On Sun, 2009-11-22 at 03:03 +0200, Igor M. Liplianin wrote: > On 21 ноября 2009 22:41:42 Andy Walls wrote: > > > Matthias Fechner schrieb: > > > > I bought some days ago a Tevii S470 DVB-S2 (PCI-E) card and got it > > > > running with the driver from: > > > > http://mercurial.intuxication.org/hg/s2-liplianin > > > > > > > > But I was not successfull in got the IR receiver working. > > > > It seems that it is not supported yet by the driver. > > > > > > > > Is there maybe some code available to get the IR receiver with evdev > > > > running?
> > If the card is using the built in IR controller in the CX23885, then > > you'll have to wait until I port my CX23888 IR controller changes to > > work with the IR controller in the CX23885. That should be somewhat > > straightforward, but will take time. Then we'll still need you to > > experiment with a patch. > It's cx23885 definitely. > Remote uses NEC codes. > In any case I can test. On Mon, 2009-11-23, Igor M. Liplianin wrote: > Receiver connected to cx23885 IR_RX(pin 106). It is not difficult to > track. Igor, As I make patches for test, perhaps you can help answer some questions which will save some experimentation: 1. Does the remote for the TeVii S470 use the same codes as linux/drivers/media/common/ir-keymaps.c : ir_codes_tevii_nec[] or some other remote code table we have in the kernel? 2. Does the remote for the TeVii S470, like other TeVii remotes, use a standard NEC address of 0x00 (so that Addr'Addr is 0xff00) ? Or does it use another address? 3. When you traced board wiring from the IR receiver to the IR_RX pin on the CX23885, did you notice any external components that might modify the signal? For example, a capacitor that integrates carrier bursts into baseband pulses. Thanks. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html