On 05/30/2018 11:46 AM, Krzysztof Hałasa wrote:
Steve Longerbeam <slongerb...@gmail.com> writes:
but it should be possible for the user to explicitly request the field
order on CSI output (I can make a patch I guess).
If you think that is the correct behavior, I will remove the override
code. I suppose it makes sense to allow user to select field order even
if that order does not make sense given the input standard. I'm fine
either way, Philipp what is your opinion? I'll go with the popular vote :)
I think it should be up to the user.
Actually, PAL and NTSC aren't valid names in the digital world. Their
meaning ends in the ADV7180 (or equivalent). I don't know if PAL and/or
NTSC specify the field order in the analog frame (meaningful when
someone hooks a camera with progressive sensor and analog, interlaced
output), but the digital YUV422 from ADV to CSI isn't NTSC/PAL anymore.
It's just WxH @ framerate + possible interlacing, sequential fields,
top-bottom or otherwise, etc. The analog standard names could be used
here but just as defaults.
If we were strict (and we don't want to force it), then we should set
NTSC/PAL thing on ADV7180 input, 720x480@29.97i (or 720x576@50i, or
704x... etc) on the input parts of the CSI/IPU (where there are no video
frames yet), and 720x480@29.97i B-T or T-B (or default, or separate
fields - whatever suits the user) on the output from CSI.
I remember the reversed field order was sometimes needed - for example,
PAL DV (the casette camcorder thing) produced B-T frames (same as NTSC),
and to avoid (slight) additional quality loss one had to process it
(up to e.g. .MP4, DVD, and then to HDMI, SCART etc) as B-T.
It wasn't a problem in otherwise-PAL-centric environment.
I tend to agree, I've found conflicting info out there regarding
PAL vs. NTSC field order. And I've never liked having to guess
at input analog standard based on input # lines. I will go ahead
and remove the field order override code.
Steve
