When registering an IR Rx device with the I2C subsystem, provide more detailed
information about the IR device and default remote configuration for the IR
driver modules.
Also explicitly register any IR Tx device with the I2C subsystem.
Signed-off-by: Andy Walls <awa...@md.metrocast.net>
Cc: Mike Isely <is...@isely.net>
--
Mike,
As discussed on IRC, this patch will enable lirc_zilog to bind to Zilog
Z8 IR units on devices supported by pvrusb2.
Please review and comment. This patch could have been written a number
of ways. The way I chose was very direct: hard-coding information in a
single function.
A git branch with this change, and the updated lirc_zilog, is here:
git://linuxtv.org/awalls/media_tree.git z8-pvrusb2
http://git.linuxtv.org/awalls/media_tree.git?a=shortlog;h=refs/heads/z8-pvrusb2
Regards,
Andy
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index ac94a8b..305e6aa 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -40,6 +40,7 @@
#include "pvrusb2-io.h"
#include <media/v4l2-device.h>
#include <media/cx2341x.h>
+#include <media/ir-kbd-i2c.h>
#include "pvrusb2-devattr.h"
/* Legal values for PVR2_CID_HSM */
@@ -202,6 +203,7 @@ struct pvr2_hdw {
/* IR related */
unsigned int ir_scheme_active; /* IR scheme as seen from the outside */
+ struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */
/* Frequency table */
unsigned int freqTable[FREQTABLE_SIZE];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 7cbe18c..ccc8849 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -19,6 +19,7 @@
*/
#include <linux/i2c.h>
+#include <media/ir-kbd-i2c.h>
#include "pvrusb2-i2c-core.h"
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-debug.h"
@@ -48,13 +49,6 @@ module_param_named(disable_autoload_ir_video,
pvr2_disable_ir_video,
MODULE_PARM_DESC(disable_autoload_ir_video,
"1=do not try to autoload ir_video IR receiver");
-/* Mapping of IR schemes to known I2C addresses - if any */
-static const unsigned char ir_video_addresses[] = {
- [PVR2_IR_SCHEME_ZILOG] = 0x71,
- [PVR2_IR_SCHEME_29XXX] = 0x18,
- [PVR2_IR_SCHEME_24XXX] = 0x18,
-};
-
static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */
u8 i2c_addr, /* I2C address we're talking to */
u8 *data, /* Data to write */
@@ -574,26 +568,56 @@ static void do_i2c_scan(struct pvr2_hdw *hdw)
static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
{
struct i2c_board_info info;
- unsigned char addr = 0;
+ struct IR_i2c_init_data *init_data = &hdw->ir_init_data;
if (pvr2_disable_ir_video) {
pvr2_trace(PVR2_TRACE_INFO,
"Automatic binding of ir_video has been disabled.");
return;
}
- if (hdw->ir_scheme_active < ARRAY_SIZE(ir_video_addresses)) {
- addr = ir_video_addresses[hdw->ir_scheme_active];
- }
- if (!addr) {
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ switch (hdw->ir_scheme_active) {
+ case PVR2_IR_SCHEME_24XXX: /* FX2-controlled IR */
+ case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */
+ init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
+ init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
+ init_data->type = RC_TYPE_RC5;
+ init_data->name = hdw->hdw_desc->description;
+ init_data->polling_interval = 100; /* ms From ir-kbd-i2c */
+ /* IR Receiver */
+ info.addr = 0x18;
+ info.platform_data = init_data;
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.",
+ info.type, info.addr);
+ i2c_new_device(&hdw->i2c_adap, &info);
+ break;
+ case PVR2_IR_SCHEME_ZILOG: /* HVR-1950 style */
+ case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */
+ init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
+ init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+ init_data->type = RC_TYPE_RC5;
+ init_data->name = hdw->hdw_desc->description;
+ init_data->polling_interval = 260; /* ms From lirc_zilog */
+ /* IR Receiver */
+ info.addr = 0x71;
+ info.platform_data = init_data;
+ strlcpy(info.type, "ir_rx_z8f0811_haup", I2C_NAME_SIZE);
+ pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.",
+ info.type, info.addr);
+ i2c_new_device(&hdw->i2c_adap, &info);
+ /* IR Trasmitter */
+ info.addr = 0x70;
+ info.platform_data = init_data;
+ strlcpy(info.type, "ir_tx_z8f0811_haup", I2C_NAME_SIZE);
+ pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.",
+ info.type, info.addr);
+ i2c_new_device(&hdw->i2c_adap, &info);
+ break;
+ default:
/* The device either doesn't support I2C-based IR or we
don't know (yet) how to operate IR on the device. */
- return;
+ break;
}
- pvr2_trace(PVR2_TRACE_INFO,
- "Binding ir_video to i2c address 0x%02x.", addr);
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- info.addr = addr;
- i2c_new_device(&hdw->i2c_adap, &info);
}
void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
