Hello,
On 12/17/2010 08:43 AM, Hyunwoong Kim wrote:
> The main scaler has four SFRs for main scaler ratio depends on FIMC version.
> FIMC 4.x has only two SFRs and FIMC 5.x has four SFRs for main scaler.
> Those are MainHorRatio, MainHorRatio_ext, MainVerRatio and MainverRatio_ext.
>
> The FIMC 5.x has 15 bit resolution for scaling ratio as below.
> {MainHorRatio,MainHorRatio_ext} = {[14:6],[5:0]}.
> {MainVerRatio,MainVerRatio_ext} = {[14:6],[5:0]}.
> MainHorRatio = CISCCTRL[24:16], MainHorRatio_ext = CIEXTEN[15:10]
> MainVerRatio = CISCCTRL[8:0], MainVerRatio_ext = CIEXTEN[5:0]
>
> This patch supports FIMC 4.x and FIMC 5.x using
> platform_device_id::driver_data.
>
> Signed-off-by: Hyunwoong Kim <khw0178....@samsung.com>
> Reviewed-by: Jonghun Han <jonghun....@samsung.com>
> ---
> drivers/media/video/s5p-fimc/fimc-capture.c | 7 +++-
> drivers/media/video/s5p-fimc/fimc-core.c | 21 ++++++++++--
> drivers/media/video/s5p-fimc/fimc-core.h | 5 ++-
> drivers/media/video/s5p-fimc/fimc-reg.c | 48 ++++++++++++++++++++++++--
> drivers/media/video/s5p-fimc/regs-fimc.h | 10 +++++-
> 5 files changed, 81 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c
> b/drivers/media/video/s5p-fimc/fimc-capture.c
> index b216530..ca48e02 100644
> --- a/drivers/media/video/s5p-fimc/fimc-capture.c
> +++ b/drivers/media/video/s5p-fimc/fimc-capture.c
> @@ -208,6 +208,7 @@ static int start_streaming(struct vb2_queue *q)
> struct fimc_ctx *ctx = q->drv_priv;
> struct fimc_dev *fimc = ctx->fimc_dev;
> struct s3c_fimc_isp_info *isp_info;
> + struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
> int ret;
>
> ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_stream, 1);
> @@ -230,7 +231,11 @@ static int start_streaming(struct vb2_queue *q)
> return ret;
> }
> fimc_hw_set_input_path(ctx);
> - fimc_hw_set_scaler(ctx);
> + fimc_hw_set_prescaler(ctx);
> + if (!variant->has_mainscaler_ext)
> + fimc_hw_set_mainscaler(ctx);
> + else
> + fimc_hw_set_mainscaler_ext(ctx);
> fimc_hw_set_target_format(ctx);
> fimc_hw_set_rotation(ctx);
> fimc_hw_set_effect(ctx);
> diff --git a/drivers/media/video/s5p-fimc/fimc-core.c
> b/drivers/media/video/s5p-fimc/fimc-core.c
> index 7f56987..3cfa4b6 100644
> --- a/drivers/media/video/s5p-fimc/fimc-core.c
> +++ b/drivers/media/video/s5p-fimc/fimc-core.c
> @@ -246,6 +246,7 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx)
> struct fimc_scaler *sc = &ctx->scaler;
> struct fimc_frame *s_frame = &ctx->s_frame;
> struct fimc_frame *d_frame = &ctx->d_frame;
> + struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
> int tx, ty, sx, sy;
> int ret;
>
> @@ -284,8 +285,13 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx)
> sc->pre_dst_width = sx / sc->pre_hratio;
> sc->pre_dst_height = sy / sc->pre_vratio;
>
> - sc->main_hratio = (sx << 8) / (tx << sc->hfactor);
> - sc->main_vratio = (sy << 8) / (ty << sc->vfactor);
> + if (!variant->has_mainscaler_ext) {
> + sc->main_hratio = (sx << 8) / (tx << sc->hfactor);
> + sc->main_vratio = (sy << 8) / (ty << sc->vfactor);
> + } else {
> + sc->main_hratio = (sx << 14) / (tx << sc->hfactor);
> + sc->main_vratio = (sy << 14) / (ty << sc->vfactor);
> + }
>
> sc->scaleup_h = (tx >= sx) ? 1 : 0;
> sc->scaleup_v = (ty >= sy) ? 1 : 0;
> @@ -569,6 +575,7 @@ static void fimc_dma_run(void *priv)
> {
> struct fimc_ctx *ctx = priv;
> struct fimc_dev *fimc;
> + struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
> unsigned long flags;
> u32 ret;
>
> @@ -601,7 +608,12 @@ static void fimc_dma_run(void *priv)
> err("Scaler setup error");
> goto dma_unlock;
> }
> - fimc_hw_set_scaler(ctx);
> +
> + fimc_hw_set_prescaler(ctx);
> + if (!variant->has_mainscaler_ext)
> + fimc_hw_set_mainscaler(ctx);
> + else
> + fimc_hw_set_mainscaler_ext(ctx);
> fimc_hw_set_target_format(ctx);
> fimc_hw_set_rotation(ctx);
> fimc_hw_set_effect(ctx);
> @@ -1722,6 +1734,7 @@ static struct samsung_fimc_variant
> fimc1_variant_s5pv210 = {
> .pix_hoff = 1,
> .has_inp_rot = 1,
> .has_out_rot = 1,
> + .has_mainscaler_ext = 1,
> .min_inp_pixsize = 16,
> .min_out_pixsize = 16,
> .hor_offs_align = 1,
> @@ -1743,6 +1756,7 @@ static struct samsung_fimc_variant
> fimc0_variant_s5pv310 = {
> .has_inp_rot = 1,
> .has_out_rot = 1,
> .has_cistatus2 = 1,
> + .has_mainscaler_ext = 1,
> .min_inp_pixsize = 16,
> .min_out_pixsize = 16,
> .hor_offs_align = 1,
> @@ -1753,6 +1767,7 @@ static struct samsung_fimc_variant
> fimc0_variant_s5pv310 = {
> static struct samsung_fimc_variant fimc2_variant_s5pv310 = {
> .pix_hoff = 1,
> .has_cistatus2 = 1,
> + .has_mainscaler_ext = 1,
> .min_inp_pixsize = 16,
> .min_out_pixsize = 16,
> .hor_offs_align = 1,
> diff --git a/drivers/media/video/s5p-fimc/fimc-core.h
> b/drivers/media/video/s5p-fimc/fimc-core.h
> index 4efc1a1..dd5b949 100644
> --- a/drivers/media/video/s5p-fimc/fimc-core.h
> +++ b/drivers/media/video/s5p-fimc/fimc-core.h
> @@ -380,6 +380,7 @@ struct samsung_fimc_variant {
> unsigned int has_inp_rot:1;
> unsigned int has_out_rot:1;
> unsigned int has_cistatus2:1;
> + unsigned int has_mainscaler_ext:1;
Please add a short description for this new field, e.g.
@has_mainscaler_ext: 1 if the extended main scaler ratios register is available
> struct fimc_pix_limit *pix_limit;
> u16 min_inp_pixsize;
> u16 min_out_pixsize;
> @@ -575,7 +576,9 @@ void fimc_hw_set_target_format(struct fimc_ctx *ctx);
> void fimc_hw_set_out_dma(struct fimc_ctx *ctx);
> void fimc_hw_en_lastirq(struct fimc_dev *fimc, int enable);
> void fimc_hw_en_irq(struct fimc_dev *fimc, int enable);
> -void fimc_hw_set_scaler(struct fimc_ctx *ctx);
> +void fimc_hw_set_prescaler(struct fimc_ctx *ctx);
> +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx);
> +void fimc_hw_set_mainscaler_ext(struct fimc_ctx *ctx);
> void fimc_hw_en_capture(struct fimc_ctx *ctx);
> void fimc_hw_set_effect(struct fimc_ctx *ctx);
> void fimc_hw_set_in_dma(struct fimc_ctx *ctx);
> diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c
> b/drivers/media/video/s5p-fimc/fimc-reg.c
> index 5ed8f06..bc75298 100644
> --- a/drivers/media/video/s5p-fimc/fimc-reg.c
> +++ b/drivers/media/video/s5p-fimc/fimc-reg.c
> @@ -249,7 +249,7 @@ void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable)
> writel(cfg, dev->regs + S5P_CIOCTRL);
> }
>
> -static void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
> +void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
> {
> struct fimc_dev *dev = ctx->fimc_dev;
> struct fimc_scaler *sc = &ctx->scaler;
> @@ -267,7 +267,7 @@ static void fimc_hw_set_prescaler(struct fimc_ctx *ctx)
> writel(cfg, dev->regs + S5P_CISCPREDST);
> }
>
> -void fimc_hw_set_scaler(struct fimc_ctx *ctx)
> +static void fimc_hw_set_scaler(struct fimc_ctx *ctx)
> {
> struct fimc_dev *dev = ctx->fimc_dev;
> struct fimc_scaler *sc = &ctx->scaler;
> @@ -275,8 +275,6 @@ void fimc_hw_set_scaler(struct fimc_ctx *ctx)
> struct fimc_frame *dst_frame = &ctx->d_frame;
> u32 cfg = 0;
>
> - fimc_hw_set_prescaler(ctx);
> -
> if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
> cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE);
>
> @@ -316,15 +314,57 @@ void fimc_hw_set_scaler(struct fimc_ctx *ctx)
> cfg |= S5P_CISCCTRL_INTERLACE;
> }
>
> + writel(cfg, dev->regs + S5P_CISCCTRL);
> +}
> +
> +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx)
> +{
> + struct fimc_dev *dev = ctx->fimc_dev;
> + struct fimc_scaler *sc = &ctx->scaler;
> + u32 cfg;
> +
> dbg("main_hratio= 0x%X main_vratio= 0x%X",
> sc->main_hratio, sc->main_vratio);
>
> + fimc_hw_set_scaler(ctx);
> +
> + cfg = readl(dev->regs + S5P_CISCCTRL);
> + cfg &= ~S5P_CISCCTRL_SC_HORRATIO_MASK;
> + cfg &= ~S5P_CISCCTRL_SC_VERRATIO_MASK;
> cfg |= S5P_CISCCTRL_SC_HORRATIO(sc->main_hratio);
> cfg |= S5P_CISCCTRL_SC_VERRATIO(sc->main_vratio);
>
> writel(cfg, dev->regs + S5P_CISCCTRL);
> }
>
> +void fimc_hw_set_mainscaler_ext(struct fimc_ctx *ctx)
> +{
> + struct fimc_dev *dev = ctx->fimc_dev;
> + struct fimc_scaler *sc = &ctx->scaler;
> + u32 cfg, cfg_ext;
> +
> + dbg("main_hratio= 0x%X main_vratio= 0x%X",
> + sc->main_hratio, sc->main_vratio);
> +
> + fimc_hw_set_scaler(ctx);
> +
> + cfg = readl(dev->regs + S5P_CISCCTRL);
> + cfg &= ~S5P_CISCCTRL_SC_HORRATIO_MASK;
> + cfg &= ~S5P_CISCCTRL_SC_VERRATIO_MASK;
> + cfg |= S5P_CISCCTRL_SC_HORRATIO_EXT(sc->main_hratio);
> + cfg |= S5P_CISCCTRL_SC_VERRATIO_EXT(sc->main_vratio);
> +
> + writel(cfg, dev->regs + S5P_CISCCTRL);
> +
> + cfg_ext = readl(dev->regs + S5P_CIEXTEN);
> + cfg_ext &= ~S5P_CIEXTEN_MAINHORRATIO_EXT_MASK;
> + cfg_ext &= ~S5P_CIEXTEN_MAINVERRATIO_EXT_MASK;
> + cfg_ext |= S5P_CIEXTEN_MAINHORRATIO_EXT(sc->main_hratio);
> + cfg_ext |= S5P_CIEXTEN_MAINVERRATIO_EXT(sc->main_vratio);
> +
> + writel(cfg_ext, dev->regs + S5P_CIEXTEN);
> +}
> +
> void fimc_hw_en_capture(struct fimc_ctx *ctx)
> {
> struct fimc_dev *dev = ctx->fimc_dev;
> diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h
> b/drivers/media/video/s5p-fimc/regs-fimc.h
> index 57e33f8..4d1abd1 100644
> --- a/drivers/media/video/s5p-fimc/regs-fimc.h
> +++ b/drivers/media/video/s5p-fimc/regs-fimc.h
> @@ -141,6 +141,10 @@
> #define S5P_CISCCTRL_ONE2ONE (1 << 9)
> #define S5P_CISCCTRL_SC_HORRATIO(x) ((x) << 16)
> #define S5P_CISCCTRL_SC_VERRATIO(x) ((x) << 0)
> +#define S5P_CISCCTRL_SC_HORRATIO_MASK (0x1ff << 16)
> +#define S5P_CISCCTRL_SC_VERRATIO_MASK (0x1ff << 0)
> +#define S5P_CISCCTRL_SC_HORRATIO_EXT(x) ((x >> 6) << 16)
> +#define S5P_CISCCTRL_SC_VERRATIO_EXT(x) ((x >> 6) << 0)
x need to be enclosed in brackets. Also the names are getting long,
so although we have S5P_CISCCTRL_SC_HORRATIO and S5P_CISCCTRL_SC_VERRATIO,
how about?
+#define S5P_CISCCTRL_SC_HRATIO_MASK (0x1ff << 16)
+#define S5P_CISCCTRL_SC_VRATIO_MASK (0x1ff << 0)
+#define S5P_CISCCTRL_SC_HRATIO_EXT(x) (((x) >> 6) << 16)
+#define S5P_CISCCTRL_SC_VRATIO_EXT(x) (((x) >> 6) << 0)
>
> /* Target area */
> #define S5P_CITAREA 0x5c
> @@ -262,7 +266,11 @@
> #define S5P_ORIG_SIZE_HOR(x) ((x) << 0)
>
> /* Real output DMA image size (extension register) */
> -#define S5P_CIEXTEN 0x188
> +#define S5P_CIEXTEN 0x188
> +#define S5P_CIEXTEN_MAINHORRATIO_EXT(x) (((x) & 0x3f) << 10)
> +#define S5P_CIEXTEN_MAINVERRATIO_EXT(x) ((x) & 0x3f)
> +#define S5P_CIEXTEN_MAINHORRATIO_EXT_MASK (0x3f << 10)
> +#define S5P_CIEXTEN_MAINVERRATIO_EXT_MASK (0x3f)
No need to enclose 0x3f in brackets. How about:
+#define S5P_CIEXTEN_MHRATIO_EXT(x) (((x) & 0x3f) << 10)
+#define S5P_CIEXTEN_MVRATIO_EXT(x) ((x) & 0x3f)
+#define S5P_CIEXTEN_MHRATIO_EXT_MASK (0x3f << 10)
+#define S5P_CIEXTEN_MVRATIO_EXT_MASK 0x3f
?
> #define S5P_CIDMAPARAM 0x18c
> #define S5P_CIDMAPARAM_R_LINEAR (0 << 29)
Please also consider Kyungmin's remarks about negations in conditional
expressions, it's also my preference.
Regards,
Sylwester
--
Sylwester Nawrocki
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
