Hi Hans, On 2019-10-23 09:01:40 +0200, Hans Verkuil wrote: > Hi Niklas, > > For one reason or another this series was never reviewed/picked up and > it now no longer applies. > > Combined with the big switch to a monolithic driver I am sure that this > series needs to be redone. So I am marking it as "Changes Requested" and > it is up to you to decide whether to rebase/rework this series.
I talked to Helen about this series and she thought it could be a nice candidate for a student workshop/class so I'm not planing to respin this myself. > > Regards, > > Hans > > On 5/18/19 3:07 AM, Niklas Söderlund wrote: > > Hi, > > > > This series adds support for two (or more) capture devices to be > > connected to the same senors and run simultaneously. Each capture device > > can be started and stopped independent of each other. > > > > Patch 1/3 and 2/3 deals with solving the issues that arises once two > > capture devices can be part of the same pipeline. While 3/3 allows for > > two capture devices to be part of the same pipeline and thus allows for > > simultaneously use. > > > > The series is based on the latest media-tree and it functionality can be > > demonstrated with the following test. > > > >>>> begin test <<< > > mdev=/dev/media0 > > > > media-ctl -d $mdev -l "'Debayer A':1 -> 'Scaler':0 [1]" > > media-ctl -d $mdev -l "'Debayer B':1 -> 'Scaler':0 [0]" > > > > media-ctl -d $mdev -V "'Debayer A':0 [fmt:RGB888_1X24/640x480 field:none]" > > media-ctl -d /dev/media0 -V "'Sensor A':0 [fmt:SRGGB8_1X8/640x480 > > field:none]" > > > > yavta -f RGB24 -s 1920x1440 --field none /dev/video2 > > yavta -f SRGGB8 -s 640x480 --field none /dev/video0 > > > > yavta -f RGB24 -s 1920x1440 --field none /dev/video2 --capture=100 & > > yavta -f SRGGB8 -s 640x480 --field none /dev/video0 --capture=100 > > wait > >>>> end test <<< > > > > In addition to testing with this test the series is tested with multiple > > qv4l2 instances controlling different capture devices connected to the > > same sensor. > > > > Niklas Söderlund (3): > > vimc: Add usage count to subdevices > > vimc: Serialize vimc_streamer_s_stream() > > vimc: Join pipeline if one already exists > > > > drivers/media/platform/vimc/vimc-capture.c | 35 ++++++++++++++++++++- > > drivers/media/platform/vimc/vimc-debayer.c | 8 +++++ > > drivers/media/platform/vimc/vimc-scaler.c | 8 +++++ > > drivers/media/platform/vimc/vimc-sensor.c | 7 +++++ > > drivers/media/platform/vimc/vimc-streamer.c | 23 +++++++++----- > > 5 files changed, 73 insertions(+), 8 deletions(-) > > > -- Regards, Niklas Söderlund
