Hi
I'm no developer but I can help test..... I have an Ubuntu 10.10 server and
have a Compro E750 dual DVB-T video card which isn't yet supported. I have 2
other tuners working in the machine so I'm happy to take some time to get this
new card going because I can live without it :)
What can I do to help?
A few bits of info...............
lshw
*-multimedia UNCLAIMED
description: Multimedia controller
product: SAA7160
vendor: Philips Semiconductors
physical id: 0
bus info: p...@0000:03:00.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pm bus_master cap_list
configuration: latency=0
resources: memory:dff00000-dfffffff
lspci
0000:03:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev
03)
Subsystem: Compro Technology, Inc. Device e750
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information: Len=50 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0
Len=088 <?>
vendor ID's -- 1131:7160 (rev 03)
Cheers
Marc
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
