(a general request: could you please configure your mailer to wrap lines
at somewhere around 70 characters?)
On Tue, 18 Jan 2011, Qing Xu wrote:
> Hi,
>
> Our chip support both MIPI and parallel interface. The HW connection logic is
> sensor(such as ov5642) -> our MIPI controller(handle DPHY timing/ CSI-2
> things) -> our camera controller (handle DMA transmitting/ fmt/ size
> things). Now, I find the driver of sh_mobile_csi2.c, it seems like a
> CSI-2 driver, but I don't quite understand how it works:
> 1) how the host controller call into this driver?
This is a normal v4l2-subdev driver. Platform data for the
sh_mobile_ceu_camera driver provides a link to CSI2 driver data, then the
host driver loads the CSI2 driver, which then links itself into the
subdevice list. Look at arch/arm/mach-shmobile/board-ap4evb.c how the data
is linked:
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
.csi2_dev = &csi2_device.dev,
};
and in the hosz driver drivers/media/video/sh_mobile_ceu_camera.c look in
the sh_mobile_ceu_probe function below the lines:
csi2 = pcdev->pdata->csi2_dev;
if (csi2) {
...
> 2) how the host controller/sensor negotiate MIPI variable with this
> driver, such as D-PHY timing(hs_settle/hs_termen/clk_settle/clk_termen),
> number of lanes...?
Since I only had a limited number of MIPI setups, I haven't implemented
maximum flexibility. A part of the parameters is hard-coded, another part
is provided in the platform driver, yet another part is calculated
dynamically.
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
