Hans de Goede wrote: > Hi, > > Nack! > > Németh I know you mean well, but please don't go making > semi random behavior changes to code you don't have > hardware to test with.
I thought it is easier to write the patch I was thinking of than trying to describe it in words. Maybe it was not the best idea, sorry about that. > There is a good reason this code is written the way it is. > > Jean-Francois, > > If you wonder what this is all about, this is a patch on > top of one of my trees which no one else has yet as > I have not send any pull request yet, see: > http://linuxtv.org/hg/~hgoede/gspca_jf > > So back to the reason why this code is written the way it is, > the zc3xx sends a steady stream of interrupt packets consisting > of usually 8 0 byes, we definitely do not want to print out an > error message every time such a packet is received. > > On some cams when they are just plugged in the 6th byte (data[5]) > becomes 1 a couple of times, probably a floating pin. > > And on all cams with a button, pressing that will make the > 5th byte (data[4]) 1. As said these cam sends a steady > stream of interrupt packets, reporting I guess the > status of 8 gpio pins independent on whether this status > has changed since the last packet or not. Based on your description the following two lines could be separated: input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); The first line should go when we detect a 0->1 transient (button push), the second one when there is an 1->0 transient (button release). In case of pac7302 there was only one event at button push. So there was a need to simulate push and release. The camera haven't sent anything when the button was released. > I've tested this with the following cams: > Logitech QuickCam IM/Connect 046d:08d9 zc3xx HV7131R > Logitech QuickCam E2500 046d:089d zc3xx MC501CB > Labtec notebook cam 046d:08aa zc3xx PAS202B > Creative WebCam Notebook 041e:401f zc3xx TAS5130C > Creative Live! Cam Video IM 041e:4053 zc3xx TAS5130-VF250 > Philips SPC 200NC 0471:0325 zc3xx PAS106 > Creative WebCam NX Pro 041e:401e zc3xx HV7131B > No brand 0ac8:307b zc3xx ADCM2700 > > Regards, > > Hans > > > > On 01/29/2010 09:07 PM, Németh Márton wrote: >> Signed-off-by: Márton Németh<nm...@freemail.hu> >> --- >> diff -r 95d3956ea3e5 linux/drivers/media/video/gspca/zc3xx.c >> --- a/linux/drivers/media/video/gspca/zc3xx.c Fri Jan 29 15:05:25 >> 2010 +0100 >> +++ b/linux/drivers/media/video/gspca/zc3xx.c Fri Jan 29 21:01:52 >> 2010 +0100 >> @@ -7213,14 +7213,17 @@ >> u8 *data, /* interrupt packet data */ >> int len) /* interrput packet length */ >> { >> + int ret = -EINVAL; >> + >> if (len == 8&& data[4] == 1) { >> input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); >> input_sync(gspca_dev->input_dev); >> input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); >> input_sync(gspca_dev->input_dev); >> + ret = 0; >> } >> >> - return 0; >> + return ret; >> } >> #endif >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
