On Thu, 2019-06-06 at 17:06 +0200, Boris Brezillon wrote:
> On Wed, 5 Jun 2019 13:22:42 +0200
> Boris Brezillon <[email protected]> wrote:
>
> > On Fri, 31 May 2019 10:55:14 +0200
> > Philipp Zabel <[email protected]> wrote:
> >
> > > Rename the driver and all relevant identifiers from Rockchip to Hantro,
> > > as other Hantro IP based VPU implementations can be supported by the
> > > same driver.
> > > The RK3288 decoder is Hantro G1 based, the encoder is Hantro H1.
> > >
> > > This patch just renames, no functional changes.
> > >
> > > Signed-off-by: Philipp Zabel <[email protected]>
> > > Reviewed-by: Boris Brezillon <[email protected]>
> > > ---
> > > MAINTAINERS | 4 +-
> > > drivers/staging/media/Kconfig | 2 +-
> > > drivers/staging/media/Makefile | 2 +-
> > > .../media/{rockchip/vpu => hantro}/Kconfig | 11 +-
> > > drivers/staging/media/hantro/Makefile | 13 +
> > > .../media/{rockchip/vpu => hantro}/TODO | 0
> > > .../vpu/rockchip_vpu.h => hantro/hantro.h} | 136 +++++-----
> > > .../hantro_drv.c} | 251 +++++++++---------
> > > .../hantro_g1_mpeg2_dec.c} | 55 ++--
> > > .../hantro_h1_jpeg_enc.c} | 44 +--
> > > drivers/staging/media/hantro/hantro_hw.h | 102 +++++++
> > > .../hantro_jpeg.c} | 18 +-
> > > drivers/staging/media/hantro/hantro_jpeg.h | 13 +
> > > .../hantro_mpeg2.c} | 14 +-
> > > .../hantro_v4l2.c} | 234 ++++++++--------
> > > .../hantro_v4l2.h} | 16 +-
> > > .../{rockchip/vpu => hantro}/rk3288_vpu_hw.c | 64 ++---
> > > .../vpu => hantro}/rk3288_vpu_regs.h | 2 +-
> > > .../{rockchip/vpu => hantro}/rk3399_vpu_hw.c | 64 ++---
> > > .../vpu => hantro}/rk3399_vpu_hw_jpeg_enc.c | 32 +--
> > > .../vpu => hantro}/rk3399_vpu_hw_mpeg2_dec.c | 37 ++-
> > > .../vpu => hantro}/rk3399_vpu_regs.h | 2 +-
> > > drivers/staging/media/rockchip/vpu/Makefile | 14 -
> > > .../media/rockchip/vpu/rockchip_vpu_hw.h | 103 -------
> > > .../media/rockchip/vpu/rockchip_vpu_jpeg.h | 14 -
> > > 25 files changed, 616 insertions(+), 631 deletions(-)
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/Kconfig (59%)
> > > create mode 100644 drivers/staging/media/hantro/Makefile
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/TODO (100%)
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu.h =>
> > > hantro/hantro.h} (69%)
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu_drv.c =>
> > > hantro/hantro_drv.c} (74%)
> > > rename drivers/staging/media/{rockchip/vpu/rk3288_vpu_hw_mpeg2_dec.c =>
> > > hantro/hantro_g1_mpeg2_dec.c} (87%)
> > > rename drivers/staging/media/{rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c =>
> > > hantro/hantro_h1_jpeg_enc.c} (76%)
> > > create mode 100644 drivers/staging/media/hantro/hantro_hw.h
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu_jpeg.c =>
> > > hantro/hantro_jpeg.c} (95%)
> > > create mode 100644 drivers/staging/media/hantro/hantro_jpeg.h
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu_mpeg2.c =>
> > > hantro/hantro_mpeg2.c} (79%)
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu_v4l2.c =>
> > > hantro/hantro_v4l2.c} (69%)
> > > rename drivers/staging/media/{rockchip/vpu/rockchip_vpu_v4l2.h =>
> > > hantro/hantro_v4l2.h} (53%)
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/rk3288_vpu_hw.c
> > > (68%)
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/rk3288_vpu_regs.h
> > > (99%)
> >
> > Didn't notice that in my initial review, but rk3288_vpu_regs.h should
> > be split in 2: hantro_{g1,h1}_regs.h (g1 being the decoder part and h1
> > the encoder).
Will do. I'll also rename the registers from V[DE]PU_REG to [GH]1_REG.
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/rk3399_vpu_hw.c
> > > (69%)
> > > rename drivers/staging/media/{rockchip/vpu =>
> > > hantro}/rk3399_vpu_hw_jpeg_enc.c (86%)
> > > rename drivers/staging/media/{rockchip/vpu =>
> > > hantro}/rk3399_vpu_hw_mpeg2_dec.c (92%)
> > > rename drivers/staging/media/{rockchip/vpu => hantro}/rk3399_vpu_regs.h
> > > (99%)
> >
> > Same here, rk3399_vpu_regs.h should be split into hantro_{g2,h2}_regs.h
> > (I still need to make sure this is actually a g2/h2 combo we have on
> > this SoC). That's also true for the
> > rk3399_vpu_hw_{mpeg2_dec,jpeg_enc}.c files: they should be renamed
> > hantro_{g2_mpeg2_dec,h2_jpeg_enc}.c
>
> Sorry, I was wrong, it's not a G2/H2 combo we have, it looks like G1/H1
> with shuffled regs/fields. The ID are 0x45142158 (for the decoder) and
> 0x3a122158 (for the encoder). Couldn't find any reference to those IDs
> in the hantro reference drivers.
>
> Anyway, I'm working on abstracting the reg layout so we can have the
> same base of code for both variants.
Ok, I'll keep this part as is for now.
regards
Philipp
