Wow! I see I need a flame retardant suit here after the last few emails from
the list... but to the point:
I have an HP HDX 18t with a PCI-E TV Card. Looks to be an Avermedia A317 based
on the Windows .inf file and the PCI vendor/product and subsystem
vendor/product ids.
I've started to kick around the saa716x_hybrid.c file to support the card. I
can sort-of see how to add support in saa716x_hybrid.c, but I'm not sure as to
what is needed.
1) Looks like I need a separate MAKE_ENTRY for the combination of 7160 and
1055 product ids.
2) Looks like I need a separate config structure. However, I'm not sure of
the I2C addresses - do all 7160 cards have things at the same I2C addresses?
3) Windows oem9.inf file suggests this card has a TDA18271 thingy - I assume
this is the tuner chip.
4) I see the tda18271_attach routine - and I see that it can be called via
dvb_attach, but I don't know where to get the "frontend" structure thingy.
Details: (apologies if word wrap is messed up...)
05:00.0 0480: 1131:7160 (rev 03)
Subsystem: 1461:1055
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Pointers and/or hints are appreciated.
Thanks,
Chuck McCrobie
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
