On Tue, Apr 24, 2018 at 10:40:45PM +0200, Arnd Bergmann wrote:
> No drivers should use virt_to_bus() any more. This converts
> one of the few remaining ones to the DMA mapping interface.
>
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> ---
> drivers/media/pci/zoran/Kconfig | 2 +-
> drivers/media/pci/zoran/zoran.h | 10 +++++--
> drivers/media/pci/zoran/zoran_card.c | 10 +++++--
> drivers/media/pci/zoran/zoran_device.c | 16 +++++-----
> drivers/media/pci/zoran/zoran_driver.c | 54
> +++++++++++++++++++++++++---------
> 5 files changed, 63 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/media/pci/zoran/Kconfig b/drivers/media/pci/zoran/Kconfig
> index 39ec35bd21a5..26f40e124a32 100644
> --- a/drivers/media/pci/zoran/Kconfig
> +++ b/drivers/media/pci/zoran/Kconfig
> @@ -1,6 +1,6 @@
> config VIDEO_ZORAN
> tristate "Zoran ZR36057/36067 Video For Linux"
> - depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS
> + depends on PCI && I2C_ALGOBIT && VIDEO_V4L2
> depends on !ALPHA
> help
> Say Y for support for MJPEG capture cards based on the Zoran
> diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h
> index 9bb3c21aa275..9ff3a9acb60a 100644
> --- a/drivers/media/pci/zoran/zoran.h
> +++ b/drivers/media/pci/zoran/zoran.h
> @@ -183,13 +183,14 @@ struct zoran_buffer {
> struct zoran_sync bs; /* DONE: info to return to application
> */
> union {
> struct {
> - __le32 *frag_tab; /* addresses of frag table */
> - u32 frag_tab_bus; /* same value cached to save
> time in ISR */
> + __le32 *frag_tab; /* DMA addresses of frag table
> */
> + void **frag_virt_tab; /* virtual addresses of frag
> table */
> + dma_addr_t frag_tab_dma;/* same value cached to save
> time in ISR */
> } jpg;
> struct {
> char *fbuffer; /* virtual address of frame
> buffer */
> unsigned long fbuffer_phys;/* physical address of frame
> buffer */
> - unsigned long fbuffer_bus;/* bus address of frame
> buffer */
> + dma_addr_t fbuffer_dma;/* bus address of frame buffer */
> } v4l;
> };
> };
> @@ -221,6 +222,7 @@ struct zoran_fh {
>
> struct zoran_overlay_settings overlay_settings;
> u32 *overlay_mask; /* overlay mask */
> + dma_addr_t overlay_mask_dma;
> enum zoran_lock_activity overlay_active;/* feature currently in use? */
>
> struct zoran_buffer_col buffers; /* buffers' info */
> @@ -307,6 +309,7 @@ struct zoran {
>
> struct zoran_overlay_settings overlay_settings;
> u32 *overlay_mask; /* overlay mask */
> + dma_addr_t overlay_mask_dma;
> enum zoran_lock_activity overlay_active; /* feature currently in
> use? */
>
> wait_queue_head_t v4l_capq;
> @@ -346,6 +349,7 @@ struct zoran {
>
> /* zr36057's code buffer table */
> __le32 *stat_com; /* stat_com[i] is indexed by
> dma_head/tail & BUZ_MASK_STAT_COM */
> + dma_addr_t stat_com_dma;
>
> /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
> int jpg_pend[BUZ_MAX_FRAME];
> diff --git a/drivers/media/pci/zoran/zoran_card.c
> b/drivers/media/pci/zoran/zoran_card.c
> index a6b9ebd20263..dabd8bf77472 100644
> --- a/drivers/media/pci/zoran/zoran_card.c
> +++ b/drivers/media/pci/zoran/zoran_card.c
> @@ -890,6 +890,7 @@ zoran_open_init_params (struct zoran *zr)
> /* User must explicitly set a window */
> zr->overlay_settings.is_set = 0;
> zr->overlay_mask = NULL;
> + zr->overlay_mask_dma = 0;
I don't think this zeroing is required, and given that 0 is a valid
dma address on some platforms is also is rather confusing.:w
>
> mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
> - reg = virt_to_bus(zr->overlay_mask);
> + reg = zr->overlay_mask_dma;
> btwrite(reg, ZR36057_MMTR);
> - reg = virt_to_bus(zr->overlay_mask + mask_line_size);
> + reg = zr->overlay_mask_dma + mask_line_size;
I think this would be easier to read if the reg assignments got
removed, e.g.
btwrite(zr->overlay_mask_dma, ZR36057_MMTR);
btwrite(zr->overlay_mask_dma + mask_line_size, ZR36057_MMBR);
Same in a few other places.
> + virt_tab = (void *)get_zeroed_page(GFP_KERNEL);
> + if (!mem || !virt_tab) {
> dprintk(1,
> KERN_ERR
> "%s: %s - get_zeroed_page (frag_tab) failed for
> buffer %d\n",
> ZR_DEVNAME(zr), __func__, i);
> + kfree(mem);
> + kfree(virt_tab);
> jpg_fbuffer_free(fh);
> return -ENOBUFS;
> }
> fh->buffers.buffer[i].jpg.frag_tab = (__le32 *)mem;
> - fh->buffers.buffer[i].jpg.frag_tab_bus = virt_to_bus(mem);
> + fh->buffers.buffer[i].jpg.frag_virt_tab = virt_tab;
>From a quick look it seems like frag_tab should be a dma_alloc_coherent
allocation, or you would need a lot of cache sync operations.
That probably also means it can use dma_mmap_coherent instead of the
handcrafted remap_pfn_range loop and the PageReserved abuse.
