Hello Jarkko,
On Sun, Jun 13, 2010 at 08:09:28PM +0200, Jarkko Nikula wrote:
> Convert the driver to use regulator framework instead of set_power callback.
> This with gpio_reset platform data provide cleaner way to manage chip VIO,
> VDD and reset signal inside the driver.
>
> Signed-off-by: Jarkko Nikula <[email protected]>
> Cc: Eduardo Valentin <[email protected]>
> ---
> I don't have specifications for this chip so I don't know how long the
> reset signal must be active after power-up. I used 50 us from Maemo
> kernel sources for Nokia N900 and I can successfully enable-disable
> transmitter on N900 with vdd power cycling.
> ---
> drivers/media/radio/radio-si4713.c | 20 ++++++++++++++-
> drivers/media/radio/si4713-i2c.c | 48 ++++++++++++++++++++++++++++-------
> drivers/media/radio/si4713-i2c.h | 3 +-
> include/media/si4713.h | 3 +-
Could you please elaborate a bit more on the fact that you have put vio on
the platform driver and vdd on the i2c driver?
> 4 files changed, 60 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/radio/radio-si4713.c
> b/drivers/media/radio/radio-si4713.c
> index 0a9fc4d..c666012 100644
> --- a/drivers/media/radio/radio-si4713.c
> +++ b/drivers/media/radio/radio-si4713.c
> @@ -28,6 +28,7 @@
> #include <linux/i2c.h>
> #include <linux/videodev2.h>
> #include <linux/slab.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-common.h>
> #include <media/v4l2-ioctl.h>
> @@ -48,6 +49,7 @@ MODULE_VERSION("0.0.1");
> struct radio_si4713_device {
> struct v4l2_device v4l2_dev;
> struct video_device *radio_dev;
> + struct regulator *reg_vio;
> };
>
> /* radio_si4713_fops - file operations interface */
> @@ -283,12 +285,22 @@ static int radio_si4713_pdriver_probe(struct
> platform_device *pdev)
> goto free_rsdev;
> }
>
> + rsdev->reg_vio = regulator_get(&pdev->dev, "vio");
> + if (IS_ERR(rsdev->reg_vio)) {
> + dev_err(&pdev->dev, "Cannot get vio regulator\n");
> + rval = PTR_ERR(rsdev->reg_vio);
> + goto unregister_v4l2_dev;
> + }
> + rval = regulator_enable(rsdev->reg_vio);
> + if (rval)
> + goto reg_put;
> +
> adapter = i2c_get_adapter(pdata->i2c_bus);
> if (!adapter) {
> dev_err(&pdev->dev, "Cannot get i2c adapter %d\n",
> pdata->i2c_bus);
> rval = -ENODEV;
> - goto unregister_v4l2_dev;
> + goto reg_disable;
> }
>
> sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, "si4713_i2c",
> @@ -322,6 +334,10 @@ free_vdev:
> video_device_release(rsdev->radio_dev);
> put_adapter:
> i2c_put_adapter(adapter);
> +reg_disable:
> + regulator_disable(rsdev->reg_vio);
> +reg_put:
> + regulator_put(rsdev->reg_vio);
> unregister_v4l2_dev:
> v4l2_device_unregister(&rsdev->v4l2_dev);
> free_rsdev:
> @@ -343,6 +359,8 @@ static int __exit radio_si4713_pdriver_remove(struct
> platform_device *pdev)
>
> video_unregister_device(rsdev->radio_dev);
> i2c_put_adapter(client->adapter);
> + regulator_disable(rsdev->reg_vio);
> + regulator_put(rsdev->reg_vio);
> v4l2_device_unregister(&rsdev->v4l2_dev);
> kfree(rsdev);
>
> diff --git a/drivers/media/radio/si4713-i2c.c
> b/drivers/media/radio/si4713-i2c.c
> index ab63dd5..4b5470c 100644
> --- a/drivers/media/radio/si4713-i2c.c
> +++ b/drivers/media/radio/si4713-i2c.c
> @@ -27,6 +27,8 @@
> #include <linux/interrupt.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-ioctl.h>
> #include <media/v4l2-common.h>
> @@ -369,7 +371,12 @@ static int si4713_powerup(struct si4713_device *sdev)
> if (sdev->power_state)
> return 0;
>
> - sdev->platform_data->set_power(1);
> + regulator_enable(sdev->reg_vdd);
> + if (gpio_is_valid(sdev->gpio_reset)) {
> + udelay(50);
> + gpio_set_value(sdev->gpio_reset, 1);
> + }
> +
> err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
> args, ARRAY_SIZE(args),
> resp, ARRAY_SIZE(resp),
> @@ -384,7 +391,9 @@ static int si4713_powerup(struct si4713_device *sdev)
> err = si4713_write_property(sdev, SI4713_GPO_IEN,
> SI4713_STC_INT | SI4713_CTS);
> } else {
> - sdev->platform_data->set_power(0);
> + if (gpio_is_valid(sdev->gpio_reset))
> + gpio_set_value(sdev->gpio_reset, 0);
> + regulator_disable(sdev->reg_vdd);
> }
>
> return err;
> @@ -411,7 +420,9 @@ static int si4713_powerdown(struct si4713_device *sdev)
> v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
> resp[0]);
> v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
> - sdev->platform_data->set_power(0);
> + if (gpio_is_valid(sdev->gpio_reset))
> + gpio_set_value(sdev->gpio_reset, 0);
> + regulator_disable(sdev->reg_vdd);
> sdev->power_state = POWER_OFF;
> }
>
> @@ -1959,6 +1970,7 @@ static int si4713_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct si4713_device *sdev;
> + struct si4713_platform_data *pdata = client->dev.platform_data;
> int rval;
>
> sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
> @@ -1968,11 +1980,20 @@ static int si4713_probe(struct i2c_client *client,
> goto exit;
> }
>
> - sdev->platform_data = client->dev.platform_data;
> - if (!sdev->platform_data) {
> - v4l2_err(&sdev->sd, "No platform data registered.\n");
> - rval = -ENODEV;
> - goto free_sdev;
> + sdev->gpio_reset = -1;
> + if (pdata && gpio_is_valid(pdata->gpio_reset)) {
> + rval = gpio_request(pdata->gpio_reset, "si4713 reset");
> + if (rval)
> + goto free_sdev;
> + sdev->gpio_reset = pdata->gpio_reset;
> + gpio_direction_output(sdev->gpio_reset, 0);
> + }
> +
> + sdev->reg_vdd = regulator_get(&client->dev, "vdd");
> + if (IS_ERR(sdev->reg_vdd)) {
> + dev_err(&client->dev, "Cannot get vdd regulator\n");
> + rval = PTR_ERR(sdev->reg_vdd);
> + goto free_gpio;
> }
>
> v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
> @@ -1986,7 +2007,7 @@ static int si4713_probe(struct i2c_client *client,
> client->name, sdev);
> if (rval < 0) {
> v4l2_err(&sdev->sd, "Could not request IRQ\n");
> - goto free_sdev;
> + goto put_reg;
> }
> v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
> } else {
> @@ -2004,6 +2025,11 @@ static int si4713_probe(struct i2c_client *client,
> free_irq:
> if (client->irq)
> free_irq(client->irq, sdev);
> +put_reg:
> + regulator_put(sdev->reg_vdd);
> +free_gpio:
> + if (gpio_is_valid(sdev->gpio_reset))
> + gpio_free(sdev->gpio_reset);
> free_sdev:
> kfree(sdev);
> exit:
> @@ -2023,7 +2049,9 @@ static int si4713_remove(struct i2c_client *client)
> free_irq(client->irq, sdev);
>
> v4l2_device_unregister_subdev(sd);
> -
> + regulator_put(sdev->reg_vdd);
> + if (gpio_is_valid(sdev->gpio_reset))
> + gpio_free(sdev->gpio_reset);
> kfree(sdev);
>
> return 0;
> diff --git a/drivers/media/radio/si4713-i2c.h
> b/drivers/media/radio/si4713-i2c.h
> index faf8cff..cf79f6e 100644
> --- a/drivers/media/radio/si4713-i2c.h
> +++ b/drivers/media/radio/si4713-i2c.h
> @@ -220,11 +220,12 @@ struct si4713_device {
> /* private data structures */
> struct mutex mutex;
> struct completion work;
> - struct si4713_platform_data *platform_data;
> struct rds_info rds_info;
> struct limiter_info limiter_info;
> struct pilot_info pilot_info;
> struct acomp_info acomp_info;
> + struct regulator *reg_vdd;
> + int gpio_reset;
> u32 frequency;
> u32 preemphasis;
> u32 mute;
> diff --git a/include/media/si4713.h b/include/media/si4713.h
> index 99850a5..ed7353e 100644
> --- a/include/media/si4713.h
> +++ b/include/media/si4713.h
> @@ -23,8 +23,7 @@
> * Platform dependent definition
> */
> struct si4713_platform_data {
> - /* Set power state, zero is off, non-zero is on. */
> - int (*set_power)(int power);
> + int gpio_reset; /* < 0 if not used */
> };
>
> /*
> --
> 1.7.1
--
---
Eduardo Valentin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
