Franklin Meng wrote:
> This patch adds remote support for the Kworld 315U device
>
> Note: I believe I got most of the mappings correct. Though the
> source and shutdown button probably could be mapped to something
> better.
>
> To be done: Still need to get the Kworld analog patch resubmitted.
> There are still some stuff I want to test with the analog patch before
> I resubmit it. Hopefully this patch will work ok.
>
> Please let me know if there are any issues applying the patch
Hi Franklin,
Could you please add a table with the full scan code?
There are currently two examples of such tables:
ir_codes_rc5_hauppauge_new_table - for RC5 keycodes
ir_codes_nec_terratec_cinergy_xs_table - for NEC keycodes
Basically, a full scan code has a 2-byte code instead of 1-byte,
and you need to specify the protocol at the table, like:
struct ir_scancode_table ir_codes_nec_terratec_cinergy_xs_table = {
.scan = ir_codes_nec_terratec_cinergy_xs,
.size = ARRAY_SIZE(ir_codes_nec_terratec_cinergy_xs),
.ir_type = IR_TYPE_NEC,
};
The em28xx is already prepared to properly handle the protocol.
the advantage of using a full table is that it is easy to replace
the keytable and even the protocol if someone wants to use a different
Remote Controller to control the device.
As you've declared this xclk:
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
I suspect that your keycode is of the type NEC.
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
