On 2019-07-08 13:08, Marc Gonzalez wrote:
> Hello everyone,
*snip*
Focusing on #2...
> PROBLEM #2
>
> The tuner (si2157) is not on the i2c5 bus, instead it is on a private
> i2c bus *behind* si2168, which routes requests to the proper client.
> For the time being, I don't know how to model this relationship in DT.
> (TODO: check i2c_slave_cb_t slave_cb in struct i2c_client)
> I have initialized si2157 in the si2168 driver, but this doesn't feel
> right. (Though it seems all(?) users pair 2168 with 2157.)
>
>
> It would really help if I could get some guidance from media and i2c
> people for these two issues. (I'd like to upstream the driver in time
> for 5.3)
>
> Regards.
>
>
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8098-batfish.dts
> b/arch/arm64/boot/dts/qcom/apq8098-batfish.dts
> index 29d59ecad138..9353e62375a7 100644
> --- a/arch/arm64/boot/dts/qcom/apq8098-batfish.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8098-batfish.dts
> @@ -30,6 +30,28 @@
> status = "ok";
> };
>
> +&blsp1_i2c5 {
> + status = "ok";
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_default>;
> +
> + dvb_demod: si2168@64 {
> + compatible = "silabs,si2168";
> + reg = <0x64>;
> + reset-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
In principle, I think you should be able to add something like this here:
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
tuner@60 {
compatible = "silabs,si2157";
reg = <0x60>;
/* whatever else is needed */
};
};
But in practice, I don't know if the si2157 driver understands that or
if there is anything else that gets in the way. Totally untested...
The i2c-gate child node is examined when you call i2c_mux_add_adapter
if you have provided the correct struct device in the second argument
when you called i2c_mux_alloc (I think that is already the case). You
also need to set the I2C_MUX_GATE flag in the i2c_mux_alloc call, but
I do not see a problem with that since I think only one child adapter
is added. If it is a problem to add the I2C_MUX_GATE flag, then you
can just adjust the above i2c-gate node according to the bindings in
Documentation/devicetree/bindings/i2c/i2c-mux.txt. I.e. add this
instead of the above i2c-gate node:
i2c-mux {
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tuner@60 {
compatible = "silabs,si2157";
reg = <0x60>;
/* whatever else is needed */
};
};
};
But it feels *right* to add the I2C_MUX_GATE flag, because a gate is
what you have. I think?
Cheers,
Peter
> + };
> +};
> +
> +&tsif {
> + demod = <&dvb_demod>;
> +};
> +
> +&i2c5_default {
> + drive-strength = <2>;
> + bias-disable;
> +};
> +
> &qusb2phy {
> status = "ok";
> vdda-pll-supply = <&vreg_l12a_1p8>;
