On Sunday, January 09, 2011 17:55:40 Jonathan Corbet wrote:
> On Sat, 8 Jan 2011 12:01:43 +0100
> Hans Verkuil <[email protected]> wrote:
>
> > This patch series converts the OLPC cafe_ccic driver to the new control
> > framework. It turned out that this depended on the removal of the legacy
> > s_config subdev operation. I originally created the ov7670 controls in
> > s_config, but it turned out that s_config is called after
> > v4l2_device_register_subdev,
> > so v4l2_device_register_subdev is unable to 'inherit' the ov7670 controls
> > in cafe_ccic since there aren't any yet.
> >
> > Another reason why s_config is a bad idea.
> >
> > So the first patch removes s_config and v4l2_i2c_new_subdev_cfg and converts
> > any users (cafe_ccic/ov7670 among them) to v4l2_i2c_new_subdev_board, which
> > is
> > what God (i.e. Jean Delvare) intended. :-)
>
> I've been "vacationing" with the in-laws in Europe for the last couple of
> weeks; just got back home last night. Body clock is still in transit
> somewhere.
>
> Anyway, I've looked the patches over quickly and can't find anything to
> really complain about, but I can't claim to have done an in-depth review.
> Before it's merged, it would be nice to let the OLPC folks take a look
> (adding Daniel to Cc). It also would be really nice to know that the
> reworked ov7670 driver still plays nice with the via-camera driver. I can
> try to find time to check that out, but my time between now and LCA/FOSDEM
> is going to be tight indeed.
The via_camera driver should work just fine with the converted ov7670.
However, if someone can test the via_camera driver, then it's best to convert
the via_camera driver to the control framework as well and test that at the
same time. I've whipped up a patch for that and I've included it at the end.
Note that I saw that the via_camera struct was never freed in via_camera.c.
I've fixed that.
> > This has been extensively tested on my humble OLPC laptop (and it took me
> > 4-5
> > hours just to get the damn thing up and running with these drivers).
>
> My experience with the XO is always the same; it's a real pain to get
> things going after I've been away from it for a while.
>
> > The way this works is that setting the gain on its own will turn off
> > autogain
> > (this conforms to the current behavior of ov7670), setting autogain and gain
> > atomically will only set the gain if autogain is set to manual.
> >
> > Ditto for exposure/autoexposure.
> >
> > The only question is: is the current behavior of implicitly turning off
> > autogain
> > when setting a new gain value correct? I think setting the gain in that case
> > should do nothing.
>
> I did it that way years ago because it seemed to me that, if the
> application is setting the gain, it should actually set the gain. I still
> think that is the behavior that makes sense. I don't know that anybody is
> tied to that behavior, though, so it probably makes more sense to do what
> all the other drivers do, whatever that is.
Good question: 'whatever that is' :-)
I will leave it as is for now.
Regards,
Hans
>From 39c39c9d0e5009e140822d9223fc7ac02ae04ac9 Mon Sep 17 00:00:00 2001
Message-Id:
<39c39c9d0e5009e140822d9223fc7ac02ae04ac9.1294596207.git.hverk...@xs4all.nl>
From: Hans Verkuil <[email protected]>
Date: Sun, 9 Jan 2011 18:55:02 +0100
Subject: [PATCH] via-camera: implement the control framework.
And added a missing kfree to clean up the via_camera struct.
Signed-off-by: Hans Verkuil <[email protected]>
---
drivers/media/video/via-camera.c | 60 +++++++++-----------------------------
1 files changed, 14 insertions(+), 46 deletions(-)
diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index e25aca5..57538a3 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -19,6 +19,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#include <media/videobuf-dma-sg.h>
#include <linux/device.h>
#include <linux/delay.h>
@@ -64,6 +65,7 @@ enum viacam_opstate { S_IDLE = 0, S_RUNNING = 1 };
struct via_camera {
struct v4l2_device v4l2_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
struct video_device vdev;
struct v4l2_subdev *sensor;
struct platform_device *platdev;
@@ -823,47 +825,6 @@ static int viacam_g_chip_ident(struct file *file, void
*priv,
}
/*
- * Control ops are passed through to the sensor.
- */
-static int viacam_queryctrl(struct file *filp, void *priv,
- struct v4l2_queryctrl *qc)
-{
- struct via_camera *cam = priv;
- int ret;
-
- mutex_lock(&cam->lock);
- ret = sensor_call(cam, core, queryctrl, qc);
- mutex_unlock(&cam->lock);
- return ret;
-}
-
-
-static int viacam_g_ctrl(struct file *filp, void *priv,
- struct v4l2_control *ctrl)
-{
- struct via_camera *cam = priv;
- int ret;
-
- mutex_lock(&cam->lock);
- ret = sensor_call(cam, core, g_ctrl, ctrl);
- mutex_unlock(&cam->lock);
- return ret;
-}
-
-
-static int viacam_s_ctrl(struct file *filp, void *priv,
- struct v4l2_control *ctrl)
-{
- struct via_camera *cam = priv;
- int ret;
-
- mutex_lock(&cam->lock);
- ret = sensor_call(cam, core, s_ctrl, ctrl);
- mutex_unlock(&cam->lock);
- return ret;
-}
-
-/*
* Only one input.
*/
static int viacam_enum_input(struct file *filp, void *priv,
@@ -1219,9 +1180,6 @@ static int viacam_enum_frameintervals(struct file *filp,
void *priv,
static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
.vidioc_g_chip_ident = viacam_g_chip_ident,
- .vidioc_queryctrl = viacam_queryctrl,
- .vidioc_g_ctrl = viacam_g_ctrl,
- .vidioc_s_ctrl = viacam_s_ctrl,
.vidioc_enum_input = viacam_enum_input,
.vidioc_g_input = viacam_g_input,
.vidioc_s_input = viacam_s_input,
@@ -1320,8 +1278,12 @@ static __devinit int viacam_probe(struct platform_device
*pdev)
ret = v4l2_device_register(&pdev->dev, &cam->v4l2_dev);
if (ret) {
dev_err(&pdev->dev, "Unable to register v4l2 device\n");
- return ret;
+ goto out_free;
}
+ ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10);
+ if (ret)
+ goto out_unregister;
+ cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler;
/*
* Convince the system that we can do DMA.
*/
@@ -1338,7 +1300,7 @@ static __devinit int viacam_probe(struct platform_device
*pdev)
*/
ret = via_sensor_power_setup(cam);
if (ret)
- goto out_unregister;
+ goto out_ctrl_hdl_free;
via_sensor_power_up(cam);
/*
@@ -1379,8 +1341,12 @@ out_irq:
free_irq(viadev->pdev->irq, cam);
out_power_down:
via_sensor_power_release(cam);
+out_ctrl_hdl_free:
+ v4l2_ctrl_handler_free(&cam->ctrl_handler);
out_unregister:
v4l2_device_unregister(&cam->v4l2_dev);
+out_free:
+ kfree(cam);
return ret;
}
@@ -1393,6 +1359,8 @@ static __devexit int viacam_remove(struct platform_device
*pdev)
v4l2_device_unregister(&cam->v4l2_dev);
free_irq(viadev->pdev->irq, cam);
via_sensor_power_release(cam);
+ v4l2_ctrl_handler_free(&cam->ctrl_handler);
+ kfree(cam);
via_cam_info = NULL;
return 0;
}
--
1.7.0.4
--
Hans Verkuil - video4linux developer - sponsored by Cisco
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
