This patch adds support for V4L2 video display to DM6446 EVM.
Support for SD and ED modes is provided, along with Composite
and Component outputs.Also added vpbe_config as a parameter for
dm644x_init_video to allow for registration of vpbe platform devices.
Signed-off-by: Manjunath Hadli <manjunath.ha...@ti.com>
Acked-by: Sekhar Nori <nsek...@ti.com>
---
arch/arm/mach-davinci/board-dm644x-evm.c | 108 +++++++++++++++++++++++++++++-
1 files changed, 107 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c
b/arch/arm/mach-davinci/board-dm644x-evm.c
index afa88ac..4a642dd 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -616,6 +616,112 @@ static void __init evm_init_i2c(void)
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standard timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
+ {
+ .name = "ntsc",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_525_60},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {11, 10},
+ .fps = {30000, 1001},
+ .left_margin = 0x79,
+ .upper_margin = 0x10,
+ },
+ {
+ .name = "pal",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_625_50},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {54, 59},
+ .fps = {25, 1},
+ .left_margin = 0x7E,
+ .upper_margin = 0x16,
+ },
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+ {
+ .name = "480p59_94",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_480P59_94},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {1, 1},
+ .fps = {5994, 100},
+ .left_margin = 0x80,
+ .upper_margin = 0x20,
+ },
+ {
+ .name = "576p50",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_576P50},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {1, 1},
+ .fps = {50, 1},
+ .left_margin = 0x7E,
+ .upper_margin = 0x30,
+ },
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing),
+ .modes = dm644xevm_enc_std_timing,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_PRESETS,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "480p59_94",
+ .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing),
+ .modes = dm644xevm_enc_preset_timing,
+ },
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+ .module_name = "dm644x-vpbe-display",
+ .i2c_adapter_id = 1,
+ .osd = {
+ .module_name = VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs),
+ .outputs = dm644xevm_vpbe_outputs,
+};
+
static struct platform_device *davinci_evm_devices[] __initdata = {
&davinci_fb_device,
&rtc_dev,
@@ -699,7 +805,7 @@ static __init void davinci_evm_init(void)
evm_init_i2c();
davinci_setup_mmc(0, &dm6446evm_mmc_config);
- dm644x_init_video(&dm644xevm_capture_cfg, NULL);
+ dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_evm_snd_data);
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
