reg(struct imx258 *imx258, u16 reg, u32 len, u32 val) { >>> + struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd); >>> + u8 __buf[6], *buf = __buf; >>> + >>> + if (len > 4) >>> + return -EINVAL; >>> + >>> + *buf++ = reg >> 8; >>> + *buf++ = reg & 0xff; >> >> You assign reg in variable declaration in imx258_read_reg(). Could you >> do the same here? Or even better, use put_unaligned_be16(). >> >> I wasn't aware of these functions, thanks for introducing them to me. >> :-) >> >> You can then remove buf and rename __buf as buf. > > I believe I gave an exact implementation, without that problem, in my > previous comments actually. > > Andy, please, really please, go through all the comments in my reply to v6 on > the list and make sure that they are all addressed. Perhaps reply to it, with > "Okay" next to each comment, to make sure some of the message was not lost > due to some weird mail client settings. > > Best regards, > Tomasz
