Hi Chris,
On Tue, 2018-04-03 at 14:50 -0500, Chris Lesiak wrote:
> Propagate the v4l2_mbus_framefmt to the source pad when either a sink
> pad is activated or when the format of the active sink pad changes.
Thank you, this fixes the V4L2_SUBDEV_FORMAT_TRY use case as well as
propagation of the active format when the user calls VIDIOC_SUBDEV_S_FMT
on the sink pad and then only VIDIOC_SUBDEV_G_FMT on the source pad.
> Signed-off-by: Chris Lesiak <chris.les...@licor.com>
> ---
> drivers/media/platform/video-mux.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/video-mux.c
> b/drivers/media/platform/video-mux.c
> index ee89ad76bee2..1fb887293337 100644
> --- a/drivers/media/platform/video-mux.c
> +++ b/drivers/media/platform/video-mux.c
> @@ -45,6 +45,7 @@ static int video_mux_link_setup(struct media_entity *entity,
> {
> struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> + u16 source_pad = entity->num_pads - 1;
> int ret = 0;
>
> /*
> @@ -74,6 +75,9 @@ static int video_mux_link_setup(struct media_entity *entity,
> if (ret < 0)
> goto out;
> vmux->active = local->index;
> +
> + /* Propagate the active format to the source */
> + vmux->format_mbus[source_pad] = vmux->format_mbus[vmux->active];
> } else {
> if (vmux->active != local->index)
> goto out;
> @@ -162,14 +166,20 @@ static int video_mux_set_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *sdformat)
> {
> struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> - struct v4l2_mbus_framefmt *mbusformat;
> + struct v4l2_mbus_framefmt *mbusformat, *source_mbusformat;
> struct media_pad *pad = &vmux->pads[sdformat->pad];
> + u16 source_pad = sd->entity.num_pads - 1;
>
> mbusformat = __video_mux_get_pad_format(sd, cfg, sdformat->pad,
> sdformat->which);
> if (!mbusformat)
> return -EINVAL;
>
> + source_mbusformat = __video_mux_get_pad_format(sd, cfg, source_pad,
> + sdformat->which);
> + if (!source_mbusformat)
> + return -EINVAL;
> +
> mutex_lock(&vmux->lock);
This is superfluous if pad->index != vmux->active and the same as
mbusformat for the source pad, but I think to achieve easily readable
code, this is ok.
> /* Source pad mirrors active sink pad, no limitations on sink pads */
> @@ -178,6 +188,10 @@ static int video_mux_set_format(struct v4l2_subdev *sd,
>
> *mbusformat = sdformat->format;
>
> + /* Propagate the format from an active sink to source */
> + if ((pad->flags & MEDIA_PAD_FL_SINK) && (pad->index == vmux->active))
The flags check could be removed. It is not necessary since vmux->active
is never set to the source pad index.
> + *source_mbusformat = sdformat->format;
> +
> mutex_unlock(&vmux->lock);
>
> return 0;
Reviewed-by: Philipp Zabel <p.za...@pengutronix.de>
regards
Philipp
