Nayden Kanchev wrote:
> Hi Sakari,
>
> Thanks for the update. I have just one comment about strobe types.
Hi Nayden,
Thanks for the comments!
> <snip>
>
>
> On 04/06/2011 11:10 AM, Sakari Ailus wrote:
>> - Added an open question on a new control:
>> V4L2_CID_FLASH_EXTERNAL_STROBE_WHENCE.
>>
>>
>>
> <snip>
>> 2. External strobe edge / level
>> -------------------------------
>>
>> No use is seen currently for this, but it may well appear, and the
>> hardware supports this. Level based trigger should be used since it is
>> more precise.
>>
>> V4L2_CID_FLASH_EXTERNAL_STROBE_WHENCE
>>
>> Whether the flash controller considers external strobe as edge, when the
>> only limit of the strobe is the timeout on flash controller, or level,
>> when the flash strobe will last as long as the strobe signal, or as long
>> until the timeout expires.
>>
>> enum v4l2_flash_external_strobe_whence {
>> V4L2_CID_FLASH_EXTERNAL_STROBE_LEVEL,
>> V4L2_CID_FLASH_EXTERNAL_STROBE_EDGE,
>> };
Removed "CID_":
enum v4l2_flash_external_strobe_whence {
V4L2_FLASH_EXTERNAL_STROBE_LEVEL,
V4L2_FLASH_EXTERNAL_STROBE_EDGE,
};
I guess this should be an rw menu control for LED flash?
>
> I agree that control over the strobe usage (level/edge) is required.
> Although we have some bad experience will lack of detailed information
> how exactly the flash chip will use those signals.
>
> For example with AS3645A flash driver strobing by edge produced really
> strange flash output - light intensity was changing during the process
> and flash was stopped before the HW timeout.
>
> On the other hand strobing by level didn't cause problems.
>
> So even if HW supports some functionally we should prevent such
> malfunctioning by adding some restrictions in the board code also.
I agree.
The control should be probably exposed to tell which kind of
functionality does the flash chip provide, even if the menu has just one
option in it.
> I would also rename xxx_STROBE_WHENCE to xxx_STROBE_TYPE but it is just
> a suggestion :)
Sounds good to me.
V4L2_CID_FLASH_STROBE_MODE should be renamed to
V4L2_CID_FLASH_STROBE_WHENCE. That proper use of whence IMO. :-)
Regards,
--
Sakari Ailus
[email protected]
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
