Hello Guennadi,
> > > static struct i2c_board_info i2c0_devices[] = {
> > > {
> > > I2C_BOARD_INFO("ag5evm_ts", 0x20),
> > > .irq = pint2irq(12), /* PINTC3 */
> > > },
> > > + /* 2M camera */
> > > + {
> > > + I2C_BOARD_INFO("rj65na20", 0x40),
> > > + },
> >
> > No, you do not have to include this here, the sensor must not be registered
> > automatically during the board initialisation.
I have one more question before sleeping :)
The camera module needs to be initialized by writing values to the registers.
Do I need to write init function at the following?
static const struct v4l2_subdev_core_ops rj65na20_core_ops = {
.reset = rj65na20_reset,
[snip]
}
With kind regards,
Akira
--
Akira Tsukamoto
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
