Hello, I don't have this card but you can try this: http://www.linuxtv.org/wiki/index.php/TeVii_S470#Older_kernels
Is a script for Tevii S470, change the firmware path. Good luck! 2010/5/7 Tim Coote <tim+vger.kernel....@coote.org>: > William > did you load your modules with debug=1, or something else, somehow? I > thought that the code printing out ds3000_readreg required debug. or have > you got different source code from the tevii driver on > www.tevii.com/Support.asp? (unless I know what you're using, I cannot tell > what's relevant.) > > my log looks like this (VMWare fusion virtual hardware, MacBookPro host, > xubuntu 10.04, installed and updated, make and sudo make install based on a > .config that I understand works). > > May 7 02:20:37 ubuntu kernel: [42761.520219] usb 1-1: new high speed USB > device using ehci_hcd and address 2 > May 7 02:20:37 ubuntu kernel: [42761.708776] usb 1-1: configuration #1 > chosen from 1 choice > May 7 02:20:37 ubuntu kernel: [42762.229009] dvb-usb: found a 'TeVii S660 > USB' in cold state, will try to load a firmware > May 7 02:20:37 ubuntu kernel: [42762.229027] usb 1-1: firmware: requesting > dvb-usb-teviis660.fw > May 7 02:20:38 ubuntu kernel: [42762.307947] dvb-usb: downloading firmware > from file 'dvb-usb-teviis660.fw' > May 7 02:20:38 ubuntu kernel: [42762.307950] dw2102: start downloading > DW210X firmware > May 7 02:20:38 ubuntu kernel: [42762.508553] usb 1-1: USB disconnect, > address 2 > May 7 02:20:38 ubuntu kernel: [42762.592094] dvb-usb: found a 'TeVii S660 > USB' in warm state. > May 7 02:20:38 ubuntu kernel: [42762.592253] dvb-usb: will pass the > complete MPEG2 transport stream to the software demuxer. > May 7 02:20:38 ubuntu kernel: [42762.592324] DVB: registering new adapter > (TeVii S660 USB) > May 7 02:20:42 ubuntu kernel: [42766.700222] dvb-usb: MAC address: > 00:00:00:00:00:00 > May 7 02:20:42 ubuntu kernel: [42766.778218] Only Zarlink > VP310/MT312/ZL10313 are supported chips. > May 7 02:20:42 ubuntu kernel: [42767.053874] input: IR-receiver inside an > USB DVB receiver as > /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/input/input5 > May 7 02:20:42 ubuntu kernel: [42767.054053] dvb-usb: schedule remote query > interval to 150 msecs. > May 7 02:20:42 ubuntu kernel: [42767.054058] dvb-usb: TeVii S660 USB > successfully initialized and connected. > May 7 02:20:42 ubuntu kernel: [42767.054088] usbcore: registered new > interface driver dw2102 > May 7 02:20:42 ubuntu kernel: [42767.054463] dvb-usb: TeVii S660 USB > successfully deinitialized and disconnected. > May 7 02:20:43 ubuntu kernel: [42767.340236] usb 1-1: new high speed USB > device using ehci_hcd and address 3 > May 7 02:20:43 ubuntu kernel: [42767.824316] usb 1-1: config 1 interface 0 > altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 > May 7 02:20:43 ubuntu kernel: [42767.828380] usb 1-1: configuration #1 > chosen from 1 choice > May 7 02:20:43 ubuntu kernel: [42768.068383] dvb-usb: found a 'TeVii S660 > USB' in cold state, will try to load a firmware > May 7 02:20:43 ubuntu kernel: [42768.068388] usb 1-1: firmware: requesting > dvb-usb-teviis660.fw > May 7 02:20:43 ubuntu kernel: [42768.087257] dvb-usb: downloading firmware > from file 'dvb-usb-teviis660.fw' > May 7 02:20:43 ubuntu kernel: [42768.087260] dw2102: start downloading > DW210X firmware > May 7 02:20:44 ubuntu kernel: [42768.360185] dvb-usb: found a 'TeVii S660 > USB' in warm state. > May 7 02:20:44 ubuntu kernel: [42768.361175] dvb-usb: will pass the > complete MPEG2 transport stream to the software demuxer. > May 7 02:20:44 ubuntu kernel: [42768.362197] DVB: registering new adapter > (TeVii S660 USB) > May 7 02:20:49 ubuntu kernel: [42773.580095] dvb-usb: MAC address: > 70:70:70:70:70:70 > May 7 02:20:49 ubuntu kernel: [42773.612787] Only Zarlink > VP310/MT312/ZL10313 are supported chips. > May 7 02:20:49 ubuntu kernel: [42773.875597] input: IR-receiver inside an > USB DVB receiver as > /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/input/input6 > May 7 02:20:49 ubuntu kernel: [42773.875684] dvb-usb: schedule remote query > interval to 150 msecs. > May 7 02:20:49 ubuntu kernel: [42773.875687] dvb-usb: TeVii S660 USB > successfully initialized and connected. > May 7 02:20:49 ubuntu kernel: [42774.024247] dw2102: query RC enter > > I'm not getting the 'probably not a ds3000' line, although that could be a > debugging level issue. > > I see that you're using a different kernel and source file: here's my > modinfo for the module that I'm using: > > filename: > /lib/modules/2.6.32-22-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dw2102.ko > license: GPL > version: 0.1 > description: Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C > 3101 USB2.0, TeVii S600, S630, S650, S660 USB2.0, Prof 1100, 7500 USB2.0 > devices > author: Igor M. Liplianin (c) liplia...@me.by > srcversion: 5B4AEEBD8B92549304CF812 > alias: usb:v3034p7500d*dc*dsc*dp*ic*isc*ip* > alias: usb:v9022pD660d*dc*dsc*dp*ic*isc*ip* > alias: usb:v3011pB012d*dc*dsc*dp*ic*isc*ip* > alias: usb:v9022pD630d*dc*dsc*dp*ic*isc*ip* > alias: usb:v04B4p3101d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp0064d*dc*dsc*dp*ic*isc*ip* > alias: usb:v9022pD650d*dc*dsc*dp*ic*isc*ip* > alias: usb:v04B4p2104d*dc*dsc*dp*ic*isc*ip* > alias: usb:v04B4p2101d*dc*dsc*dp*ic*isc*ip* > alias: usb:v04B4p2102d*dc*dsc*dp*ic*isc*ip* > depends: dvb-usb > vermagic: 2.6.32-22-generic SMP mod_unload modversions 586 > parm: debug:set debugging level (1=info 2=xfer 4=rc(or-able)). > (int) > parm: keymap:set keymap 0=default 1=dvbworld 2=tevii 3=tbs ... > (int) > parm: demod:demod to probe (1=cx24116 2=stv0903+stv6110 > 4=stv0903+stb6100(or-able)). (int) > parm: adapter_nr:DVB adapter numbers (array of short) > > > I'm not convinced that either of us is actually communicating with our > s660s. do you get a /dev/dvb/adapter0/frontend0? can you get any output at > all from the device? if so, with what? > > There are too many variables here. I'd like to collect all of the > configurations of a known working system and work methodically from there. > On 6 May 2010, at 20:09, william wrote: > >> Hello Tim, >> >> i also have a tevii s660 which i cannot get to work properly. >> >> i'm no programmer and nobody has given a reaction on my previous posts >> (debugging my tevii...). >> >> I get this in my log after getting the source from the linuxtv site with >> the driver igor wrote: >> >> >> [ 45.654362] dvb-usb: found a 'TeVii S660 USB' in cold state, will try >> to load a firmware >> [ 45.654379] usb 1-3: firmware: requesting dvb-usb-s630.fw >> [ 45.717438] dvb-usb: downloading firmware from file 'dvb-usb-s630.fw' >> [ 45.717450] dw2102: start downloading DW210X firmware >> [ 45.824245] usb 1-3: USB disconnect, address 3 >> [ 45.930055] dvb-usb: found a 'TeVii S660 USB' in warm state. >> [ 45.930167] dvb-usb: will pass the complete MPEG2 transport stream to >> the software demuxer. >> [ 45.930233] DVB: registering new adapter (TeVii S660 USB) >> [ 56.182533] dvb-usb: MAC address: 00:00:00:00:00:00 >> [ 56.262532] mt312: R(126): 00 >> [ 56.262543] Only Zarlink VP310/MT312/ZL10313 are supported chips. >> [ 56.607024] ds3000_attach >> [ 56.642535] ds3000_readreg: read reg 0x00, value 0x00 >> [ 56.642542] Invalid probe, probably not a DS3000 >> [ 56.642816] dvb-usb: no frontend was attached by 'TeVii S660 USB' >> [ 56.643037] input: IR-receiver inside an USB DVB receiver as >> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input5 >> [ 56.643189] dvb-usb: schedule remote query interval to 150 msecs. >> [ 56.643203] dvb-usb: TeVii S660 USB successfully initialized and >> connected. >> [ 56.643290] usbcore: registered new interface driver dw2102 >> [ 56.773230] dvb-usb: TeVii S660 USB successfully deinitialized and >> disconnected. >> [ 57.050043] usb 1-3: new high speed USB device using ehci_hcd and >> address 5 >> >> in my previous post i got a message that an mt312 chip was found and now >> it does not find anything. >> so now i don't have a dvb device at all. >> >> the firmware is from the drivers from tevii. I tried and the s630 firmware >> and later the s660 firmware renamed to s630 but none worked. >> >> After installing the driver/changing the firmware, I shutdown the computer >> removed the power from the tevii device and then replugged and started my >> computer again. >> >> ====== >> >> modinfo dvb-usb-dw2102 >> filename: >> /lib/modules/2.6.34-020634rc2-generic/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dw2102.ko >> license: GPL >> version: 0.1 >> description: Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C >> 3101 USB2.0, TeVii S600, S630, S650, S660 USB2.0, Prof 1100, 7500 USB2.0 >> devices >> author: Igor M. Liplianin (c) liplia...@me.by >> srcversion: FCBA4EFAEF1F6A88DC9F2DB >> alias: usb:v3034p7500d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v9022pD660d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v3011pB012d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v9022pD630d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v04B4p3101d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v0CCDp0064d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v9022pD650d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v04B4p2104d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v04B4p2101d*dc*dsc*dp*ic*isc*ip* >> alias: usb:v04B4p2102d*dc*dsc*dp*ic*isc*ip* >> depends: dvb-usb >> vermagic: 2.6.34-020634rc2-generic SMP mod_unload modversions >> parm: debug:set debugging level (1=info 2=xfer 4=rc(or-able)). >> (int) >> parm: keymap:set keymap 0=default 1=dvbworld 2=tevii 3=tbs ... >> (int) >> parm: demod:demod to probe (1=cx24116 2=stv0903+stv6110 >> 4=stv0903+stb6100(or-able)). (int) >> parm: adapter_nr:DVB adapter numbers (array of short) >> ======== >> >> if you need help testing i would be glad to help. >> >> The tevii drivers are working and also detect the mt312 chip. >> This driver does not, but i'm not very pleased about the driver from tevii >> because channel switch takes long and image quality is bad and my system >> get's slow/freezes. >> >> With kind regards >> >> William van de Velde >> >> On 05/06/2010 01:07 AM, Tim Coote wrote: >>> >>> Hullo >>> I've been struggling with this for a couple of days. I have checked >>> archives, but missed anything useful. >>> >>> I've got a tevii s660 (dvbs2 via usb). It works with some limitations on >>> windows xp (I cannot get HD signals decoded, but think that's a limitation >>> of the software that comes on the CD). >>> >>> I'm trying to get this working on Linux. I've tried VMs based on fedora >>> 12 and mythbuntu (VMWare Fusion on a MacBookPro, both based on kernel >>> 2.6.32), using the drivers from tevii's site (www.tevii.com/support.asp). >>> these drivers are slightly modified versions of the v4l tip - but don't >>> appear to be modified where I've not yet managed to get the drivers working >>> :-(. Mythbuntu seems to be closest to working. Goodness knows how tevii >>> tested the code, but it doesn't seem to work as far as I can see. My issues >>> could just be down to using a VM. >>> >>> I believe that I need to load up the modules ds3000 and dvb-usb-dw2102, + >>> add a rule to /etc/udev/rules.d and a script to /etc/udev/scripts. >>> >>> I think that I must be missing quite a lot of context, tho'. When I look >>> at the code in dw2102.c, which seems to support the s660, the bit that >>> downloads the firmware looks broken and if I add a default clause to the >>> switch that does the download, the s660's missed the download process. This >>> could be why when I do get anything out of the device it looks like I'm just >>> getting repeated bytes (the same value repeated, different values at >>> different times, sometimes nothing). I'm finding it non-trivial working out >>> the call sequences of the code or devising repeatable tests. >>> >>> Can anyone kick me off on getting this working? I'd like to at least get >>> to the point where scandvb can tune the device. It does look like some folk >>> have had success in the past, but probably with totally different codebase >>> (there are posts that refer to the teviis660 module, which I cannot find). >>> >>> Any pointer gratefully accepted. I'll feed back any success if I can be >>> pointed at where to drop document it. >>> >>> tia >>> >>> Tim >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-media" in >>> the body of a message to majord...@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Josu Lazkano -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html