Use soc_camera_apply_sensor_flags() in mt9v022 to account for any inverters in video signal paths.
Signed-off-by: Guennadi Liakhovetski <[email protected]> --- drivers/media/video/mt9v022.c | 17 ++++++++--------- 1 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 91df7ec..1a34d29 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -257,19 +257,18 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd, static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd) { struct soc_camera_link *icl = to_soc_camera_link(icd); - unsigned int width_flag; + unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE | + SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | + SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | + SOCAM_DATA_ACTIVE_HIGH; if (icl->query_bus_param) - width_flag = icl->query_bus_param(icl) & - SOCAM_DATAWIDTH_MASK; + flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK; else - width_flag = SOCAM_DATAWIDTH_10; + flags |= SOCAM_DATAWIDTH_10; - return SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | - SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW | - SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | - SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_SLAVE | - width_flag; + return soc_camera_apply_sensor_flags(icl, flags); } static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) -- 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
