On Sun, 2019-09-15 at 14:50 +0800, Louis Kuo wrote:
> Add nodes for Mediatek's sensor interface device. Sensor interface module
> embedded in Mediatek SOCs, works as a HW camera interface controller
> intended for image and data transmission between cameras and host devices.
>
> Signed-off-by: Louis Kuo <louis....@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 66aaa07f6cec..f1d081b99867 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -506,4 +506,18 @@
> #clock-cells = <1>;
> };
> };
> +
> + seninf: seninf@1a040000 {
> + compatible = "mediatek,mt8183-seninf";
> + reg = <0 0x1a040000 0 0x8000>,
> + <0 0x11C80000 0 0x6000>;
Please use lower case for hex value.
> + reg-names = "base_reg", "rx_reg";
> + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> + clocks = <&camsys CLK_CAM_SENINF>,
> + <&topckgen CLK_TOP_MUX_SENINF>;
> + clock-names = "CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF";
> + status = "disabled";
> + };
> + };
extra } ?
Joe.C
