The selection of 'helper' drivers for peripheral chips can be done either automatically by the config entry for the controller chip in a device (default if !EMBEDDED) or manually if the user knows exactly which peripheral chips are used.
The config entries for these helper drivers are completely hidden if automatic selection is enabled. However, the way that this is currently done results in a config dependency on manual selection, so Kconfig now warns of symbols being auto-selected without their dependencies being met. This changes all those config entries so that only their visibility depends on manual selection being enabled. It also necessarily removes some explicit menus, since explicit menus always result in a config dependency. Signed-off-by: Ben Hutchings <b...@decadent.org.uk> --- Mauro, please try to get this included in 2.6.37. Now that Kconfig warns about such conflicts, it results in an enormous amount of noise in an all-modules config. Ben. drivers/media/common/tuners/Kconfig | 61 ++++++---- drivers/media/dvb/frontends/Kconfig | 245 ++++++++++++++++++++++------------- drivers/media/video/Kconfig | 138 +++++++++++++------- drivers/media/video/cx25840/Kconfig | 3 +- 4 files changed, 287 insertions(+), 160 deletions(-) diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index 2385e6c..adac6cf 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -44,10 +44,9 @@ menuconfig MEDIA_TUNER_CUSTOMISE If unsure say N. -if MEDIA_TUNER_CUSTOMISE - config MEDIA_TUNER_SIMPLE - tristate "Simple tuner support" + tristate + prompt "Simple tuner support" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C select MEDIA_TUNER_TDA9887 default m if MEDIA_TUNER_CUSTOMISE @@ -55,7 +54,8 @@ config MEDIA_TUNER_SIMPLE Say Y here to include support for various simple tuners. config MEDIA_TUNER_TDA8290 - tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo" + tristate + prompt "TDA 8290/8295 + 8275(a)/18271 tuner combo" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C select MEDIA_TUNER_TDA827X select MEDIA_TUNER_TDA18271 @@ -64,21 +64,24 @@ config MEDIA_TUNER_TDA8290 Say Y here to include support for Philips TDA8290+8275(a) tuner. config MEDIA_TUNER_TDA827X - tristate "Philips TDA827X silicon tuner" + tristate + prompt "Philips TDA827X silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A DVB-T silicon tuner module. Say Y when you want to support this tuner. config MEDIA_TUNER_TDA18271 - tristate "NXP TDA18271 silicon tuner" + tristate + prompt "NXP TDA18271 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A silicon tuner module. Say Y when you want to support this tuner. config MEDIA_TUNER_TDA9887 - tristate "TDA 9885/6/7 analog IF demodulator" + tristate + prompt "TDA 9885/6/7 analog IF demodulator" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help @@ -86,7 +89,8 @@ config MEDIA_TUNER_TDA9887 analog IF demodulator. config MEDIA_TUNER_TEA5761 - tristate "TEA 5761 radio tuner (EXPERIMENTAL)" + tristate + prompt "TEA 5761 radio tuner (EXPERIMENTAL)" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C depends on EXPERIMENTAL default m if MEDIA_TUNER_CUSTOMISE @@ -94,56 +98,64 @@ config MEDIA_TUNER_TEA5761 Say Y here to include support for the Philips TEA5761 radio tuner. config MEDIA_TUNER_TEA5767 - tristate "TEA 5767 radio tuner" + tristate + prompt "TEA 5767 radio tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help Say Y here to include support for the Philips TEA5767 radio tuner. config MEDIA_TUNER_MT20XX - tristate "Microtune 2032 / 2050 tuners" + tristate + prompt "Microtune 2032 / 2050 tuners" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help Say Y here to include support for the MT2032 / MT2050 tuner. config MEDIA_TUNER_MT2060 - tristate "Microtune MT2060 silicon IF tuner" + tristate + prompt "Microtune MT2060 silicon IF tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon IF tuner MT2060 from Microtune. config MEDIA_TUNER_MT2266 - tristate "Microtune MT2266 silicon tuner" + tristate + prompt "Microtune MT2266 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon baseband tuner MT2266 from Microtune. config MEDIA_TUNER_MT2131 - tristate "Microtune MT2131 silicon tuner" + tristate + prompt "Microtune MT2131 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon baseband tuner MT2131 from Microtune. config MEDIA_TUNER_QT1010 - tristate "Quantek QT1010 silicon tuner" + tristate + prompt "Quantek QT1010 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon tuner QT1010 from Quantek. config MEDIA_TUNER_XC2028 - tristate "XCeive xc2028/xc3028 tuners" + tristate + prompt "XCeive xc2028/xc3028 tuners" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help Say Y here to include support for the xc2028/xc3028 tuners. config MEDIA_TUNER_XC5000 - tristate "Xceive XC5000 silicon tuner" + tristate + prompt "Xceive XC5000 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help @@ -152,38 +164,41 @@ config MEDIA_TUNER_XC5000 demodulator for now. config MEDIA_TUNER_MXL5005S - tristate "MaxLinear MSL5005S silicon tuner" + tristate + prompt "MaxLinear MSL5005S silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon tuner MXL5005S from MaxLinear. config MEDIA_TUNER_MXL5007T - tristate "MaxLinear MxL5007T silicon tuner" + tristate + prompt "MaxLinear MxL5007T silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon tuner MxL5007T from MaxLinear. config MEDIA_TUNER_MC44S803 - tristate "Freescale MC44S803 Low Power CMOS Broadband tuners" + tristate + prompt "Freescale MC44S803 Low Power CMOS Broadband tuners" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help Say Y here to support the Freescale MC44S803 based tuners config MEDIA_TUNER_MAX2165 - tristate "Maxim MAX2165 silicon tuner" + tristate + prompt "Maxim MAX2165 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help A driver for the silicon tuner MAX2165 from Maxim. config MEDIA_TUNER_TDA18218 - tristate "NXP TDA18218 silicon tuner" + tristate + prompt "NXP TDA18218 silicon tuner" if MEDIA_TUNER_CUSTOMISE depends on VIDEO_MEDIA && I2C default m if MEDIA_TUNER_CUSTOMISE help NXP TDA18218 silicon tuner driver. - -endif # MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index e9062b0..476836d 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -1,4 +1,4 @@ -config DVB_FE_CUSTOMISE +menuconfig DVB_FE_CUSTOMISE bool "Customise the frontend modules to build" depends on DVB_CORE default y if EMBEDDED @@ -12,15 +12,12 @@ config DVB_FE_CUSTOMISE If unsure say N. -if DVB_FE_CUSTOMISE - -menu "Customise DVB Frontends" - comment "Multistandard (satellite) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_STB0899 - tristate "STB0899 based" + tristate + prompt "STB0899 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -28,7 +25,8 @@ config DVB_STB0899 to support this demodulator based frontends config DVB_STB6100 - tristate "STB6100 based tuners" + tristate + prompt "STB6100 based tuners" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -36,7 +34,8 @@ config DVB_STB6100 demodulator. Say Y when you want to support this tuner. config DVB_STV090x - tristate "STV0900/STV0903(A/B) based" + tristate + prompt "STV0900/STV0903(A/B) based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -44,129 +43,147 @@ config DVB_STV090x Say Y when you want to support these frontends. config DVB_STV6110x - tristate "STV6110/(A) based tuners" + tristate + prompt "STV6110/(A) based tuners" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A Silicon tuner that supports DVB-S and DVB-S2 modes comment "DVB-S (satellite) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_CX24110 - tristate "Conexant CX24110 based" + tristate + prompt "Conexant CX24110 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24123 - tristate "Conexant CX24123 based" + tristate + prompt "Conexant CX24123 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_MT312 - tristate "Zarlink VP310/MT312/ZL10313 based" + tristate + prompt "Zarlink VP310/MT312/ZL10313 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_ZL10036 - tristate "Zarlink ZL10036 silicon tuner" + tristate + prompt "Zarlink ZL10036 silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_ZL10039 - tristate "Zarlink ZL10039 silicon tuner" + tristate + prompt "Zarlink ZL10039 silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_S5H1420 - tristate "Samsung S5H1420 based" + tristate + prompt "Samsung S5H1420 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STV0288 - tristate "ST STV0288 based" + tristate + prompt "ST STV0288 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STB6000 - tristate "ST STB6000 silicon tuner" + tristate + prompt "ST STB6000 silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_STV0299 - tristate "ST STV0299 based" + tristate + prompt "ST STV0299 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_STV6110 - tristate "ST STV6110 silicon tuner" + tristate + prompt "ST STV6110 silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_STV0900 - tristate "ST STV0900 based" + tristate + prompt "ST STV0900 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S/S2 demodulator. Say Y when you want to support this frontend. config DVB_TDA8083 - tristate "Philips TDA8083 based" + tristate + prompt "Philips TDA8083 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA10086 - tristate "Philips TDA10086 based" + tristate + prompt "Philips TDA10086 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA8261 - tristate "Philips TDA8261 based" + tristate + prompt "Philips TDA8261 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_VES1X93 - tristate "VLSI VES1893 or VES1993 based" + tristate + prompt "VLSI VES1893 or VES1993 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TUNER_ITD1000 - tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" + tristate + prompt "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TUNER_CX24113 - tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS" + tristate + prompt "Conexant CX24113/CX24128 tuner for DVB-S/DSS" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -174,42 +191,48 @@ config DVB_TUNER_CX24113 config DVB_TDA826X - tristate "Philips TDA826X silicon tuner" + tristate + prompt "Philips TDA826X silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S silicon tuner module. Say Y when you want to support this tuner. config DVB_TUA6100 - tristate "Infineon TUA6100 PLL" + tristate + prompt "Infineon TUA6100 PLL" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S PLL chip. config DVB_CX24116 - tristate "Conexant CX24116 based" + tristate + prompt "Conexant CX24116 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. config DVB_SI21XX - tristate "Silicon Labs SI21XX based" + tristate + prompt "Silicon Labs SI21XX based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_DS3000 - tristate "Montage Tehnology DS3000 based" + tristate + prompt "Montage Tehnology DS3000 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. config DVB_MB86A16 - tristate "Fujitsu MB86A16 based" + tristate + prompt "Fujitsu MB86A16 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -217,10 +240,11 @@ config DVB_MB86A16 Say Y when you want to support this frontend. comment "DVB-T (terrestrial) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_SP8870 - tristate "Spase sp8870 based" + tristate + prompt "Spase sp8870 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -232,7 +256,8 @@ config DVB_SP8870 or /lib/firmware (depending on configuration of firmware hotplug). config DVB_SP887X - tristate "Spase sp887x based" + tristate + prompt "Spase sp887x based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -244,28 +269,32 @@ config DVB_SP887X or /lib/firmware (depending on configuration of firmware hotplug). config DVB_CX22700 - tristate "Conexant CX22700 based" + tristate + prompt "Conexant CX22700 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_CX22702 - tristate "Conexant cx22702 demodulator (OFDM)" + tristate + prompt "Conexant cx22702 demodulator (OFDM)" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_S5H1432 - tristate "Samsung s5h1432 demodulator (OFDM)" + tristate + prompt "Samsung s5h1432 demodulator (OFDM)" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DRX397XD - tristate "Micronas DRX3975D/DRX3977D based" + tristate + prompt "Micronas DRX3975D/DRX3977D based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -278,14 +307,16 @@ config DVB_DRX397XD or /lib/firmware (depending on configuration of firmware hotplug). config DVB_L64781 - tristate "LSI L64781" + tristate + prompt "LSI L64781" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_TDA1004X - tristate "Philips TDA10045H/TDA10046H based" + tristate + prompt "Philips TDA10045H/TDA10046H based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -298,28 +329,32 @@ config DVB_TDA1004X or /lib/firmware (depending on configuration of firmware hotplug). config DVB_NXT6000 - tristate "NxtWave Communications NXT6000 based" + tristate + prompt "NxtWave Communications NXT6000 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_MT352 - tristate "Zarlink MT352 based" + tristate + prompt "Zarlink MT352 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_ZL10353 - tristate "Zarlink ZL10353 based" + tristate + prompt "Zarlink ZL10353 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DIB3000MB - tristate "DiBcom 3000M-B" + tristate + prompt "DiBcom 3000M-B" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -327,7 +362,8 @@ config DVB_DIB3000MB to support this frontend. config DVB_DIB3000MC - tristate "DiBcom 3000P/M-C" + tristate + prompt "DiBcom 3000P/M-C" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -335,7 +371,8 @@ config DVB_DIB3000MC to support this frontend. config DVB_DIB7000M - tristate "DiBcom 7000MA/MB/PA/PB/MC" + tristate + prompt "DiBcom 7000MA/MB/PA/PB/MC" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -343,7 +380,8 @@ config DVB_DIB7000M to support this frontend. config DVB_DIB7000P - tristate "DiBcom 7000PC" + tristate + prompt "DiBcom 7000PC" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -351,62 +389,70 @@ config DVB_DIB7000P to support this frontend. config DVB_TDA10048 - tristate "Philips TDA10048HN based" + tristate + prompt "Philips TDA10048HN based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_AF9013 - tristate "Afatech AF9013 demodulator" + tristate + prompt "Afatech AF9013 demodulator" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help Say Y when you want to support this frontend. config DVB_EC100 - tristate "E3C EC100" + tristate + prompt "E3C EC100" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help Say Y when you want to support this frontend. comment "DVB-C (cable) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_VES1820 - tristate "VLSI VES1820 based" + tristate + prompt "VLSI VES1820 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10021 - tristate "Philips TDA10021 based" + tristate + prompt "Philips TDA10021 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10023 - tristate "Philips TDA10023 based" + tristate + prompt "Philips TDA10023 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_STV0297 - tristate "ST STV0297 based" + tristate + prompt "ST STV0297 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_NXT200X - tristate "NxtWave Communications NXT2002/NXT2004 based" + tristate + prompt "NxtWave Communications NXT2002/NXT2004 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -420,7 +466,8 @@ config DVB_NXT200X or /lib/firmware (depending on configuration of firmware hotplug). config DVB_OR51211 - tristate "Oren OR51211 based" + tristate + prompt "Oren OR51211 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -432,7 +479,8 @@ config DVB_OR51211 or /lib/firmware (depending on configuration of firmware hotplug). config DVB_OR51132 - tristate "Oren OR51132 based" + tristate + prompt "Oren OR51132 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -447,7 +495,8 @@ config DVB_OR51132 configuration of firmware hotplug). config DVB_BCM3510 - tristate "Broadcom BCM3510" + tristate + prompt "Broadcom BCM3510" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -455,7 +504,8 @@ config DVB_BCM3510 support this frontend. config DVB_LGDT330X - tristate "LG Electronics LGDT3302/LGDT3303 based" + tristate + prompt "LG Electronics LGDT3302/LGDT3303 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -463,7 +513,8 @@ config DVB_LGDT330X to support this frontend. config DVB_LGDT3305 - tristate "LG Electronics LGDT3304 and LGDT3305 based" + tristate + prompt "LG Electronics LGDT3304 and LGDT3305 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -471,7 +522,8 @@ config DVB_LGDT3305 to support this frontend. config DVB_S5H1409 - tristate "Samsung S5H1409 based" + tristate + prompt "Samsung S5H1409 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -479,7 +531,8 @@ config DVB_S5H1409 to support this frontend. config DVB_AU8522 - tristate "Auvitek AU8522 based" + tristate + prompt "Auvitek AU8522 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C && VIDEO_V4L2 default m if DVB_FE_CUSTOMISE help @@ -487,7 +540,8 @@ config DVB_AU8522 to support this frontend. config DVB_S5H1411 - tristate "Samsung S5H1411 based" + tristate + prompt "Samsung S5H1411 based" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -495,10 +549,11 @@ config DVB_S5H1411 to support this frontend. comment "ISDB-T (terrestrial) frontends" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_S921 - tristate "Sharp S921 tuner" + tristate + prompt "Sharp S921 tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -506,7 +561,8 @@ config DVB_S921 Say Y when you want to support this frontend. config DVB_DIB8000 - tristate "DiBcom 8000MB/MC" + tristate + prompt "DiBcom 8000MB/MC" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -514,10 +570,11 @@ config DVB_DIB8000 Say Y when you want to support this frontend. comment "Digital terrestrial only tuners/PLL" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_PLL - tristate "Generic I2C PLL based tuners" + tristate + prompt "Generic I2C PLL based tuners" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -525,7 +582,8 @@ config DVB_PLL common I2C interface. Say Y when you want to support these tuners. config DVB_TUNER_DIB0070 - tristate "DiBcom DiB0070 silicon base-band tuner" + tristate + prompt "DiBcom DiB0070 silicon base-band tuner" if DVB_FE_CUSTOMISE depends on I2C default m if DVB_FE_CUSTOMISE help @@ -534,7 +592,8 @@ config DVB_TUNER_DIB0070 demodulator for now. config DVB_TUNER_DIB0090 - tristate "DiBcom DiB0090 silicon base-band tuner" + tristate + prompt "DiBcom DiB0090 silicon base-band tuner" if DVB_FE_CUSTOMISE depends on I2C default m if DVB_FE_CUSTOMISE help @@ -543,45 +602,51 @@ config DVB_TUNER_DIB0090 demodulator for now. comment "SEC control devices for DVB-S" - depends on DVB_CORE + depends on DVB_CORE && DVB_FE_CUSTOMISE config DVB_LNBP21 - tristate "LNBP21/LNBH24 SEC controllers" + tristate + prompt "LNBP21/LNBH24 SEC controllers" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chips. config DVB_ISL6405 - tristate "ISL6405 SEC controller" + tristate + prompt "ISL6405 SEC controller" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chip. config DVB_ISL6421 - tristate "ISL6421 SEC controller" + tristate + prompt "ISL6421 SEC controller" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chip. config DVB_ISL6423 - tristate "ISL6423 SEC controller" + tristate + prompt "ISL6423 SEC controller" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A SEC controller chip from Intersil config DVB_LGS8GL5 - tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + tristate + prompt "Silicon Legend LGS-8GL5 demodulator (OFDM)" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DMB-TH tuner module. Say Y when you want to support this frontend. config DVB_LGS8GXX - tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" + tristate + prompt "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C select FW_LOADER default m if DVB_FE_CUSTOMISE @@ -589,14 +654,16 @@ config DVB_LGS8GXX A DMB-TH tuner module. Say Y when you want to support this frontend. config DVB_ATBM8830 - tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator" + tristate + prompt "AltoBeam ATBM8830/8831 DMB-TH demodulator" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DMB-TH tuner module. Say Y when you want to support this frontend. config DVB_TDA665x - tristate "TDA665x tuner" + tristate + prompt "TDA665x tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help @@ -607,17 +674,17 @@ config DVB_TDA665x * Panasonic ENV57H12D5 (ET-50DT) config DVB_IX2505V - tristate "Sharp IX2505V silicon tuner" + tristate + prompt "Sharp IX2505V silicon tuner" if DVB_FE_CUSTOMISE depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. comment "Tools to develop new frontends" + depends on DVB_FE_CUSTOMISE config DVB_DUMMY_FE - tristate "Dummy frontend driver" + tristate + prompt "Dummy frontend driver" if DVB_FE_CUSTOMISE default n -endmenu - -endif diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ac16e81..ea77fae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -95,7 +95,8 @@ config VIDEO_HELPER_CHIPS_AUTO In doubt, say Y. config VIDEO_IR_I2C - tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO + tristate + prompt "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C && VIDEO_IR default y ---help--- @@ -111,13 +112,12 @@ config VIDEO_IR_I2C # Encoder / Decoder module configuration # -menu "Encoders/decoders and other helper chips" - depends on !VIDEO_HELPER_CHIPS_AUTO - comment "Audio decoders" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_TVAUDIO - tristate "Simple audio decoder chips" + tristate + prompt "Simple audio decoder chips" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for several audio decoder chips found on some bt8xx boards: @@ -129,7 +129,8 @@ config VIDEO_TVAUDIO module will be called tvaudio. config VIDEO_TDA7432 - tristate "Philips TDA7432 audio processor" + tristate + prompt "Philips TDA7432 audio processor" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for tda7432 audio decoder chip found on some bt8xx boards. @@ -138,7 +139,8 @@ config VIDEO_TDA7432 module will be called tda7432. config VIDEO_TDA9840 - tristate "Philips TDA9840 audio processor" + tristate + prompt "Philips TDA9840 audio processor" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C ---help--- Support for tda9840 audio decoder chip found on some Zoran boards. @@ -147,7 +149,8 @@ config VIDEO_TDA9840 module will be called tda9840. config VIDEO_TDA9875 - tristate "Philips TDA9875 audio processor" + tristate + prompt "Philips TDA9875 audio processor" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for tda9875 audio decoder chip found on some bt8xx boards. @@ -156,7 +159,8 @@ config VIDEO_TDA9875 module will be called tda9875. config VIDEO_TEA6415C - tristate "Philips TEA6415C audio processor" + tristate + prompt "Philips TEA6415C audio processor" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C ---help--- Support for tea6415c audio decoder chip found on some bt8xx boards. @@ -165,7 +169,8 @@ config VIDEO_TEA6415C module will be called tea6415c. config VIDEO_TEA6420 - tristate "Philips TEA6420 audio processor" + tristate + prompt "Philips TEA6420 audio processor" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C ---help--- Support for tea6420 audio decoder chip found on some bt8xx boards. @@ -174,7 +179,8 @@ config VIDEO_TEA6420 module will be called tea6420. config VIDEO_MSP3400 - tristate "Micronas MSP34xx audio decoders" + tristate + prompt "Micronas MSP34xx audio decoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Micronas MSP34xx series of audio decoders. @@ -183,7 +189,8 @@ config VIDEO_MSP3400 module will be called msp3400. config VIDEO_CS5345 - tristate "Cirrus Logic CS5345 audio ADC" + tristate + prompt "Cirrus Logic CS5345 audio ADC" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Cirrus Logic CS5345 24-bit, 192 kHz @@ -193,7 +200,8 @@ config VIDEO_CS5345 module will be called cs5345. config VIDEO_CS53L32A - tristate "Cirrus Logic CS53L32A audio ADC" + tristate + prompt "Cirrus Logic CS53L32A audio ADC" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Cirrus Logic CS53L32A low voltage @@ -203,7 +211,8 @@ config VIDEO_CS53L32A module will be called cs53l32a. config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" + tristate + prompt "Mitsubishi M52790 A/V switch" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Mitsubishi M52790 A/V switch. @@ -212,7 +221,8 @@ config VIDEO_M52790 module will be called m52790. config VIDEO_TLV320AIC23B - tristate "Texas Instruments TLV320AIC23B audio codec" + tristate + prompt "Texas Instruments TLV320AIC23B audio codec" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C && EXPERIMENTAL ---help--- Support for the Texas Instruments TLV320AIC23B audio codec. @@ -221,7 +231,8 @@ config VIDEO_TLV320AIC23B module will be called tlv320aic23b. config VIDEO_WM8775 - tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + tristate + prompt "Wolfson Microelectronics WM8775 audio ADC with input mixer" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Wolfson Microelectronics WM8775 high @@ -231,7 +242,8 @@ config VIDEO_WM8775 module will be called wm8775. config VIDEO_WM8739 - tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + tristate + prompt "Wolfson Microelectronics WM8739 stereo audio ADC" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Wolfson Microelectronics WM8739 @@ -241,7 +253,8 @@ config VIDEO_WM8739 module will be called wm8739. config VIDEO_VP27SMPX - tristate "Panasonic VP27s internal MPX" + tristate + prompt "Panasonic VP27s internal MPX" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the internal MPX of the Panasonic VP27s tuner. @@ -250,9 +263,11 @@ config VIDEO_VP27SMPX module will be called vp27smpx. comment "RDS decoders" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_SAA6588 - tristate "SAA6588 Radio Chip RDS decoder support" + tristate + prompt "SAA6588 Radio Chip RDS decoder support" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C help @@ -264,9 +279,11 @@ config VIDEO_SAA6588 module will be called saa6588. comment "Video decoders" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_ADV7180 - tristate "Analog Devices ADV7180 decoder" + tristate + prompt "Analog Devices ADV7180 decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7180 video decoder. @@ -275,7 +292,8 @@ config VIDEO_ADV7180 module will be called adv7180. config VIDEO_BT819 - tristate "BT819A VideoStream decoder" + tristate + prompt "BT819A VideoStream decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for BT819A video decoder. @@ -284,7 +302,8 @@ config VIDEO_BT819 module will be called bt819. config VIDEO_BT856 - tristate "BT856 VideoStream decoder" + tristate + prompt "BT856 VideoStream decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for BT856 video decoder. @@ -293,7 +312,8 @@ config VIDEO_BT856 module will be called bt856. config VIDEO_BT866 - tristate "BT866 VideoStream decoder" + tristate + prompt "BT866 VideoStream decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for BT866 video decoder. @@ -302,7 +322,8 @@ config VIDEO_BT866 module will be called bt866. config VIDEO_KS0127 - tristate "KS0127 video decoder" + tristate + prompt "KS0127 video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for KS0127 video decoder. @@ -314,7 +335,8 @@ config VIDEO_KS0127 module will be called ks0127. config VIDEO_OV7670 - tristate "OmniVision OV7670 sensor support" + tristate + prompt "OmniVision OV7670 sensor support" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C && VIDEO_V4L2 ---help--- This is a Video4Linux2 sensor-level driver for the OmniVision @@ -322,7 +344,8 @@ config VIDEO_OV7670 controller. config VIDEO_MT9V011 - tristate "Micron mt9v011 sensor support" + tristate + prompt "Micron mt9v011 sensor support" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C && VIDEO_V4L2 ---help--- This is a Video4Linux2 sensor-level driver for the Micron @@ -330,14 +353,16 @@ config VIDEO_MT9V011 em28xx driver. config VIDEO_TCM825X - tristate "TCM825x camera sensor support" + tristate + prompt "TCM825x camera sensor support" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C && VIDEO_V4L2 ---help--- This is a driver for the Toshiba TCM825x VGA camera sensor. It is used for example in Nokia N800. config VIDEO_SAA7110 - tristate "Philips SAA7110 video decoder" + tristate + prompt "Philips SAA7110 video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7110 video decoders. @@ -346,7 +371,8 @@ config VIDEO_SAA7110 module will be called saa7110. config VIDEO_SAA711X - tristate "Philips SAA7111/3/4/5 video decoders" + tristate + prompt "Philips SAA7111/3/4/5 video decoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7111/3/4/5 video decoders. @@ -355,7 +381,8 @@ config VIDEO_SAA711X module will be called saa7115. config VIDEO_SAA717X - tristate "Philips SAA7171/3/4 audio/video decoders" + tristate + prompt "Philips SAA7171/3/4 audio/video decoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7171/3/4 audio/video decoders. @@ -364,7 +391,8 @@ config VIDEO_SAA717X module will be called saa717x. config VIDEO_SAA7191 - tristate "Philips SAA7191 video decoder" + tristate + prompt "Philips SAA7191 video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7191 video decoder. @@ -373,7 +401,8 @@ config VIDEO_SAA7191 module will be called saa7191. config VIDEO_TVP514X - tristate "Texas Instruments TVP514x video decoder" + tristate + prompt "Texas Instruments TVP514x video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 @@ -384,7 +413,8 @@ config VIDEO_TVP514X module will be called tvp514x. config VIDEO_TVP5150 - tristate "Texas Instruments TVP5150 video decoder" + tristate + prompt "Texas Instruments TVP5150 video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Texas Instruments TVP5150 video decoder. @@ -393,7 +423,8 @@ config VIDEO_TVP5150 module will be called tvp5150. config VIDEO_TVP7002 - tristate "Texas Instruments TVP7002 video decoder" + tristate + prompt "Texas Instruments TVP7002 video decoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Texas Instruments TVP7002 video decoder. @@ -402,7 +433,8 @@ config VIDEO_TVP7002 module will be called tvp7002. config VIDEO_VPX3220 - tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + tristate + prompt "vpx3220a, vpx3216b & vpx3214c video decoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for VPX322x video decoders. @@ -411,13 +443,16 @@ config VIDEO_VPX3220 module will be called vpx3220. comment "Video and audio decoders" + depends on !VIDEO_HELPER_CHIPS_AUTO source "drivers/media/video/cx25840/Kconfig" comment "MPEG video encoders" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_CX2341X - tristate "Conexant CX2341x MPEG encoders" + tristate + prompt "Conexant CX2341x MPEG encoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON ---help--- Support for the Conexant CX23416 MPEG encoders @@ -429,9 +464,11 @@ config VIDEO_CX2341X module will be called cx2341x. comment "Video encoders" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_SAA7127 - tristate "Philips SAA7127/9 digital video encoders" + tristate + prompt "Philips SAA7127/9 digital video encoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7127/9 digital video encoders. @@ -440,7 +477,8 @@ config VIDEO_SAA7127 module will be called saa7127. config VIDEO_SAA7185 - tristate "Philips SAA7185 video encoder" + tristate + prompt "Philips SAA7185 video encoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7185 video encoder. @@ -449,7 +487,8 @@ config VIDEO_SAA7185 module will be called saa7185. config VIDEO_ADV7170 - tristate "Analog Devices ADV7170 video encoder" + tristate + prompt "Analog Devices ADV7170 video encoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7170 video encoder driver @@ -458,7 +497,8 @@ config VIDEO_ADV7170 module will be called adv7170. config VIDEO_ADV7175 - tristate "Analog Devices ADV7175 video encoder" + tristate + prompt "Analog Devices ADV7175 video encoder" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7175 video encoder driver @@ -467,7 +507,8 @@ config VIDEO_ADV7175 module will be called adv7175. config VIDEO_THS7303 - tristate "THS7303 Video Amplifier" + tristate + prompt "THS7303 Video Amplifier" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C help Support for TI THS7303 video amplifier @@ -476,7 +517,8 @@ config VIDEO_THS7303 module will be called ths7303. config VIDEO_ADV7343 - tristate "ADV7343 video encoder" + tristate + prompt "ADV7343 video encoder" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C help Support for Analog Devices I2C bus based ADV7343 encoder. @@ -485,15 +527,18 @@ config VIDEO_ADV7343 module will be called adv7343. config VIDEO_AK881X - tristate "AK8813/AK8814 video encoders" + tristate + prompt "AK8813/AK8814 video encoders" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C help Video output driver for AKM AK8813 and AK8814 TV encoders comment "Video improvement chips" + depends on !VIDEO_HELPER_CHIPS_AUTO config VIDEO_UPD64031A - tristate "NEC Electronics uPD64031A Ghost Reduction" + tristate + prompt "NEC Electronics uPD64031A Ghost Reduction" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the NEC Electronics uPD64031A Ghost Reduction @@ -505,7 +550,8 @@ config VIDEO_UPD64031A module will be called upd64031a. config VIDEO_UPD64083 - tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + tristate + prompt "NEC Electronics uPD64083 3-Dimensional Y/C separation" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the NEC Electronics uPD64083 3-Dimensional Y/C @@ -515,8 +561,6 @@ config VIDEO_UPD64083 To compile this driver as a module, choose M here: the module will be called upd64083. -endmenu # encoder / decoder chips - config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig index 451133a..3d76fa6 100644 --- a/drivers/media/video/cx25840/Kconfig +++ b/drivers/media/video/cx25840/Kconfig @@ -1,5 +1,6 @@ config VIDEO_CX25840 - tristate "Conexant CX2584x audio/video decoders" + tristate + prompt "Conexant CX2584x audio/video decoders" if !VIDEO_HELPER_CHIPS_AUTO depends on VIDEO_V4L2 && I2C ---help--- Support for the Conexant CX2584x audio/video decoders. -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html