Am 19.04.2011 23:21, schrieb Mauro Carvalho Chehab:
Em 04-04-2011 17:18, [email protected] escreveu:
From: Stefan Ringel<[email protected]>
add mts parameter
Stefan,
The MTS config depends on the specific board design (generally present on
mono NTSC cards). So, it should be inside the cards struct, and not
provided as an userspace parameter.
Mauro.
No. It wrong. I think edge board must work under all region and TV
standards and if I set MTS, it doesn't work in Germany (PAL_BG and
DVB-T). The best is to set outside region specific params.
.
Signed-off-by: Stefan Ringel<[email protected]>
---
drivers/staging/tm6000/tm6000-cards.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/tm6000/tm6000-cards.c
b/drivers/staging/tm6000/tm6000-cards.c
index 146c7e8..eef58da 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -61,6 +61,10 @@ module_param_array(card, int, NULL, 0444);
static unsigned long tm6000_devused;
+static unsigned int xc2028_mts;
+module_param(xc2028_mts, int, 0644);
+MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)");
+
struct tm6000_board {
char *name;
@@ -685,6 +689,9 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
ctl.demod = XC3028_FE_ZARLINK456;
ctl.vhfbw7 = 1;
ctl.uhfbw8 = 1;
+ if (xc2028_mts)
+ ctl.mts = 1;
+
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv =&ctl;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
