Hi Hans,
On Mon, 2018-06-04 at 18:22 +0200, Hans Verkuil wrote:
> Steve or Philipp,
>
> Can one of you verify the imx-media-fim.c patch?
>
> See the description of the change below:
>
> On 06/04/2018 01:46 PM, Hans Verkuil wrote:
> > From: Hans Verkuil <hans.verk...@cisco.com>
> >
> > Add a 'bool from_other_dev' argument: set to true if the two
> > handlers refer to different devices (e.g. it is true when
> > inheriting controls from a subdev into a main v4l2 bridge
> > driver).
> >
> > This will be used later when implementing support for the
> > request API since we need to skip such controls.
> >
> > TODO: check drivers/staging/media/imx/imx-media-fim.c change.
>
> The basic idea is that while controls for a subdev can be
> added ('inherited') to a handler for a another parent subdev or
> video device, they should be marked as belonging to another device.
>
> This is needed when the Request API is introduced since the request
> should not have two copies of the same control (one belonging to the
> subdev, one inherited by e.g. a video device).
>
> However, I am not sure if I need to use true or false in the.
> imx_media_fim_add_controls() case. Do the controls added here belong
> to the same csi subdev or do they belong to another device?
>
> BTW, with 'belongs to' I mean that that's the device driver that
> implements the s_ctrl() call, i.e. actually sets up the hardware.
The FIM controls are created on the CSI subdev
via imx_media_fim_add_controls and then collected by the connected video
capture device:
$ media-ctl -p
[...]
- entity 53: ipu1_csi0 (3 pads, 4 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev8
[...]
pad2: Source
[fmt:AYUV8_1X32/1920x1080@1/30 field:none colorspace:rec709
xfer:709 ycbcr:709 quantization:lim-range]
-> "ipu1_csi0 capture":0 [ENABLED]
[...]
- entity 57: ipu1_csi0 capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video8
pad0: Sink
<- "ipu1_csi0":2 [ENABLED]
$ v4l2-ctl -d /dev/v4l-subdev8 -l
User Controls
fim_enable 0x00981990 (bool) : default=0 value=0
fim_num_average 0x00981991 (int) : min=1 max=64 step=1
default=8 value=8
fim_tolerance_min 0x00981992 (int) : min=2 max=200 step=1
default=50 value=50
fim_tolerance_max 0x00981993 (int) : min=0 max=500 step=1
default=0 value=0
fim_num_skip 0x00981994 (int) : min=0 max=256 step=1
default=2 value=2
fim_input_capture_edge 0x00981995 (int) : min=0 max=3 step=1
default=0 value=0
fim_input_capture_channel 0x00981996 (int) : min=0 max=1 step=1
default=0 value=0
$ v4l2-ctl -d /dev/video8 -l
User Controls
audio_sampling_rate 0x00981980 (int) : min=0 max=768000 step=1
default=0 value=0 flags=read-only
audio_present 0x00981981 (bool) : default=0 value=0
flags=read-only
fim_enable 0x00981990 (bool) : default=0 value=0
fim_num_average 0x00981991 (int) : min=1 max=64 step=1
default=8 value=8
fim_tolerance_min 0x00981992 (int) : min=2 max=200 step=1
default=50 value=50
fim_tolerance_max 0x00981993 (int) : min=0 max=500 step=1
default=0 value=0
fim_num_skip 0x00981994 (int) : min=0 max=256 step=1
default=2 value=2
fim_input_capture_edge 0x00981995 (int) : min=0 max=3 step=1
default=0 value=0
fim_input_capture_channel 0x00981996 (int) : min=0 max=1 step=1
default=0 value=0
Digital Video Controls
power_present 0x00a00964 (bitmask): max=0x00000001
default=0x00000000 value=0x00000001 flags=read-only
I believe this means your patch is correct, as the controls are created
for the CSI subdev, not inherited from another subdev.
regards
Philipp
> Regards,
>
> Hans
>
> >
> > Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> > Signed-off-by: Alexandre Courbot <acour...@chromium.org>
> > ---
> > drivers/media/dvb-frontends/rtl2832_sdr.c | 5 +-
> > drivers/media/pci/bt8xx/bttv-driver.c | 2 +-
> > drivers/media/pci/cx23885/cx23885-417.c | 2 +-
> > drivers/media/pci/cx88/cx88-blackbird.c | 2 +-
> > drivers/media/pci/cx88/cx88-video.c | 2 +-
> > drivers/media/pci/saa7134/saa7134-empress.c | 4 +-
> > drivers/media/pci/saa7134/saa7134-video.c | 2 +-
> > .../media/platform/exynos4-is/fimc-capture.c | 2 +-
> > drivers/media/platform/rcar-vin/rcar-core.c | 2 +-
> > drivers/media/platform/rcar_drif.c | 2 +-
> > .../media/platform/soc_camera/soc_camera.c | 3 +-
> > drivers/media/platform/vivid/vivid-ctrls.c | 46 +++++++++----------
> > drivers/media/usb/cx231xx/cx231xx-417.c | 2 +-
> > drivers/media/usb/cx231xx/cx231xx-video.c | 4 +-
> > drivers/media/usb/msi2500/msi2500.c | 2 +-
> > drivers/media/usb/tm6000/tm6000-video.c | 2 +-
> > drivers/media/v4l2-core/v4l2-ctrls.c | 11 +++--
> > drivers/media/v4l2-core/v4l2-device.c | 3 +-
> > drivers/staging/media/imx/imx-media-dev.c | 2 +-
> > drivers/staging/media/imx/imx-media-fim.c | 2 +-
> > include/media/v4l2-ctrls.h | 8 +++-
> > 21 files changed, 61 insertions(+), 49 deletions(-)
> >
>
> <snip>
>
> > diff --git a/drivers/staging/media/imx/imx-media-dev.c
> > b/drivers/staging/media/imx/imx-media-dev.c
> > index 289d775c4820..08799beaea42 100644
> > --- a/drivers/staging/media/imx/imx-media-dev.c
> > +++ b/drivers/staging/media/imx/imx-media-dev.c
> > @@ -391,7 +391,7 @@ static int imx_media_inherit_controls(struct
> > imx_media_dev *imxmd,
> >
> > ret = v4l2_ctrl_add_handler(vfd->ctrl_handler,
> > sd->ctrl_handler,
> > - NULL);
> > + NULL, true);
> > if (ret)
> > return ret;
> > }
> > diff --git a/drivers/staging/media/imx/imx-media-fim.c
> > b/drivers/staging/media/imx/imx-media-fim.c
> > index 6df189135db8..8cf773eef9da 100644
> > --- a/drivers/staging/media/imx/imx-media-fim.c
> > +++ b/drivers/staging/media/imx/imx-media-fim.c
> > @@ -463,7 +463,7 @@ int imx_media_fim_add_controls(struct imx_media_fim
> > *fim)
> > {
> > /* add the FIM controls to the calling subdev ctrl handler */
> > return v4l2_ctrl_add_handler(fim->sd->ctrl_handler,
> > - &fim->ctrl_handler, NULL);
> > + &fim->ctrl_handler, NULL, false);
> > }
> > EXPORT_SYMBOL_GPL(imx_media_fim_add_controls);
> >
>
>
