On Mon, 22 Mar 2010 13:54:16 -0400 Devin Heitmueller <dheitmuel...@kernellabs.com> wrote:
Hi Devin, > In the meantime, you can add "card=53" as a modprobe option to em28xx, and it > should start working for you. thanks that worked. I was abled to tune to one DVB-T channel, back in the days using Markus Rechberger's driver I had all of the available channels. But this could also be a problem with my antenna setup, I will recheck later. With the old driver I also had support for the remote control, what could be the problem on this topic? I still have to check Analog TV. And finally some dmesg output: usb 1-4: new high speed USB device using ehci_hcd and address 13 em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 5a 00 55 aa 71 74 54 03 00 17 98 01 00 00 00 00 em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb6a56b20 em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: USB Remote wakeup capable em28xx #0: 500mA max power em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 em28xx #0: Identified as Pinnacle Hybrid Pro (card=53) tvp5150 3-005c: chip found @ 0xb8 (em28xx #0) tuner 3-0061: chip found @ 0xc2 (em28xx #0) xc2028 3-0061: creating new instance xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner usb 1-4: firmware: requesting xc3028-v27.fw xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 3-0061: Loading firmware for type=BASE (1), id 0000000000000000. xc2028 3-0061: Loading firmware for type=(0), id 000000000000b700. SCODE (20000000), id 000000000000b700: xc2028 3-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. em28xx #0: Config register raw data: 0x58 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 3-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video0 em28xx #0: V4L2 VBI device registered as vbi0 xc2028 3-0061: attaching existing instance xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner em28xx #0: em28xx #0/2: xc3028 attached DVB: registering new adapter (em28xx #0) DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... em28xx #0: Successfully loaded em28xx-dvb em28xx audio device (eb1a:2881): interface 1, class 1 em28xx audio device (eb1a:2881): interface 2, class 1 -- Hermes powered by LFS SVN-20070420 (Linux 2.6.33.1) Best regards, Steffen Pankratz.
signature.asc
Description: PGP signature
