Sergei, Thank you for your comments. Will send a corrected pacth. -Manju On Thu, Dec 09, 2010 at 17:42:00, Sergei Shtylyov wrote: > Hello. > > On 02-12-2010 15:39, Manjunath Hadli wrote: > > > This patch adds the build infra-structure for Davinci VPBE dislay > > driver > > > Signed-off-by: Manjunath Hadli<manjunath.ha...@ti.com> > > Signed-off-by: Muralidharan Karicheri<m-kariche...@ti.com> > [...] > > > diff --git a/drivers/media/video/davinci/Kconfig > > b/drivers/media/video/davinci/Kconfig > > index 6b19540..dab32d5 100644 > > --- a/drivers/media/video/davinci/Kconfig > > +++ b/drivers/media/video/davinci/Kconfig > > @@ -91,3 +91,25 @@ config VIDEO_ISIF > > > > To compile this driver as a module, choose M here: the > > module will be called vpfe. > > + > > +config VIDEO_DM644X_VPBE > > + tristate "DM644X VPBE HW module" > > + select VIDEO_VPSS_SYSTEM > > + select VIDEOBUF_DMA_CONTIG > > Please use tabs uniformly to indent. > > > diff --git a/drivers/media/video/davinci/davinci_vpbe_readme.txt > > b/drivers/media/video/davinci/davinci_vpbe_readme.txt > > new file mode 100644 > > index 0000000..e7aabba > > --- /dev/null > > +++ b/drivers/media/video/davinci/davinci_vpbe_readme.txt > > @@ -0,0 +1,100 @@ > > + > > + VPBE V4L2 driver design > > + ==================================================================== > > + == > > + > > + File partitioning > > + ----------------- > > + V4L2 display device driver > > + drivers/media/video/davinci/vpbe_display.c > > + drivers/media/video/davinci/vpbe_display.h > > + > > + VPBE display controller > > + drivers/media/video/davinci/vpbe.c > > + drivers/media/video/davinci/vpbe.h > > + > > + VPBE venc sub device driver > > + drivers/media/video/davinci/vpbe_venc.c > > + drivers/media/video/davinci/vpbe_venc.h > > + drivers/media/video/davinci/vpbe_venc_regs.h > > + > > + VPBE osd driver > > + drivers/media/video/davinci/vpbe_osd.c > > + drivers/media/video/davinci/vpbe_osd.h > > + drivers/media/video/davinci/vpbe_osd_regs.h > > + > > + Functional partitioning > > + ----------------------- > > + > > + Consists of following (in the same order as the list under file > ^ "the" missing. > > > + partitioning):- > > + > > + 1. V4L2 display driver > > + Implements video2 and video3 device nodes and > > + provides v4l2 device interface to manage VID0 and VID1 layers. > > + > > + 2. Display controller > > + Loads up venc, osd and external encoders such as ths8200. It provides > > + a set of API calls to V4L2 drivers to set the output/standards > > + in the venc or external sub devices. It also provides > > + a device object to access the services from osd sub device > > + using sub device ops. The connection of external encoders to venc LCD > > + controller port is done at init time based on default output and > > standard > > + selection or at run time when application change the output through > > + V4L2 IOCTLs. > > + > > + When connetected to an external encoder, vpbe controller is also > > responsible > > + for setting up the interface between venc and external encoders based > > on > > + board specific settings (specified in board-xxx-evm.c). This > > + allowes > > Only "allows". > > > + interfacing external encoders such as ths8200. The setup_if_config() > > + is implemented for this as well as configure_venc() (part of the next > > patch) > > + API to set timings in venc for a specific display resolution.As > > + of this > > Space missing after period. > > > + patch series, the interconnection and enabling ans setting of the > > external > > + encoders is not present, and would be a part of the next patch series. > > + > > + 3. Venc sub device > > + Responsible for setting outputs provides > > Provided? > > > through internal dacs and also > > DACs. > > > + setting timings at LCD controller port when external encoders are > > connected > > + at the port or LCD panel timings required. When external encoder/LCD > > panel > > + is connected, the timings for a specific standard/preset is retrieved > > from > > + the board specific table and the values are used to set the timings in > > + venc using non-standard timing mode. > > + > > + Support LCD Panel displays using the venc. For example to support a > > Logic > > + PD display, it requires setting up the LCD controller port with a set > > of > > + timings for the resolution supported and setting the dot clock. So we > > could > > + add the available outputs as a board specific entry ( i.e add the > > "LogicPD" > > Space not needed after (. > > > + output name to board-xxx-evm.c). A table of timings for various LCDs > > + supported cab > > Can? > > > be maintained in the board specific setup file to support > > + various LCD displays. > > + > > + 4. osd sub device > > OSD? What doesn it mean BTW? > > > + Osd sub device implements all osd layer management and hardware > > specific > > + features. In the legacy drivers (LSPxxx), the hardware specific > > features > > + are configured through proprietary IOCTLs at the fb device interface. > > Since > > + sub devices > > I think it's either "sub-devices" or "subdevices"... > > > are going to support device nodes, application will be able > > + to configure the hardware feayture > > Only "feature". > > > directly by opening the osd sub device > > + node and by calling the related IOCTL. So these proprietary IOCTLs are > > + to be removed from the FB Device driver when doing up port of these > > drivers to > > + mainline kernel. The V4L2 and FB device nodes supports only IOCTLS as > > per > > + the associated spec. The rest of the IOCTLs are to be moved to osd and > > + venc sub devices. > > + > > + Current status:- > > + > > + A build tested version of vpbe controller is available. > > + > > + Following are TBDs. > > + > > + vpbe display controller > > + - review and modify the handling of external encoders. > > + - add support for selecting external encoder as default at probe time. > > + > > + vpbe venc sub device > > + - add timings for supporting ths8200 > > + - add support for LogicPD LCD. > > + > > + v4l2 driver > > + - A version is already developed which is to be cleaned up and > > + unit tested > > + > > + FB drivers > > + - Add support for fbdev drivers.- > > Forgot newline here? > > > Ready and part of subsequent patches. > > \ No newline at end of file > > Here as well. :-) > > WBR, Sergei >
-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
