[PATCH v2 13/15] ARM: dts: imx7s-warp: add ov2680 sensor node

[Rui Miguel Silva]

Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete
the camera data path for this system.

Signed-off-by: Rui Miguel Silva <rui.si...@linaro.org>
---
 arch/arm/boot/dts/imx7s-warp.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 91d06adf7c24..d80e9af768b9 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -218,6 +218,22 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2>;
        status = "okay";
+
+       ov2680: camera@36 {
+               compatible = "ovti,ov2680";
+               reg = <0x36>;
+               clocks = <&osc>;
+               clock-names = "xvclk";
+               powerdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+
+               port {
+                       ov2680_to_mipi: endpoint {
+                               remote-endpoint = <&mipi_from_sensor>;
+                               clock-lanes = <0>;
+                               data-lanes = <1>;
+                       };
+               };
+       };
 };
 
 &i2c4 {
-- 
2.17.0