Hi Sakari,
Thank you for review.
On 24.07.2018 15:49, Sakari Ailus wrote:
> Hi Todor,
>
> On Mon, Jul 23, 2018 at 02:02:35PM +0300, Todor Tomov wrote:
>> There is a PM domain for each of the VFE hardware modules. Add
>> support for basic runtime PM support to be able to control the
>> PM domains. When a PM domain needs to be powered on - a device
>> link is created. When a PM domain needs to be powered off -
>> its device link is removed. This allows separate and
>> independent control of the PM domains.
>>
>> Suspend/Resume is still not supported.
>>
>> Signed-off-by: Todor Tomov <todor.to...@linaro.org>
>> ---
>> drivers/media/platform/qcom/camss/camss-csid.c | 4 ++
>> drivers/media/platform/qcom/camss/camss-csiphy.c | 5 ++
>> drivers/media/platform/qcom/camss/camss-ispif.c | 19 ++++++-
>> drivers/media/platform/qcom/camss/camss-vfe.c | 13 +++++
>> drivers/media/platform/qcom/camss/camss.c | 63
>> ++++++++++++++++++++++++
>> drivers/media/platform/qcom/camss/camss.h | 11 +++++
>> 6 files changed, 113 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/camss/camss-csid.c
>> b/drivers/media/platform/qcom/camss/camss-csid.c
>> index 627ef44..ea2b0ba 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csid.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csid.c
>> @@ -13,6 +13,7 @@
>> #include <linux/kernel.h>
>> #include <linux/of.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/regulator/consumer.h>
>> #include <media/media-entity.h>
>> #include <media/v4l2-device.h>
>> @@ -316,6 +317,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
>> if (on) {
>> u32 hw_version;
>>
>> + pm_runtime_get_sync(dev);
>> +
>> ret = regulator_enable(csid->vdda);
>
> Shouldn't the regulator be enabled in the runtime_resume callback instead?
Ideally - yes, but it becomes more complex (different pipelines are possible
and we have only one callback) so (at least for now) I have left it as it is
and stated in the commit message that suspend/resume is still not supported.
>
>> if (ret < 0)
>> return ret;
>
> Note that you'll need pm_runtime_put() in in error handling here. Perhaps
> elsewhere, too.
Yes, I'll add it here and on all other places.
>
> Can powering on the device (i.e. pm_runtime_get_sync() call) fail?
I'd really like to say that it cannot fail :) at least the callback is
empty for now and cannot fail, but the logic in pm_runtime_get_sync()
is not that simple and I'm really not sure. I'll add checks in the code
in case it fails.
>
>> @@ -348,6 +351,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
>> disable_irq(csid->irq);
>> camss_disable_clocks(csid->nclocks, csid->clock);
>> ret = regulator_disable(csid->vdda);
>> + pm_runtime_put_sync(dev);
>> }
>>
>> return ret;
>> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c
>> b/drivers/media/platform/qcom/camss/camss-csiphy.c
>> index 0383e94..2db78791 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csiphy.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
>> @@ -13,6 +13,7 @@
>> #include <linux/kernel.h>
>> #include <linux/of.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> #include <media/media-entity.h>
>> #include <media/v4l2-device.h>
>> #include <media/v4l2-subdev.h>
>> @@ -240,6 +241,8 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int
>> on)
>> u8 hw_version;
>> int ret;
>>
>> + pm_runtime_get_sync(dev);
>> +
>> ret = csiphy_set_clock_rates(csiphy);
>> if (ret < 0)
>> return ret;
>
> Like here.
Yes, I'll add it here too.
--
Best regards,
Todor Tomov
