> -----Original Message----- > From: ext Mark Brown [mailto:broo...@opensource.wolfsonmicro.com] > Sent: 28. huhtikuuta 2011 14:15 > To: Jokiniemi Kalle (Nokia-SD/Tampere) > Cc: l...@slimlogic.co.uk; mche...@infradead.org; svarba...@mm-sol.com; > saagui...@ti.com; grosikopu...@mm-sol.com; Zutshi Vimarsh (Nokia- > SD/Helsinki); Ailus Sakari (Nokia-SD/Helsinki); linux-ker...@vger.kernel.org; > linux-media@vger.kernel.org > Subject: Re: [RFC] Regulator state after regulator_get > > On Thu, Apr 28, 2011 at 11:08:08AM +0000, kalle.jokini...@nokia.com wrote: > > > I don't have a full set of regulators described, that's why things broke > > when > > I tried the regulator_full_constraints call earlier. But I don't think it > > would be > too > > big issue to check the current after boot configuration and define all the > > regulators as you suggest. I will try this approach. > > As I said in my previous mail if you've got a reagulator you don't know > about which is on you can give it an always_on constraint until you > figure out what (if anything) should be controlling it.
Yeps, I plan to check the PMIC for the regulators that are left on after boot In the current working setup and then put those "always_on" flags on those regulators in the final setup. Thanks for the help! - Kalle -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html