Hi Biju, Thanks for your patch.
On 2018-09-10 15:31:16 +0100, Biju Das wrote: > Document RZ/G2M (R8A774A1) SoC bindings. > > The RZ/G2M SoC is similar to R-Car M3-W (R8A7796). > > Signed-off-by: Biju Das <biju....@bp.renesas.com> > Reviewed-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt > b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 2f42005..8c81689 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver. > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774a1" for the R8A774A1 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -58,9 +59,9 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > +Gen3 and RZ/G2 platforms can support both a single connected parallel input > source > from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > -- > 2.7.4 > -- Regards, Niklas Söderlund