Hi Jacopo,

Thanks for your patch.

On 2018-05-11 11:59:37 +0200, Jacopo Mondi wrote:
> Add R-Car R8A77995 SoC to the rcar-vin supported ones.
> 
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>

I would move this to be the last patch in the series as a indication 
that capture on R8A77995 is now ready to be used. But for the change 
itself.

Reviewed-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>

> ---
>  drivers/media/platform/rcar-vin/rcar-core.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c 
> b/drivers/media/platform/rcar-vin/rcar-core.c
> index d3072e1..e547ef7 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -985,6 +985,10 @@ static const struct rvin_group_route 
> _rcar_info_r8a77970_routes[] = {
>       { /* Sentinel */ }
>  };
>  
> +static const struct rvin_group_route _rcar_info_r8a77995_routes[] = {
> +     { /* Sentinel */ }
> +};
> +
>  static const struct rvin_info rcar_info_r8a77970 = {
>       .model = RCAR_GEN3,
>       .use_mc = true,
> @@ -993,6 +997,14 @@ static const struct rvin_info rcar_info_r8a77970 = {
>       .routes = _rcar_info_r8a77970_routes,
>  };
>  
> +static const struct rvin_info rcar_info_r8a77995 = {
> +     .model = RCAR_GEN3,
> +     .use_mc = true,
> +     .max_width = 4096,
> +     .max_height = 4096,
> +     .routes = _rcar_info_r8a77995_routes,
> +};
> +
>  static const struct of_device_id rvin_of_id_table[] = {
>       {
>               .compatible = "renesas,vin-r8a7778",
> @@ -1034,6 +1046,10 @@ static const struct of_device_id rvin_of_id_table[] = {
>               .compatible = "renesas,vin-r8a77970",
>               .data = &rcar_info_r8a77970,
>       },
> +     {
> +             .compatible = "renesas,vin-r8a77995",
> +             .data = &rcar_info_r8a77995,
> +     },
>       { /* Sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, rvin_of_id_table);
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund

Reply via email to