The original commit (the one reverted in this patch) introduced a
regression,
making a previously flawless adapter unresponsive after running a few
hours
to days. Since I never experienced the problems that the original commit
is
supposed to fix, I propose to revert the change until a regression-free
variant is found.
Before submitting this, I've been running a system 24x7 with this revert
for
several weeks now, and it's running stable again.
It's not a pure revert, as the original commit does not revert cleanly
anymore due to other changes, but content-wise it is.
Signed-off-by: Markus Dobel <markus.do...@gmx.de>
---
drivers/media/pci/cx23885/cx23885-core.c | 60 ------------------------
drivers/media/pci/cx23885/cx23885-reg.h | 14 ------
2 files changed, 74 deletions(-)
diff --git a/drivers/media/pci/cx23885/cx23885-core.c
b/drivers/media/pci/cx23885/cx23885-core.c
index 39804d830305..606f6fc0e68b 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -601,25 +601,6 @@ static void cx23885_risc_disasm(struct
cx23885_tsport *port,
}
}
-static void cx23885_clear_bridge_error(struct cx23885_dev *dev)
-{
- uint32_t reg1_val = cx_read(TC_REQ); /* read-only */
- uint32_t reg2_val = cx_read(TC_REQ_SET);
-
- if (reg1_val && reg2_val) {
- cx_write(TC_REQ, reg1_val);
- cx_write(TC_REQ_SET, reg2_val);
- cx_read(VID_B_DMA);
- cx_read(VBI_B_DMA);
- cx_read(VID_C_DMA);
- cx_read(VBI_C_DMA);
-
- dev_info(&dev->pci->dev,
- "dma in progress detected 0x%08x 0x%08x, clearing\n",
- reg1_val, reg2_val);
- }
-}
-
static void cx23885_shutdown(struct cx23885_dev *dev)
{
/* disable RISC controller */
@@ -665,8 +646,6 @@ static void cx23885_reset(struct cx23885_dev *dev)
cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
cx_write(PAD_CTRL, 0x00500300);
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
msleep(100);
cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
@@ -683,11 +662,6 @@ static void cx23885_reset(struct cx23885_dev *dev)
cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128,
0);
cx23885_gpio_setup(dev);
-
- cx23885_irq_get_mask(dev);
-
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
}
@@ -702,8 +676,6 @@ static int cx23885_pci_quirks(struct cx23885_dev
*dev)
if (dev->bridge == CX23885_BRIDGE_885)
cx_clear(RDR_TLCTL0, 1 << 4);
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
return 0;
}
@@ -1392,9 +1364,6 @@ int cx23885_start_dma(struct cx23885_tsport *port,
dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__,
dev->width, dev->height, dev->field);
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
-
/* Stop the fifo and risc engine for this port */
cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
@@ -1482,26 +1451,16 @@ int cx23885_start_dma(struct cx23885_tsport
*port,
case CX23885_BRIDGE_888:
/* enable irqs */
dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
cx_set(port->reg_dma_ctl, port->dma_ctl_val);
-
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
cx23885_irq_add(dev, port->pci_irqmask);
cx23885_irq_enable_all(dev);
-
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
break;
default:
BUG();
}
cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
cx23885_av_clk(dev, 1);
@@ -1509,11 +1468,6 @@ int cx23885_start_dma(struct cx23885_tsport
*port,
if (debug > 4)
cx23885_tsport_reg_dump(port);
- cx23885_irq_get_mask(dev);
-
- /* clear dma in progress */
- cx23885_clear_bridge_error(dev);
-
return 0;
}
@@ -1521,26 +1475,12 @@ static int cx23885_stop_dma(struct
cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
u32 reg;
- int delay = 0;
- uint32_t reg1_val;
- uint32_t reg2_val;
dprintk(1, "%s()\n", __func__);
/* Stop interrupts and DMA */
cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
- /* just in case wait for any dma to complete before allowing dealloc
*/
- mdelay(20);
- for (delay = 0; delay < 100; delay++) {
- reg1_val = cx_read(TC_REQ);
- reg2_val = cx_read(TC_REQ_SET);
- if (reg1_val == 0 || reg2_val == 0)
- break;
- mdelay(1);
- }
- dev_dbg(&dev->pci->dev, "delay=%d reg1=0x%08x reg2=0x%08x\n",
- delay, reg1_val, reg2_val);
if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
reg = cx_read(PAD_CTRL);
diff --git a/drivers/media/pci/cx23885/cx23885-reg.h
b/drivers/media/pci/cx23885/cx23885-reg.h
index 08cec8d91742..2d3cbafe2402 100644
--- a/drivers/media/pci/cx23885/cx23885-reg.h
+++ b/drivers/media/pci/cx23885/cx23885-reg.h
@@ -288,18 +288,6 @@ Channel manager Data Structure entry = 20 DWORD
#define AUDIO_EXT_INT_MSTAT 0x00040068
#define AUDIO_EXT_INT_SSTAT 0x0004006C
-/* Bits [7:0] set in both TC_REQ and TC_REQ_SET
- * indicate a stall in the RISC engine for a
- * particular rider traffic class. This causes
- * the 885 and 888 bridges (unknown about 887)
- * to become inoperable. Setting bits in
- * TC_REQ_SET resets the corresponding bits
- * in TC_REQ (and TC_REQ_SET) allowing
- * operation to continue.
- */
-#define TC_REQ 0x00040090
-#define TC_REQ_SET 0x00040094
-
#define RDR_CFG0 0x00050000
#define RDR_CFG1 0x00050004
#define RDR_CFG2 0x00050008
@@ -398,8 +386,6 @@ Channel manager Data Structure entry = 20 DWORD
#define VID_B_PIXEL_FRMT 0x00130184
/* Video C Interface */
-#define VID_C_DMA 0x00130200
-#define VBI_C_DMA 0x00130208
#define VID_C_GPCNT 0x00130220
#define VID_C_GPCNT_CTL 0x00130230
#define VBI_C_GPCNT_CTL 0x00130234
--
2.17.2
