[PATCH 8/8] media: gspca: ov534-ov772x: remove unnecessary COM3 initialization

[Philipp Zabel]

The COM3 register at address 0x0c already defaults to 0x10, the two bits
COM3[7:6] are set according to V4L2 controls by sethvflip later.
There is no need to set it multiple times during bridge initialization.

Signed-off-by: Philipp Zabel <philipp.za...@gmail.com>
---
 drivers/media/usb/gspca/ov534.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/usb/gspca/ov534.c b/drivers/media/usb/gspca/ov534.c
index 23deeedd3279..02c90ad96b76 100644
--- a/drivers/media/usb/gspca/ov534.c
+++ b/drivers/media/usb/gspca/ov534.c
@@ -543,13 +543,10 @@ static const u8 sensor_init_772x[][2] = {
        { 0x8c, 0xe8 },
        { 0x8d, 0x20 },
 
-       { 0x0c, 0x90 },
-
        { 0x2b, 0x00 },
        { 0x22, 0x7f },
        { 0x23, 0x03 },
        { 0x11, 0x01 },
-       { 0x0c, 0xd0 },
        { 0x64, 0xff },
        { 0x0d, 0x41 },
 
@@ -557,7 +554,6 @@ static const u8 sensor_init_772x[][2] = {
        { 0x0e, 0xcd },
        { 0xac, 0xbf },
        { 0x8e, 0x00 },         /* De-noise threshold */
-       { 0x0c, 0xd0 }
 };
 static const u8 bridge_start_vga_yuyv_772x[][2] = {
        {0x88, 0x00},
-- 
2.20.0