Hello Chris
This applies fine against 2.6.39 stable, but the Twinhan VP-1041 uses the
keymap of Twinhan DTV CAB CI, so it's not a perfect fit for the Terratec
Cinergy S2 HD keymap. I assume from earlier postings in vdr-portal [1] Cinergy
S2 HD and Skystar 2 HD do share the same keymappings.
Here's a paste of the VP-1041 keymap, as it used to work with s2-liplianin:
/* Twinhan VP-1041 */
static struct ir_scancode ir_codes_mantis_vp1041[] = {
{ 0x29, KEY_POWER},
{ 0x28, KEY_FAVORITES},
{ 0x30, KEY_TEXT},
{ 0x17, KEY_INFO}, /* Preview */
{ 0x23, KEY_EPG},
{ 0x3b, KEY_F22}, /* Record List */
{ 0x3c, KEY_1},
{ 0x3e, KEY_2},
{ 0x39, KEY_3},
{ 0x36, KEY_4},
{ 0x22, KEY_5},
{ 0x20, KEY_6},
{ 0x32, KEY_7},
{ 0x26, KEY_8},
{ 0x24, KEY_9},
{ 0x2a, KEY_0},
{ 0x33, KEY_CANCEL},
{ 0x2c, KEY_BACK},
{ 0x15, KEY_CLEAR},
{ 0x3f, KEY_TAB},
{ 0x10, KEY_ENTER},
{ 0x14, KEY_UP},
{ 0x0d, KEY_RIGHT},
{ 0x0e, KEY_DOWN},
{ 0x11, KEY_LEFT},
{ 0x21, KEY_VOLUMEUP},
{ 0x35, KEY_VOLUMEDOWN},
{ 0x3d, KEY_CHANNELDOWN},
{ 0x3a, KEY_CHANNELUP},
{ 0x2e, KEY_RECORD},
{ 0x2b, KEY_PLAY},
{ 0x13, KEY_PAUSE},
{ 0x25, KEY_STOP},
{ 0x1f, KEY_REWIND},
{ 0x2d, KEY_FASTFORWARD},
{ 0x1e, KEY_PREVIOUS}, /* Replay |< */
{ 0x1d, KEY_NEXT}, /* Skip >| */
{ 0x0b, KEY_CAMERA}, /* Capture */
{ 0x0f, KEY_LANGUAGE}, /* SAP */
{ 0x18, KEY_MODE}, /* PIP */
{ 0x12, KEY_ZOOM}, /* Full screen */
{ 0x1c, KEY_SUBTITLE},
{ 0x2f, KEY_MUTE},
{ 0x16, KEY_F20}, /* L/R */
{ 0x38, KEY_F21}, /* Hibernate */
{ 0x37, KEY_SWITCHVIDEOMODE}, /* A/V */
{ 0x31, KEY_AGAIN}, /* Recall */
{ 0x1a, KEY_KPPLUS}, /* Zoom+ */
{ 0x19, KEY_KPMINUS}, /* Zoom- */
{ 0x27, KEY_RED},
{ 0x0C, KEY_GREEN},
{ 0x01, KEY_YELLOW},
{ 0x00, KEY_BLUE},
};
struct ir_scancode_table ir_codes_mantis_vp1041_table = {
.scan = ir_codes_mantis_vp1041,
.size = ARRAY_SIZE(ir_codes_mantis_vp1041),
};
EXPORT_SYMBOL_GPL(ir_codes_mantis_vp1041_table);
Maybe someone else can confirm this?
Regards
Lou@vdr-portal
[1] http://www.vdr-portal.de/board18-vdr-hardware/board13-
fernbedienungen/95304-falsches-mapping-mit-fb-von-skystar-hd2-unter-linux/
> Hello,
>
> This patch is a rework of a old patch I've posted some time ago.
> It adds support for Remote-Control in the mantis driver and implements the
> new rc-API.
> The patch enables rc for the cards
> - vp1041
> - vp2033
> - vp2040
>
> It's only tested with a Terratec Cinergy S2 HD.
> Would be nice to get some Feedback.
>
> Regards
> Chris
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
