Franklin Meng wrote:
> Patch to add the s_power function to the saa7115.c code.
>
> Signed-off-by: Franklin Meng<fmeng2...@yahoo.com>
I got an error while applying:
No file to patch. Skipping patch.
patch: **** malformed patch at line 22: return 0;
Patch may be line wrapped
I suspect that your email is destroying your patch.
>
>
> diff -r b6b82258cf5e linux/drivers/media/video/saa7115.c
>
> --- a/linux/drivers/media/video/saa7115.c Thu Dec 31 19:14:54 2009
> -0200
> +++ b/linux/drivers/media/video/saa7115.c Sun Jan 17 22:54:21 2010
> -0800
> @@ -1338,6 +1338,59 @@
>
> return 0;
>
> }
>
>
>
> +static int saa711x_s_power(struct v4l2_subdev *sd, int val)
>
> +{
>
> + struct saa711x_state *state = to_state(sd);
>
> +
>
> + if(val > 1 || val < 0)
>
> + return -EINVAL;
Also, please validade your patch against coding style, with checkpatch.pl (you
can use
make checkpatch, if you're using the -hg tree).
Basically, you need a space between if and ( at the above line.
> +
>
> + /* There really isn't a way to put the chip into power saving
>
> + other than by pulling CE to ground so all we do is return
>
> + out of this function
>
> + */
>
> + if(val == 0)
>
> + return 0;
>
> +
>
> + /* When enabling the chip again we need to reinitialize the
>
> + all the values
>
> + */
>
> + state->input = -1;
>
> + state->output = SAA7115_IPORT_ON;
>
> + state->enable = 1;
>
> + state->radio = 0;
>
> + state->bright = 128;
>
> + state->contrast = 64;
>
> + state->hue = 0;
>
> + state->sat = 64;
>
> +
>
> + state->audclk_freq = 48000;
>
> +
>
> + v4l2_dbg(1, debug, sd, "writing init values s_power\n");
>
> +
>
> + /* init to 60hz/48khz */
>
> + state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
>
> + switch (state->ident) {
>
> + case V4L2_IDENT_SAA7111:
>
> + saa711x_writeregs(sd, saa7111_init);
>
> + break;
>
> + case V4L2_IDENT_SAA7113:
>
> + saa711x_writeregs(sd, saa7113_init);
> + break;
> + default:
> + state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
> + saa711x_writeregs(sd, saa7115_init_auto_input);
> + }
> + if (state->ident != V4L2_IDENT_SAA7111)
> + saa711x_writeregs(sd, saa7115_init_misc);
> + saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
> +
> + v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
> + saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
> + saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC));
> + return 0;
> +}
> +
> static int saa711x_reset(struct v4l2_subdev *sd, u32 val)
> {
> v4l2_dbg(1, debug, sd, "decoder RESET\n");
> @@ -1513,6 +1566,7 @@
> .s_std = saa711x_s_std,
> .reset = saa711x_reset,
> .s_gpio = saa711x_s_gpio,
> + .s_power = saa711x_s_power,
> #ifdef CONFIG_VIDEO_ADV_DEBUG
> .g_register = saa711x_g_register,
> .s_register = saa711x_s_register,
>
>
>
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
