On Fri, 2010-07-09 at 15:28 -0500, Kenney Phillisjr wrote: > I know this is an old thread, however i have an card that meets the > requirements to be tested by the patches made by andy, and so far > with what i've tried it's been doing really well for input. > > I pretty much just downloaded and tested Andy's patch set... > http://linuxtv.org/hg/~awalls/cx23885-ir2
I'll be porting most of these 32 patches forward to my v4l-dvb.git tree (on the cx-ir branch) later today. I need the I/O pin configuration stuff for the CX23885 and CX23888 IR transmitter pin configuration. Could you please provide a diff for the one change you mentioned on IRC about fixing Rx on the HVR-1250? > The tests where done on ubuntu 10.04 with kernel 2.6.32-23-generic > (64-bit) and this appears to be working perfectly. (This even properly > identifies the card I'm using down to the model) > > card notes: Hauppauge WinTV-HVR1250 (Model: 79001) I don't have an original HVR-1250 or any other card with a genuine CX23885 chip anymore, so I'll be unable to test. I will likely add a module parameter that end users will be required to set explcitly to enable the IR integrated in the CX23885 chip. Igor's testing with the TeVii S470 resulted in the infinite IR interrupts making his system unusable. Regards, Andy > oh and the only change i made to the test is i commented out the > 4 lines in the makefile that generate the firedtv module so i could > compile the tests > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html