Hi,
Here the results of tests.
In FM radio mode regspy.exe reports :
GPIO_GPSTATUS 2840001
In Digital TV
GPIO_GPSTATUS 6040001
In Analog TV
GPIO_GPSTATUS 2040001
In saa7134-cards.c, In section of HVR1120, I've replaced 0x0800100 with
0x2840001 in both lines
gpiomask and in
radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x2840001,
The result is the same. No progress.
To check my install method (I am not professional programmer), I have tested
the driver with replacing "audio_clock = 0x00187de7" with "audio_clock =
0x200000". The result was worst. I can conclude make and make install are
correct.
All tests have been made today using v4l-dvb-14021dfc00f3.tar.gz
All changes have been followed by computer reboot.
Coul I check anything else ?
Regards,
ftape-jlc
Le mercredi 10 février 2010, vous avez écrit :
> Hi,
>
> ftape-jlc wrote:
> > Hello,
> >
> > I didn't received any message about radio on HVR1120.
> > I just want to know if the use /dev/radio0 is deprecated in v4l2 today.
> > In the mails, I only read messages about video or TV.
>
> No, it is not deprecated.
>
> > Did one user of the mailing list have tested actual v4l2 on /dev/radio0 ?
>
> Yes. It works with several devices. Maybe there's a bug at the radio entry
> for your board.
>
> >> The problem is to listen radio.
> >> With Linux, the command used is
> >> /usr/bin/radio -c /dev/radio0
> >> in association with
> >> sox -t ossdsp -r 32000 -c 2 /dev/dsp1 -t ossdsp /dev/dsp
> >> to listen the sound.
> >>
> >> The result is an unstable frecuency. The station is not tuned. Stereo is
> >> permanently switching to mono.
> >> The 91.5MHz station is mixed permanently with other stations.
>
> This probably means that the GPIO setup for your board is wrong for radio.
> Only someone with a HVR1120 could fix it, since the GPIO's are
> board-specific.
>
> The better is if you could try to do it. It is not hard. Please take a look
> at:
>
> http://linuxtv.org/wiki/index.php/GPIO_pins
>
> You'll need to run the regspy.exe utility (part of Dscaler package), and
> check how the original driver sets the GPIO registers. Then edit them on
> your board entry, at saa78134-cards.c, recompile the driver and test.
>
> The better is to use the out-of-tree mercuiral tree:
> http://linuxtv.org/hg/v4l-dvb
>
> since it allows you to recompile and test without needing to replace your
> kernel.
>
>
> Cheers,
> Mauro
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
