On Mon, 2011-04-18 at 18:48 -0400, Eric B Munson wrote:
> On Mon, 18 Apr 2011, Andy Walls wrote:
>
> > Eric B Munson <[email protected]> wrote:
> >
> > >On Mon, 11 Apr 2011, Eric B Munson wrote:
> > >
> > >> On Sun, 10 Apr 2011, Andy Walls wrote:
> > >>
> > >> > On Wed, 2011-04-06 at 13:28 -0400, Eric B Munson wrote:
> > >> > > On Tue, Apr 5, 2011 at 10:58 AM, Andy Walls
> > >
> > >Is there anything else I can provide to help with this?
> >
> > Eric,
> >
> > Sorry for not getting back sooner (I've been dealing with a personal
> situation and haven't logged into my dev system for a few weeks).
> >
> > What rf analog source are you using?
>
> Sorry, very new to this, I am not sure what you are asking for here.
I mean: analog cable, DTV Set Top Box (STB), VCR, etc.
I have only tested the driver on analog US Broadcast Channel 3, since I
only have a DTV STB as an RF analog TV source.
> > Have you used v4l2-ctl to ensure the tuner is set to the right tv
> standard (my changes default to NTSC-M)?
>
> emunson@grover:~$ v4l2-ctl -S
> Video Standard = 0x0000b000
> NTSC-M/M-JP/M-KR
> emunson@grover:~$ v4l2-ctl -s ntsc
> Standard set to 0000b000
> emunson@grover:~$ v4l2-ctl -S
> Video Standard = 0x0000b000
> NTSC-M/M-JP/M-KR
>
> What should the default be? NTSC-443? When I set to NTSC-443 I see
> the same behaviour as below when I try and change channels.
NTSC-M is the default. Having it set to autodetect the US, Japanese
(-JP), or South Korean (-KR) variants is OK.
Never use NTSC-443 as you likely will never encounter it in your life.
NTSC-443 is never broadcast over the air or cable. It is a weird
combination of NTSC video usings a PAL color subcarrier frequency.
> > Have you used v4l2-ctl or ivtv-tune to tune to the proper tv channel
> (the driver defaults to US channel 4)?
>
> emunson@grover:~$ v4l2-ctl -F
> Frequency: 0 (0.000000 MHz)
> emunson@grover:~$ v4l2-ctl -f 259.250
> Frequency set to 4148 (259.250000 MHz)
> emunson@grover:~$ v4l2-ctl -F
> Frequency: 0 (0.000000 MHz)
OK, that doesn't look good. The tda18271 tuner and/or tda8290 demod
drivers may not be working right.
I'll have to look into that later this week.
BTW, Mike Krufky just submitted some patches that may be relevant:
http://kernellabs.com/hg/~mkrufky/tda18271-fix
>
> > Does v4l2-ctl --log-status still show no signal present for the '843 core
> > in the CX23418?
>
> Yeah,
> [94465.349721] cx18-0 843: Video signal: not present
The tuner or demod isn't tuning to a channel or getting a signal.
Can you try channel 3 (61.250 MHz)? That one works for me.
> > Does mplayer /dev/videoN -cache 8192 have a tv station when set to the rf
> > analog input with v4l2-ctl?
>
> emunson@grover:~$ mplayer /dev/video0 -cache 8192
> MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team
>
> Playing /dev/video0.
> Cache fill: 0.00% (0 bytes)
>
>
> Exiting... (End of file)
Hmmm. I would have expected at least a black picture with snow, if not
tuned to a channel.
Does analog S-Video or Composite work?
Regards,
Andy
> >
> > From what I recall the analog tuner init looked ok.
> > -Andy
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
