The RX-51 uses the CSIb IO complex for camera operation. The
board file is missing definition for the regulator supplying
the CSIb complex, so this is added for better power
management.
Signed-off-by: Kalle Jokiniemi <kalle.jokini...@nokia.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
b/arch/arm/mach-omap2/board-rx51-peripherals.c
index bbcb677..1324ba3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -337,6 +337,13 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
static struct regulator_consumer_supply rx51_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply rx51_vaux2_supplies[] = {
+ REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
+ {
+ .supply = "vaux2",
+ },
+};
+
static struct regulator_consumer_supply rx51_vaux3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
@@ -400,6 +407,8 @@ static struct regulator_init_data rx51_vaux2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supplies),
+ .consumer_supplies = rx51_vaux2_supplies,
};
/* VAUX3 - adds more power to VIO_18 rail */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
