Hi Mauro,
On 10/2/19 10:16 AM, Jenkins Builder Robot wrote:
> See
> <https://builder.linuxtv.org/job/v4l-utils/43/display/redirect?page=changes>
>
> Changes:
>
> [hverkuil-cisco] keytable: add new generated keymaps
>
> [hverkuil-cisco] msg2ctl.pl: add newline after log_msg
>
> [hverkuil-cisco] cec-follower: drop the hardcoded UI commands list
>
> [hverkuil-cisco] cec-ctl/cec-log: use new CEC_OP_UI_CMD defines
You need to remove utils/cec-follower/cec-log.h.
This file was generated but the generated file is now called cec-log-gen.h.
A new cec-log.h was also added to utils/common as a companion to cec-log.cpp.
Unfortunately, the old cec-log.h clashes with the new cec-log.h. And since
the old cec-log.h was generated and so is not part of the git repo it is
not removed as part of a 'git pull'.
Anyway, just remove utils/cec-follower/cec-log.h and it compiles again.
Regards,
Hans
>
>
> ------------------------------------------
> [...truncated 1.10 MB...]
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope
> #define arg_on arg_u8
> ^~~~~~
> ./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’
> log_arg(&arg_on, "on", on);
> ^~~~~~
> ./cec-log.h:800:16: note: suggested alternative: ‘arg_on’
> #define arg_on arg_u8
> ^~~~~~
> ./cec-log.h:2584:12: note: in expansion of macro ‘arg_on’
> log_arg(&arg_on, "on", on);
> ^~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2584:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_on, "on", on);
> ^~~~~~~
> ./cec-log.h:2584:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_on, "on", on);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:800:16: error: ‘arg_u8’ was not declared in this scope
> #define arg_on arg_u8
> ^~~~~~
> ./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’
> log_arg(&arg_on, "on", on);
> ^~~~~~
> ./cec-log.h:800:16: note: suggested alternative: ‘arg_on’
> #define arg_on arg_u8
> ^~~~~~
> ./cec-log.h:2594:12: note: in expansion of macro ‘arg_on’
> log_arg(&arg_on, "on", on);
> ^~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2594:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_on, "on", on);
> ^~~~~~~
> ./cec-log.h:2594:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_on, "on", on);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:818:21: error: ‘arg_u8’ was not declared in this scope
> #define arg_minutes arg_u8
> ^~~~~~
> ./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’
> log_arg(&arg_minutes, "minutes", minutes);
> ^~~~~~~~~~~
> ./cec-log.h:818:21: note: suggested alternative: ‘arg_on’
> #define arg_minutes arg_u8
> ^~~~~~
> ./cec-log.h:2603:12: note: in expansion of macro ‘arg_minutes’
> log_arg(&arg_minutes, "minutes", minutes);
> ^~~~~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2603:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_minutes, "minutes", minutes);
> ^~~~~~~
> ./cec-log.h:2603:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_minutes, "minutes", minutes);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope
> #define arg_time arg_string
> ^~~~~~~~~~
> ./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’
> log_arg(&arg_time, "time", time);
> ^~~~~~~~
> ./cec-log.h:811:18: note: suggested alternative: ‘arg_time’
> #define arg_time arg_string
> ^~~~~~~~~~
> ./cec-log.h:2611:12: note: in expansion of macro ‘arg_time’
> log_arg(&arg_time, "time", time);
> ^~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2611:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_time, "time", time);
> ^~~~~~~
> ./cec-log.h:2611:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_time, "time", time);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:811:18: error: ‘arg_string’ was not declared in this scope
> #define arg_time arg_string
> ^~~~~~~~~~
> ./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’
> log_arg(&arg_time, "time", time);
> ^~~~~~~~
> ./cec-log.h:811:18: note: suggested alternative: ‘arg_time’
> #define arg_time arg_string
> ^~~~~~~~~~
> ./cec-log.h:2619:12: note: in expansion of macro ‘arg_time’
> log_arg(&arg_time, "time", time);
> ^~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2619:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_time, "time", time);
> ^~~~~~~
> ./cec-log.h:2619:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_time, "time", time);
> ^~~~~~~
> log_msg
> ./cec-log.h:2630:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src);
> ^~~~~~~
> ./cec-log.h:2630:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_htng_input_src, "htng-input-src", htng_input_src);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:579:19: error: ‘arg_u16’ was not declared in this scope
> #define arg_major arg_u16
> ^~~~~~~
> ./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’
> log_arg(&arg_major, "major", major);
> ^~~~~~~~~
> ./cec-log.h:579:19: note: suggested alternative: ‘arg_osd’
> #define arg_major arg_u16
> ^~~~~~~
> ./cec-log.h:2632:12: note: in expansion of macro ‘arg_major’
> log_arg(&arg_major, "major", major);
> ^~~~~~~~~
> ./cec-log.h:801:17: error: ‘arg_u8’ was not declared in this scope
> #define arg_vol arg_u8
> ^~~~~~
> ./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’
> log_arg(&arg_vol, "vol", vol);
> ^~~~~~~
> ./cec-log.h:801:17: note: suggested alternative: ‘arg_on’
> #define arg_vol arg_u8
> ^~~~~~
> ./cec-log.h:2642:12: note: in expansion of macro ‘arg_vol’
> log_arg(&arg_vol, "vol", vol);
> ^~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2642:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_vol, "vol", vol);
> ^~~~~~~
> ./cec-log.h:2642:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_vol, "vol", vol);
> ^~~~~~~
> log_msg
> ./cec-log.h:2662:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
> ^~~~~~~
> ./cec-log.h:2662:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope
> #define arg_freq arg_u16
> ^~~~~~~
> ./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’
> log_arg(&arg_freq, "freq", freq);
> ^~~~~~~~
> ./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’
> #define arg_freq arg_u16
> ^~~~~~~
> ./cec-log.h:2665:12: note: in expansion of macro ‘arg_freq’
> log_arg(&arg_freq, "freq", freq);
> ^~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2679:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
> ^~~~~~~
> ./cec-log.h:2679:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_htng_chan_type, "htng-chan-type", htng_chan_type);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:792:18: error: ‘arg_u16’ was not declared in this scope
> #define arg_chan arg_u16
> ^~~~~~~
> ./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’
> log_arg(&arg_chan, "chan", chan);
> ^~~~~~~~
> ./cec-log.h:792:18: note: suggested alternative: ‘arg_osd’
> #define arg_chan arg_u16
> ^~~~~~~
> ./cec-log.h:2681:12: note: in expansion of macro ‘arg_chan’
> log_arg(&arg_chan, "chan", chan);
> ^~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2702:3: error: ‘log_arg’ was not declared in this scope
> log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type);
> ^~~~~~~
> ./cec-log.h:2702:3: note: suggested alternative: ‘log_msg’
> log_arg(&arg_htng_ext_chan_type, "htng-ext-chan-type", htng_ext_chan_type);
> ^~~~~~~
> log_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:831:18: error: ‘arg_u16’ was not declared in this scope
> #define arg_freq arg_u16
> ^~~~~~~
> ./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’
> log_arg(&arg_freq, "freq", freq);
> ^~~~~~~~
> ./cec-log.h:831:18: note: suggested alternative: ‘arg_osd’
> #define arg_freq arg_u16
> ^~~~~~~
> ./cec-log.h:2705:12: note: in expansion of macro ‘arg_freq’
> log_arg(&arg_freq, "freq", freq);
> ^~~~~~~~
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h:2719:3: error: ‘log_htng_unknown_msg’ was not declared in this
> scope
> log_htng_unknown_msg(msg);
> ^~~~~~~~~~~~~~~~~~~~
> ./cec-log.h:2719:3: note: suggested alternative: ‘log_htng_msg’
> log_htng_unknown_msg(msg);
> ^~~~~~~~~~~~~~~~~~~~
> log_htng_msg
> In file included from cec-follower.h:25,
> from cec-follower.cpp:21:
> ./cec-log.h: At global scope:
> ./cec-log.h:861:29: warning: ‘messages’ defined but not used
> [-Wunused-variable]
> static const struct message messages[] = {
> ^~~~~~~~
> make[3]: *** [Makefile:607: cec_follower-cec-follower.o] Error 1
> make[3]: Leaving directory
> '<https://builder.linuxtv.org/job/v4l-utils/ws/utils/cec-follower'>
> make[2]: *** [Makefile:481: all-recursive] Error 1
> make[2]: Leaving directory
> '<https://builder.linuxtv.org/job/v4l-utils/ws/utils'>
> make[1]: *** [Makefile:590: all-recursive] Error 1
> make[1]: Leaving directory '<https://builder.linuxtv.org/job/v4l-utils/ws/'>
> make: *** [Makefile:517: all] Error 2
> Build step 'Execute shell' marked build as failure
>
